[Qemu-devel] [PATCH 0/4] standalone libcacard

[Qemu-devel] [PATCH 0/4] standalone libcacard

[Paolo Bonzini]

This series picks up Michael Tokarev's patches, avoiding the
nasty type redefinition for GMutex/GCond and also sticking to
the same API as glib 2.32+ (apart from the type name).

Keeping the same function names makes usage simpler, and is
type safe.

We could in principle drop QemuThread now that the API is the
same.  However:

- glib 2.32 also dropped custom thread implementations, which
  we may want sooner or later to use priority inheritance

- the POSIX implementation of GMutex is particularly inefficient
  (it is basically the same that we're doing here with GOnce) and uses
  malloc to get a pthread_mutex_t, with a little extra cost on each lock
  and unlock for the test and the pointer-chase.  It would be nicer if
  glib at least provided a futex-based implementation on Linux.

Comments?

Paolo

Michael Tokarev (4):
  glib-compat.h: add new thread API emulation on top of pre-2.31 API
  vscclient: use glib thread primitives not qemu
  libcacard: replace qemu thread primitives with glib ones
  libcacard: actually use symbols file

 coroutine-gthread.c   |   29 +++---------
 include/glib-compat.h |  119 +++++++++++++++++++++++++++++++++++++++++++++++++
 libcacard/Makefile    |   10 +---
 libcacard/event.c     |   23 ++++-----
 libcacard/vreader.c   |   18 +++----
 libcacard/vscclient.c |   70 +++++++++++++++--------------
 trace/simple.c        |   50 +++++----------------
 7 files changed, 195 insertions(+), 124 deletions(-)

[Qemu-devel] [PATCH 1/4] glib-compat.h: add new thread API emulation on top of pre-2.31 API

[Paolo Bonzini]

From: Michael Tokarev <mjt@tls.msk.ru>

Thread API changed in glib-2.31 significantly.  Before that version,
conditionals and mutexes were only allocated dynamically, using
_new()/_free() interface.  in 2.31 and up, they're allocated statically
as regular variables, and old interface is deprecated.

(Note: glib docs says the new interface is available since version
2.32, but it was actually introduced in version 2.31).

Create the new interface using old primitives, by providing non-opaque
definitions of the base types (GCond and GMutex) using GOnces.

Replace #ifdeffery around GCond and GMutex in trace/simple.c and
coroutine-gthread.c too because it does not work anymore with the new
glib-compat.h.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Alon Levy <alevy@redhat.com>
Tested-by: Alon Levy <alevy@redhat.com>
[Use GOnce to support lazy initialization; introduce CompatGMutex
 and CompatGCond.  - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 coroutine-gthread.c   |   29 +++---------
 include/glib-compat.h |  119 +++++++++++++++++++++++++++++++++++++++++++++++++
 trace/simple.c        |   50 +++++----------------
 3 files changed, 138 insertions(+), 60 deletions(-)

diff --git a/coroutine-gthread.c b/coroutine-gthread.c
index a61efe0..6bd6d6b 100644
--- a/coroutine-gthread.c
+++ b/coroutine-gthread.c
@@ -30,20 +30,14 @@ typedef struct {
     CoroutineAction action;
 } CoroutineGThread;
 
-static GStaticMutex coroutine_lock = G_STATIC_MUTEX_INIT;
+static CompatGMutex coroutine_lock;
+static CompatGCond coroutine_cond;
 
 /* GLib 2.31 and beyond deprecated various parts of the thread API,
  * but the new interfaces are not available in older GLib versions
  * so we have to cope with both.
  */
 #if GLIB_CHECK_VERSION(2, 31, 0)
-/* Default zero-initialisation is sufficient for 2.31+ GCond */
-static GCond the_coroutine_cond;
-static GCond *coroutine_cond = &the_coroutine_cond;
-static inline void init_coroutine_cond(void)
-{
-}
-
 /* Awkwardly, the GPrivate API doesn't provide a way to update the
  * GDestroyNotify handler for the coroutine key dynamically. So instead
  * we track whether or not the CoroutineGThread should be freed on
@@ -84,11 +78,6 @@ static inline GThread *create_thread(GThreadFunc func, gpointer data)
 #else
 
