From: Jeff Cody <jcody@redhat.com>
To: Fam Zheng <famz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>, Benoit Canet <benoit@irqsave.net>,
qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>
Subject: Re: [Qemu-devel] [PATCH v2 6/8] block: Use bdrv_set_backing_hd everywhere
Date: Fri, 23 May 2014 10:31:28 -0400 [thread overview]
Message-ID: <20140523143128.GA5795@localhost.localdomain> (raw)
In-Reply-To: <1400851788-32588-7-git-send-email-famz@redhat.com>
On Fri, May 23, 2014 at 09:29:46PM +0800, Fam Zheng wrote:
> We need to handle the coming backing_blocker properly, so don't open
> code the assignment, instead, call bdrv_set_backing_hd to change
> backing_hd.
>
> Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
> ---
> block.c | 6 ++----
> block/stream.c | 4 ++--
> block/vvfat.c | 2 +-
> 3 files changed, 5 insertions(+), 7 deletions(-)
>
> diff --git a/block.c b/block.c
> index 911ba68..1271dd2 100644
> --- a/block.c
> +++ b/block.c
> @@ -2652,13 +2652,11 @@ int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
> if (ret) {
> goto exit;
> }
> - new_top_bs->backing_hd = base_bs;
> -
> - bdrv_refresh_limits(new_top_bs);
> + bdrv_set_backing_hd(new_top_bs, base_bs);
>
> QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
> /* so that bdrv_close() does not recursively close the chain */
> - intermediate_state->bs->backing_hd = NULL;
> + bdrv_set_backing_hd(intermediate_state->bs, NULL);
> bdrv_unref(intermediate_state->bs);
> }
> ret = 0;
> diff --git a/block/stream.c b/block/stream.c
> index dd0b4ac..91d18a2 100644
> --- a/block/stream.c
> +++ b/block/stream.c
> @@ -60,7 +60,7 @@ static void close_unused_images(BlockDriverState *top, BlockDriverState *base,
> /* Must assign before bdrv_delete() to prevent traversing dangling pointer
> * while we delete backing image instances.
> */
> - top->backing_hd = base;
> + bdrv_set_backing_hd(top, base);
>
> while (intermediate) {
> BlockDriverState *unused;
> @@ -72,7 +72,7 @@ static void close_unused_images(BlockDriverState *top, BlockDriverState *base,
>
> unused = intermediate;
> intermediate = intermediate->backing_hd;
> - unused->backing_hd = NULL;
> + bdrv_set_backing_hd(unused, NULL);
> bdrv_unref(unused);
> }
>
> diff --git a/block/vvfat.c b/block/vvfat.c
> index c3af7ff..417e96f 100644
> --- a/block/vvfat.c
> +++ b/block/vvfat.c
> @@ -2947,7 +2947,7 @@ static int enable_write_target(BDRVVVFATState *s)
> unlink(s->qcow_filename);
> #endif
>
> - s->bs->backing_hd = bdrv_new("", &error_abort);
> + bdrv_set_backing_hd(s->bs, bdrv_new("", &error_abort));
> s->bs->backing_hd->drv = &vvfat_write_target;
> s->bs->backing_hd->opaque = g_malloc(sizeof(void*));
> *(void**)s->bs->backing_hd->opaque = s;
> --
> 1.9.2
>
next prev parent reply other threads:[~2014-05-23 14:31 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-23 13:29 [Qemu-devel] [PATCH v2 0/8] block: Drop in_use with op blocker Fam Zheng
2014-05-23 13:29 ` [Qemu-devel] [PATCH v2 1/8] block: Add BlockOpType enum Fam Zheng
2014-05-23 13:29 ` [Qemu-devel] [PATCH v2 2/8] block: Introduce op_blockers to BlockDriverState Fam Zheng
2014-05-23 13:29 ` [Qemu-devel] [PATCH v2 3/8] block: Replace in_use with operation blocker Fam Zheng
2014-05-23 13:29 ` [Qemu-devel] [PATCH v2 4/8] block: Move op_blocker check from block_job_create to its caller Fam Zheng
2014-05-23 13:29 ` [Qemu-devel] [PATCH v2 5/8] block: Add bdrv_set_backing_hd() Fam Zheng
2014-05-23 13:29 ` [Qemu-devel] [PATCH v2 6/8] block: Use bdrv_set_backing_hd everywhere Fam Zheng
2014-05-23 14:31 ` Jeff Cody [this message]
2014-05-23 13:29 ` [Qemu-devel] [PATCH v2 7/8] block: Add backing_blocker in BlockDriverState Fam Zheng
2014-05-23 13:29 ` [Qemu-devel] [PATCH v2 8/8] block: Drop redundant bdrv_refresh_limits Fam Zheng
2014-05-23 14:36 ` Jeff Cody
2014-05-23 15:18 ` [Qemu-devel] [PATCH v2 0/8] block: Drop in_use with op blocker Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140523143128.GA5795@localhost.localdomain \
--to=jcody@redhat.com \
--cc=benoit@irqsave.net \
--cc=famz@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).