From: Greg Kurz <gkurz@linux.vnet.ibm.com>
To: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Tom Musta <tommusta@gmail.com>,
qemu-ppc@nongnu.org, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [Qemu-ppc] [PATCH 9/9] spapr_hcall: Add address-translation-mode-on-interrupt resource in H_SET_MODE
Date: Wed, 21 May 2014 14:26:10 +0200 [thread overview]
Message-ID: <20140521142610.77d81a91@bahia.local> (raw)
In-Reply-To: <1400653228-31540-10-git-send-email-aik@ozlabs.ru>
On Wed, 21 May 2014 16:20:28 +1000
Alexey Kardashevskiy <aik@ozlabs.ru> wrote:
> This adds handling of the RESOURCE_ADDR_TRANS_MODE resource from
> the H_SET_MODE, for POWER8 (PowerISA 2.07) only.
>
> This defines AIL flags for LPCR special register.
>
> This changes @excp_prefix according to the mode, takes effect in TCG.
>
> This turns support of a new capability PPC2_ISA207S flag for TCG.
>
> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
> ---
> hw/ppc/spapr_hcall.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++
> include/hw/ppc/spapr.h | 5 +++++
> target-ppc/cpu.h | 4 +++-
> target-ppc/excp_helper.c | 7 +++++--
> 4 files changed, 60 insertions(+), 3 deletions(-)
>
> diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c
> index 443e2b6..e586c8b 100644
> --- a/hw/ppc/spapr_hcall.c
> +++ b/hw/ppc/spapr_hcall.c
> @@ -740,6 +740,49 @@ static target_ulong h_set_mode_resouce_le(PowerPCCPU *cpu,
> return H_UNSUPPORTED_FLAG;
> }
>
> +static target_ulong h_set_mode_resouce_addr_trans_mode(PowerPCCPU *cpu,
> + target_ulong mflags,
> + target_ulong value1,
> + target_ulong value2)
> +{
> + CPUState *cs;
> + PowerPCCPUClass *pcc = POWERPC_CPU_GET_CLASS(cpu);
> + target_ulong prefix;
> +
> + if (!(pcc->insns_flags2 & PPC2_ISA207S)) {
> + return H_P2;
> + }
> + if (value1) {
> + return H_P3;
> + }
> + if (value2) {
> + return H_P4;
> + }
> +
> + switch (mflags) {
> + case H_SET_MODE_ADDR_TRANS_NONE:
> + prefix = 0;
> + break;
> + case H_SET_MODE_ADDR_TRANS_0001_8000:
> + prefix = 0x18000;
> + break;
> + case H_SET_MODE_ADDR_TRANS_C000_0000_0000_4000:
> + prefix = 0xC000000000004000;
> + break;
> + default:
> + return H_UNSUPPORTED_FLAG;
> + }
> +
> + CPU_FOREACH(cs) {
> + CPUPPCState *env = &POWERPC_CPU(cpu)->env;
> +
> + set_spr(cs, SPR_LPCR, mflags << LPCR_AIL_SH, LPCR_AIL);
> + env->excp_prefix = prefix;
> + }
> +
> + return H_SUCCESS;
> +}
> +
> static target_ulong h_set_mode(PowerPCCPU *cpu, sPAPREnvironment *spapr,
> target_ulong opcode, target_ulong *args)
> {
> @@ -750,6 +793,10 @@ static target_ulong h_set_mode(PowerPCCPU *cpu, sPAPREnvironment *spapr,
> case H_SET_MODE_RESOURCE_LE:
> ret = h_set_mode_resouce_le(cpu, args[0], args[2], args[3]);
> break;
> + case H_SET_MODE_RESOURCE_ADDR_TRANS_MODE:
> + ret = h_set_mode_resouce_addr_trans_mode(cpu, args[0],
> + args[2], args[3]);
> + break;
> }
>
> return ret;
> diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
> index 9f8bb89..8a5705a 100644
> --- a/include/hw/ppc/spapr.h
> +++ b/include/hw/ppc/spapr.h
> @@ -164,6 +164,11 @@ typedef struct sPAPREnvironment {
> #define H_SET_MODE_ENDIAN_BIG 0
> #define H_SET_MODE_ENDIAN_LITTLE 1
>
> +/* Flags for H_SET_MODE_RESOURCE_ADDR_TRANS_MODE */
> +#define H_SET_MODE_ADDR_TRANS_NONE 0
> +#define H_SET_MODE_ADDR_TRANS_0001_8000 2
> +#define H_SET_MODE_ADDR_TRANS_C000_0000_0000_4000 3
> +
> /* VASI States */
> #define H_VASI_INVALID 0
> #define H_VASI_ENABLED 1
> diff --git a/target-ppc/cpu.h b/target-ppc/cpu.h
> index 52baf20..f435d0a 100644
> --- a/target-ppc/cpu.h
> +++ b/target-ppc/cpu.h
> @@ -466,6 +466,8 @@ struct ppc_slb_t {
> #define MSR_LE 0 /* Little-endian mode 1 hflags */
>
> #define LPCR_ILE (1 << (63-38))
> +#define LPCR_AIL 0x01800000 /* Alternate interrupt location */
> +#define LPCR_AIL_SH (63-40)
>
A decision was recently taken to get rid of magic numbers. What about the following ?