 /* Handle older GLib versions */
-static GCond *coroutine_cond;
-static inline void init_coroutine_cond(void)
-{
-    coroutine_cond = g_cond_new();
-}
 
 static GStaticPrivate coroutine_key = G_STATIC_PRIVATE_INIT;
 
@@ -120,22 +109,20 @@ static void __attribute__((constructor)) coroutine_init(void)
         g_thread_init(NULL);
     }
 #endif
-
-    init_coroutine_cond();
 }
 
 static void coroutine_wait_runnable_locked(CoroutineGThread *co)
 {
     while (!co->runnable) {
-        g_cond_wait(coroutine_cond, g_static_mutex_get_mutex(&coroutine_lock));
+        g_cond_wait(&coroutine_cond, &coroutine_lock);
     }
 }
 
 static void coroutine_wait_runnable(CoroutineGThread *co)
 {
-    g_static_mutex_lock(&coroutine_lock);
+    g_mutex_lock(&coroutine_lock);
     coroutine_wait_runnable_locked(co);
-    g_static_mutex_unlock(&coroutine_lock);
+    g_mutex_unlock(&coroutine_lock);
 }
 
 static gpointer coroutine_thread(gpointer opaque)
@@ -177,17 +164,17 @@ CoroutineAction qemu_coroutine_switch(Coroutine *from_,
     CoroutineGThread *from = DO_UPCAST(CoroutineGThread, base, from_);
     CoroutineGThread *to = DO_UPCAST(CoroutineGThread, base, to_);
 
-    g_static_mutex_lock(&coroutine_lock);
+    g_mutex_lock(&coroutine_lock);
     from->runnable = false;
     from->action = action;
     to->runnable = true;
     to->action = action;
-    g_cond_broadcast(coroutine_cond);
+    g_cond_broadcast(&coroutine_cond);
 
     if (action != COROUTINE_TERMINATE) {
         coroutine_wait_runnable_locked(from);
     }
-    g_static_mutex_unlock(&coroutine_lock);
+    g_mutex_unlock(&coroutine_lock);
     return from->action;
 }
 
diff --git a/include/glib-compat.h b/include/glib-compat.h
index 1280fb2..f3d22ac 100644
--- a/include/glib-compat.h
+++ b/include/glib-compat.h
@@ -5,6 +5,8 @@
  *
  * Authors:
  *  Anthony Liguori   <aliguori@us.ibm.com>
+ *  Michael Tokarev   <mjt@tls.msk.ru>
+ *  Paolo Bonzini     <pbonzini@redhat.com>
  *
  * This work is licensed under the terms of the GNU GPL, version 2 or later.
  * See the COPYING file in the top-level directory.
@@ -43,4 +45,121 @@ static inline gint g_poll(GPollFD *fds, guint nfds, gint timeout)
 }
 #endif
 
+#if !GLIB_CHECK_VERSION(2, 31, 0)
+/* before glib-2.31, GMutex and GCond was dynamic-only (there was a separate
+ * GStaticMutex, but it didn't work with condition variables).
+ *
+ * Our implementation uses GOnce to fake a static implementation that does
+ * not require separate initialization.
+ * We need to rename the types to avoid passing our CompatGMutex/CompatGCond
+ * by mistake to a function that expects GMutex/GCond.  However, for ease
+ * of use we keep the GLib function names.  GLib uses macros for the
+ * implementation, we use inline functions instead and undefine the macros.
+ */
+
+typedef struct CompatGMutex {
+    GOnce once;
+} CompatGMutex;
+
+typedef struct CompatGCond {
+    GOnce once;
+} CompatGCond;
+
+static inline gpointer do_g_mutex_new(gpointer unused)
+{
+    return (gpointer) g_mutex_new();
+}
+
+static inline void g_mutex_init(CompatGMutex *mutex)
+{
+    mutex->once = (GOnce) G_ONCE_INIT;
+}
+
+static inline void g_mutex_clear(CompatGMutex *mutex)
+{
+    assert(mutex->once.status != G_ONCE_STATUS_PROGRESS);
+    if (mutex->once.retval) {
+        g_mutex_free((GMutex *) mutex->once.retval);
+    }
+    mutex->once = (GOnce) G_ONCE_INIT;
+}
+
+static inline void (g_mutex_lock)(CompatGMutex *mutex)
+{
+    g_once(&mutex->once, do_g_mutex_new, NULL);
+    g_mutex_lock((GMutex *) mutex->once.retval);
+}
+#undef g_mutex_lock
+
+static inline gboolean (g_mutex_trylock)(CompatGMutex *mutex)
+{
+    g_once(&mutex->once, do_g_mutex_new, NULL);
+    return g_mutex_trylock((GMutex *) mutex->once.retval);
+}
+#undef g_mutex_trylock
+
+
+static inline void (g_mutex_unlock)(CompatGMutex *mutex)
+{
+    g_mutex_unlock((GMutex *) mutex->once.retval);
+}
+#undef g_mutex_unlock
+
+static inline gpointer do_g_cond_new(gpointer unused)
+{
+    return (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) g_cond_new();
+}
+
+static inline void g_cond_init(CompatGCond *cond)
+{
+    cond->once = (GOnce) G_ONCE_INIT;
+}
+
+static inline void g_cond_clear(CompatGCond *cond)
+{
+    assert(cond->once.status != G_ONCE_STATUS_PROGRESS);
+    if (cond->once.retval) {
+        g_cond_free((GCond *) cond->once.retval);
+    }
+    cond->once = (GOnce) G_ONCE_INIT;
+}
+
+static inline void (g_cond_wait)(CompatGCond *cond, CompatGMutex *mutex)
+{
+    assert(mutex->once.status != G_ONCE_STATUS_PROGRESS);
+    g_once(&cond->once, do_g_cond_new, NULL);
+    g_cond_wait((GCond *) cond->once.retval, (GMutex *) mutex->once.retval);
+}
+#undef g_cond_wait
+
+static inline void (g_cond_broadcast)(CompatGCond *cond)
+{
+    g_once(&cond->once, do_g_cond_new, NULL);
+    g_cond_broadcast((GCond *) cond->once.retval);
+}
+#undef g_cond_broadcast
+
+static inline void (g_cond_signal)(CompatGCond *cond)
+{
+    g_once(&cond->once, do_g_cond_new, NULL);
+    g_cond_signal((GCond *) cond->once.retval);
+}
+#undef g_cond_signal
+
+
+/* before 2.31 there was no g_thread_new() */
+static inline GThread *g_thread_new(const char *name,
+                                    GThreadFunc func, gpointer data)
+{
+    GThread *thread = g_thread_create(func, data, TRUE, NULL);
+    if (!thread) {
+        g_error("creating thread");
+    }
+    return thread;
+}
+#else
+#define CompatGMutex GMutex
+#define CompatGCond GCond
+#endif /* glib 2.31 */
+
 #endif
diff --git a/trace/simple.c b/trace/simple.c
index bb0b52c..085a86c 100644
--- a/trace/simple.c
+++ b/trace/simple.c
@@ -40,28 +40,9 @@
  * Trace records are written out by a dedicated thread.  The thread waits for
  * records to become available, writes them out, and then waits again.
  */
-#if GLIB_CHECK_VERSION(2, 32, 0)
-static GMutex trace_lock;
-#define lock_trace_lock() g_mutex_lock(&trace_lock)
-#define unlock_trace_lock() g_mutex_unlock(&trace_lock)
-#define get_trace_lock_mutex() (&trace_lock)
-#else
-static GStaticMutex trace_lock = G_STATIC_MUTEX_INIT;
-#define lock_trace_lock() g_static_mutex_lock(&trace_lock)
-#define unlock_trace_lock() g_static_mutex_unlock(&trace_lock)
-#define get_trace_lock_mutex() g_static_mutex_get_mutex(&trace_lock)
-#endif
-
-/* g_cond_new() was deprecated in glib 2.31 but we still need to support it */
-#if GLIB_CHECK_VERSION(2, 31, 0)
-static GCond the_trace_available_cond;
-static GCond the_trace_empty_cond;
-static GCond *trace_available_cond = &the_trace_available_cond;
-static GCond *trace_empty_cond = &the_trace_empty_cond;
-#else
-static GCond *trace_available_cond;
-static GCond *trace_empty_cond;
-#endif
+static CompatGMutex trace_lock;
+static CompatGCond trace_available_cond;
+static CompatGCond trace_empty_cond;
 
 static bool trace_available;
 static bool trace_writeout_enabled;
@@ -150,26 +131,26 @@ static bool get_trace_record(unsigned int idx, TraceRecord **recordptr)
  */
 static void flush_trace_file(bool wait)
 {
-    lock_trace_lock();
+    g_mutex_lock(&trace_lock);
     trace_available = true;
-    g_cond_signal(trace_available_cond);
+    g_cond_signal(&trace_available_cond);
 
     if (wait) {
-        g_cond_wait(trace_empty_cond, get_trace_lock_mutex());
+        g_cond_wait(&trace_empty_cond, &trace_lock);
     }
 