#define LPCR_AIL_SHIFT (63-40)
#define LPCR_AIL_MASK (3 << LPCR_AIL_SHIFT)
> #define msr_sf ((env->msr >> MSR_SF) & 1)
> #define msr_isf ((env->msr >> MSR_ISF) & 1)
> @@ -1971,7 +1973,7 @@ enum {
> PPC2_DIVE_ISA206 | PPC2_ATOMIC_ISA206 | \
> PPC2_FP_CVT_ISA206 | PPC2_FP_TST_ISA206 | \
> PPC2_BCTAR_ISA207 | PPC2_LSQ_ISA207 | \
> - PPC2_ALTIVEC_207)
> + PPC2_ALTIVEC_207 | PPC2_ISA207S)
> };
>
> /*****************************************************************************/
> diff --git a/target-ppc/excp_helper.c b/target-ppc/excp_helper.c
> index 4fa297d..de32319 100644
> --- a/target-ppc/excp_helper.c
> +++ b/target-ppc/excp_helper.c
> @@ -614,8 +614,11 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp)
> if (asrr1 != -1) {
> env->spr[asrr1] = env->spr[srr1];
> }
> - /* If we disactivated any translation, flush TLBs */
> - if (msr & ((1 << MSR_IR) | (1 << MSR_DR))) {
> +
> + if (env->spr[SPR_LPCR] & LPCR_AIL) {
> + new_msr |= (1 << MSR_IR) | (1 << MSR_DR);
> + } else if (msr & ((1 << MSR_IR) | (1 << MSR_DR))) {
> + /* If we disactivated any translation, flush TLBs */
> tlb_flush(cs, 1);
> }
>
--
Gregory Kurz kurzgreg@fr.ibm.com
gkurz@linux.vnet.ibm.com
Software Engineer @ IBM/Meiosys http://www.ibm.com
Tel +33 (0)562 165 496
"Anarchy is about taking complete responsibility for yourself."
Alan Moore.
prev parent reply other threads:[~2014-05-21 12:26 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-21 6:20 [Qemu-devel] [PATCH 0/9] POWER8 patches Alexey Kardashevskiy
2014-05-21 6:20 ` [Qemu-devel] [PATCH 1/9] target-ppc: Rename MMCR0/1 contants Alexey Kardashevskiy
2014-05-21 16:55 ` Tom Musta
2014-05-22 2:53 ` Alexey Kardashevskiy
2014-05-21 6:20 ` [Qemu-devel] [PATCH 2/9] target-ppc: Refactor init_proc_POWER7 Alexey Kardashevskiy
2014-05-21 10:44 ` Alexander Graf
2014-05-21 12:30 ` Alexey Kardashevskiy
2014-05-21 13:23 ` Alexander Graf
2014-05-22 3:59 ` Alexey Kardashevskiy
2014-05-22 7:08 ` Alexander Graf
2014-05-21 6:20 ` [Qemu-devel] [PATCH 3/9] target-ppc: Add POWER7 SPRs Alexey Kardashevskiy
2014-05-21 17:17 ` Tom Musta
2014-05-21 6:20 ` [Qemu-devel] [PATCH 4/9] target-ppc: Refactor init_proc_POWER8 Alexey Kardashevskiy
2014-05-21 17:22 ` Tom Musta
2014-05-21 6:20 ` [Qemu-devel] [PATCH 5/9] target-ppc: Add POWER8 SPRs Alexey Kardashevskiy
2014-05-21 10:47 ` Alexander Graf
2014-05-21 18:08 ` Tom Musta
2014-05-21 6:20 ` [Qemu-devel] [PATCH 6/9] target-ppc: Enable PPR and VRSAVE SPRs migration Alexey Kardashevskiy
2014-05-21 10:53 ` Alexander Graf
2014-05-21 6:20 ` [Qemu-devel] [PATCH 7/9] KVM: target-ppc: Enable transactional state migration Alexey Kardashevskiy
2014-05-21 18:11 ` Tom Musta
2014-05-22 2:50 ` Alexey Kardashevskiy
2014-05-22 11:39 ` Tom Musta
2014-05-21 6:20 ` [Qemu-devel] [PATCH 8/9] spapr_hcall: Split h_set_mode() Alexey Kardashevskiy
2014-05-21 6:20 ` [Qemu-devel] [PATCH 9/9] spapr_hcall: Add address-translation-mode-on-interrupt resource in H_SET_MODE Alexey Kardashevskiy
2014-05-21 11:44 ` Alexander Graf
2014-05-21 12:24 ` Alexey Kardashevskiy
2014-05-21 12:25 ` Alexander Graf
2014-05-21 12:26 ` Greg Kurz [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140521142610.77d81a91@bahia.local \
--to=gkurz@linux.vnet.ibm.com \
--cc=aik@ozlabs.ru \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=tommusta@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).