-    unlock_trace_lock();
+    g_mutex_unlock(&trace_lock);
 }
 
 static void wait_for_trace_records_available(void)
 {
-    lock_trace_lock();
+    g_mutex_lock(&trace_lock);
     while (!(trace_available && trace_writeout_enabled)) {
-        g_cond_signal(trace_empty_cond);
-        g_cond_wait(trace_available_cond, get_trace_lock_mutex());
+        g_cond_signal(&trace_empty_cond);
+        g_cond_wait(&trace_available_cond, &trace_lock);
     }
     trace_available = false;
-    unlock_trace_lock();
+    g_mutex_unlock(&trace_lock);
 }
 
 static gpointer writeout_thread(gpointer opaque)
@@ -397,11 +378,7 @@ static GThread *trace_thread_create(GThreadFunc fn)
     pthread_sigmask(SIG_SETMASK, &set, &oldset);
 #endif
 
-#if GLIB_CHECK_VERSION(2, 31, 0)
     thread = g_thread_new("trace-thread", fn, NULL);
-#else
-    thread = g_thread_create(fn, NULL, FALSE, NULL);
-#endif
 
 #ifndef _WIN32
     pthread_sigmask(SIG_SETMASK, &oldset, NULL);
@@ -414,11 +391,6 @@ bool trace_backend_init(const char *events, const char *file)
 {
     GThread *thread;
 
-#if !GLIB_CHECK_VERSION(2, 31, 0)
-    trace_available_cond = g_cond_new();
-    trace_empty_cond = g_cond_new();
-#endif
-
     thread = trace_thread_create(writeout_thread);
     if (!thread) {
         fprintf(stderr, "warning: unable to initialize simple trace backend\n");
-- 
1.7.1

[Qemu-devel] [PATCH 2/4] vscclient: use glib thread primitives not qemu

[Paolo Bonzini]

From: Michael Tokarev <mjt@tls.msk.ru>

Use glib-provided thread primitives in vscclient instead of
qemu ones, and do not use qemu sockets in there (open-code
call to WSAStartup() for windows to initialize things).

This way, vscclient becomes more stand-alone, independent on
qemu internals.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Alon Levy <alevy@redhat.com>
Tested-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 libcacard/vscclient.c |   70 ++++++++++++++++++++++++++-----------------------
 1 files changed, 37 insertions(+), 33 deletions(-)

diff --git a/libcacard/vscclient.c b/libcacard/vscclient.c
index 3477ab3..598206b 100644
--- a/libcacard/vscclient.c
+++ b/libcacard/vscclient.c
@@ -12,12 +12,10 @@
 
 #ifndef _WIN32
 #include <netdb.h>
+#define closesocket(x) close(x)
 #endif
-#include <glib.h>
 
 #include "qemu-common.h"
-#include "qemu/thread.h"
-#include "qemu/sockets.h"
 
 #include "vscard_common.h"
 
@@ -54,7 +52,7 @@ print_usage(void) {
 
 static GIOChannel *channel_socket;
 static GByteArray *socket_to_send;
-static QemuMutex socket_to_send_lock;
+static CompatGMutex socket_to_send_lock;
 static guint socket_tag;
 
 static void
@@ -103,7 +101,7 @@ send_msg(
 ) {
     VSCMsgHeader mhHeader;
 
-    qemu_mutex_lock(&socket_to_send_lock);
+    g_mutex_lock(&socket_to_send_lock);
 
     if (verbose > 10) {
         printf("sending type=%d id=%u, len =%u (0x%x)\n",
@@ -117,18 +115,18 @@ send_msg(
     g_byte_array_append(socket_to_send, (guint8 *)msg, length);
     g_idle_add(socket_prepare_sending, NULL);
 
-    qemu_mutex_unlock(&socket_to_send_lock);
+    g_mutex_unlock(&socket_to_send_lock);
 
     return 0;
 }
 
 static VReader *pending_reader;
-static QemuMutex pending_reader_lock;
-static QemuCond pending_reader_condition;
+static CompatGMutex pending_reader_lock;
+static CompatGCond pending_reader_condition;
 
 #define MAX_ATR_LEN 40
-static void *
-event_thread(void *arg)
+static gpointer
+event_thread(gpointer arg)
 {
     unsigned char atr[MAX_ATR_LEN];
     int atr_len = MAX_ATR_LEN;
@@ -149,20 +147,20 @@ event_thread(void *arg)
             /* ignore events from readers qemu has rejected */
             /* if qemu is still deciding on this reader, wait to see if need to
              * forward this event */
-            qemu_mutex_lock(&pending_reader_lock);
+            g_mutex_lock(&pending_reader_lock);
             if (!pending_reader || (pending_reader != event->reader)) {
                 /* wasn't for a pending reader, this reader has already been
                  * rejected by qemu */
-                qemu_mutex_unlock(&pending_reader_lock);
+                g_mutex_unlock(&pending_reader_lock);
                 vevent_delete(event);
                 continue;
             }
             /* this reader hasn't been told its status from qemu yet, wait for
              * that status */
             while (pending_reader != NULL) {
-                qemu_cond_wait(&pending_reader_condition, &pending_reader_lock);
+                g_cond_wait(&pending_reader_condition, &pending_reader_lock);
             }
-            qemu_mutex_unlock(&pending_reader_lock);
+            g_mutex_unlock(&pending_reader_lock);
             /* now recheck the id */
             reader_id = vreader_get_id(event->reader);
             if (reader_id == VSCARD_UNDEFINED_READER_ID) {
@@ -178,12 +176,12 @@ event_thread(void *arg)
             /* wait until qemu has responded to our first reader insert
              * before we send a second. That way we won't confuse the responses
              * */
-            qemu_mutex_lock(&pending_reader_lock);
+            g_mutex_lock(&pending_reader_lock);
             while (pending_reader != NULL) {
-                qemu_cond_wait(&pending_reader_condition, &pending_reader_lock);
+                g_cond_wait(&pending_reader_condition, &pending_reader_lock);
             }
             pending_reader = vreader_reference(event->reader);
-            qemu_mutex_unlock(&pending_reader_lock);
+            g_mutex_unlock(&pending_reader_lock);
             reader_name = vreader_get_name(event->reader);
             if (verbose > 10) {
                 printf(" READER INSERT: %s\n", reader_name);
@@ -246,7 +244,6 @@ on_host_init(VSCMsgHeader *mhHeader, VSCMsgInit *incoming)
     int num_capabilities =
         1 + ((mhHeader->length - sizeof(VSCMsgInit)) / sizeof(uint32_t));
     int i;
-    QemuThread thread_id;
 
     incoming->version = ntohl(incoming->version);
     if (incoming->version != VSCARD_VERSION) {
@@ -269,7 +266,7 @@ on_host_init(VSCMsgHeader *mhHeader, VSCMsgInit *incoming)
     send_msg(VSC_ReaderRemove, VSCARD_MINIMAL_READER_ID, NULL, 0);
     /* launch the event_thread. This will trigger reader adds for all the
      * existing readers */
-    qemu_thread_create(&thread_id, "vsc/event", event_thread, NULL, 0);
+    g_thread_new("vsc/event", event_thread, NULL);
     return 0;
 }
 
@@ -379,26 +376,26 @@ do_socket_read(GIOChannel *source,
         case VSC_Error:
             error_msg = (VSCMsgError *) pbSendBuffer;
             if (error_msg->code == VSC_SUCCESS) {
-                qemu_mutex_lock(&pending_reader_lock);
+                g_mutex_lock(&pending_reader_lock);
                 if (pending_reader) {
                     vreader_set_id(pending_reader, mhHeader.reader_id);
                     vreader_free(pending_reader);
                     pending_reader = NULL;
-                    qemu_cond_signal(&pending_reader_condition);
+                    g_cond_signal(&pending_reader_condition);
                 }
-                qemu_mutex_unlock(&pending_reader_lock);
+                g_mutex_unlock(&pending_reader_lock);
                 break;
             }
             printf("warning: qemu refused to add reader\n");
             if (error_msg->code == VSC_CANNOT_ADD_MORE_READERS) {
                 /* clear pending reader, qemu can't handle any more */
-                qemu_mutex_lock(&pending_reader_lock);
+                g_mutex_lock(&pending_reader_lock);
                 if (pending_reader) {
                     pending_reader = NULL;
                     /* make sure the event loop doesn't hang */
-                    qemu_cond_signal(&pending_reader_condition);
+                    g_cond_signal(&pending_reader_condition);
                 }
-                qemu_mutex_unlock(&pending_reader_lock);
+                g_mutex_unlock(&pending_reader_lock);
             }
             break;
         case VSC_Init:
@@ -602,7 +599,7 @@ connect_to_qemu(
     struct addrinfo *server;
     int ret, sock;
 
-    sock = qemu_socket(AF_INET, SOCK_STREAM, 0);
+    sock = socket(AF_INET, SOCK_STREAM, 0);
     if (sock < 0) {
         /* Error */
         fprintf(stderr, "Error opening socket!\n");
@@ -655,8 +652,20 @@ main(
     int cert_count = 0;
     int c, sock;
 
-    if (socket_init() != 0)
+#ifdef _WIN32
+    WSADATA Data;
+
+    if (WSAStartup(MAKEWORD(2, 2), &Data) != 0) {
+        c = WSAGetLastError();
+        fprintf(stderr, "WSAStartup: %d\n", c);
         return 1;
+    }
+#endif
+#if !GLIB_CHECK_VERSION(2, 31, 0)
+    if (!g_thread_supported()) {
+         g_thread_init(NULL);
+    }
+#endif
 
     while ((c = getopt(argc, argv, "c:e:pd:")) != -1) {
         switch (c) {
@@ -723,13 +732,8 @@ main(
     }
 
     socket_to_send = g_byte_array_new();
-    qemu_mutex_init(&socket_to_send_lock);
-    qemu_mutex_init(&pending_reader_lock);
-    qemu_cond_init(&pending_reader_condition);
-
     vcard_emul_init(command_line_options);
-
-    loop = g_main_loop_new(NULL, true);
+    loop = g_main_loop_new(NULL, TRUE);
 
     printf("> ");
     fflush(stdout);
-- 
1.7.1

[Qemu-devel] [PATCH 3/4] libcacard: replace qemu thread primitives with glib ones

[Paolo Bonzini]

From: Michael Tokarev <mjt@tls.msk.ru>

Replace QemuMutex with GMutex and QemuCond with GCond
(with corresponding function changes), to make libcacard
independent of qemu internal functions.

After this step, none of libcacard internals use any
qemu-provided symbols.  Maybe it's a good idea to
stop including qemu-common.h internally too.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Alon Levy <alevy@redhat.com>
Tested-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 libcacard/Makefile  |    8 +-------
 libcacard/event.c   |   23 ++++++++++-------------
 libcacard/vreader.c |   18 ++++++++----------
 3 files changed, 19 insertions(+), 30 deletions(-)

diff --git a/libcacard/Makefile b/libcacard/Makefile
index 881b222..92d3b47 100644
--- a/libcacard/Makefile
+++ b/libcacard/Makefile
@@ -3,13 +3,7 @@ libcacard_includedir=$(includedir)/cacard
 TOOLS += vscclient$(EXESUF)
 
 # objects linked into a shared library, built with libtool with -fPIC if required
-libcacard-obj-y = $(stub-obj-y) $(libcacard-y)
-libcacard-obj-y += util/osdep.o util/cutils.o util/qemu-timer-common.o
-libcacard-obj-y += util/error.o util/qemu-error.o
-libcacard-obj-$(CONFIG_WIN32) += util/oslib-win32.o util/qemu-thread-win32.o
-libcacard-obj-$(CONFIG_POSIX) += util/oslib-posix.o util/qemu-thread-posix.o
-libcacard-obj-y += $(filter trace/%, $(util-obj-y))
-
+libcacard-obj-y = $(libcacard-y)
 libcacard-lobj-y=$(patsubst %.o,%.lo,$(libcacard-obj-y))
 
 # libtool will build the .o files, too
diff --git a/libcacard/event.c b/libcacard/event.c
index 2d7500f..2074de1 100644
--- a/libcacard/event.c
+++ b/libcacard/event.c
@@ -6,7 +6,6 @@
  */
 
 #include "qemu-common.h"
-#include "qemu/thread.h"
 
 #include "vcard.h"
 #include "vreader.h"
@@ -43,13 +42,11 @@ vevent_delete(VEvent *vevent)
 
 static VEvent *vevent_queue_head;
 static VEvent *vevent_queue_tail;
-static QemuMutex vevent_queue_lock;
-static QemuCond vevent_queue_condition;
+static CompatGMutex vevent_queue_lock;
+static CompatGCond vevent_queue_condition;
 
 void vevent_queue_init(void)
 {
-    qemu_mutex_init(&vevent_queue_lock);
-    qemu_cond_init(&vevent_queue_condition);
     vevent_queue_head = vevent_queue_tail = NULL;
 }
 
@@ -57,7 +54,7 @@ void
 vevent_queue_vevent(VEvent *vevent)
 {
     vevent->next = NULL;
-    qemu_mutex_lock(&vevent_queue_lock);
+    g_mutex_lock(&vevent_queue_lock);
     if (vevent_queue_head) {
         assert(vevent_queue_tail);
         vevent_queue_tail->next = vevent;
@@ -65,8 +62,8 @@ vevent_queue_vevent(VEvent *vevent)
         vevent_queue_head = vevent;
     }
     vevent_queue_tail = vevent;
-    qemu_cond_signal(&vevent_queue_condition);
-    qemu_mutex_unlock(&vevent_queue_lock);
+    g_cond_signal(&vevent_queue_condition);
+    g_mutex_unlock(&vevent_queue_lock);
 }
 
 /* must have lock */
@@ -86,11 +83,11 @@ VEvent *vevent_wait_next_vevent(void)
 {
     VEvent *vevent;
 
-    qemu_mutex_lock(&vevent_queue_lock);
+    g_mutex_lock(&vevent_queue_lock);
     while ((vevent = vevent_dequeue_vevent()) == NULL) {
-        qemu_cond_wait(&vevent_queue_condition, &vevent_queue_lock);
+        g_cond_wait(&vevent_queue_condition, &vevent_queue_lock);
     }
-    qemu_mutex_unlock(&vevent_queue_lock);
+    g_mutex_unlock(&vevent_queue_lock);
     return vevent;
 }
 
@@ -98,9 +95,9 @@ VEvent *vevent_get_next_vevent(void)
 {
     VEvent *vevent;
 
-    qemu_mutex_lock(&vevent_queue_lock);
+    g_mutex_lock(&vevent_queue_lock);
     vevent = vevent_dequeue_vevent();
-    qemu_mutex_unlock(&vevent_queue_lock);
+    g_mutex_unlock(&vevent_queue_lock);
     return vevent;
 }
 
diff --git a/libcacard/vreader.c b/libcacard/vreader.c
index 7720295..da0d99a 100644
--- a/libcacard/vreader.c
+++ b/libcacard/vreader.c
@@ -9,10 +9,8 @@
 #undef G_LOG_DOMAIN
 #endif
 #define G_LOG_DOMAIN "libcacard"
-#include <glib.h>
 
 #include "qemu-common.h"
-#include "qemu/thread.h"
 
 #include "vcard.h"
 #include "vcard_emul.h"
@@ -28,7 +26,7 @@ struct VReaderStruct {
     VCard *card;
     char *name;
     vreader_id_t id;
-    QemuMutex lock;
+    CompatGMutex lock;
     VReaderEmul  *reader_private;
     VReaderEmulFree reader_private_free;
 };
@@ -97,13 +95,13 @@ apdu_ins_to_string(int ins)
 static inline void
 vreader_lock(VReader *reader)
 {
-    qemu_mutex_lock(&reader->lock);
+    g_mutex_lock(&reader->lock);
 }
 
 static inline void
 vreader_unlock(VReader *reader)
 {
-    qemu_mutex_unlock(&reader->lock);
+    g_mutex_unlock(&reader->lock);
 }
 
 /*
@@ -116,7 +114,7 @@ vreader_new(const char *name, VReaderEmul *private,
     VReader *reader;
 
     reader = (VReader *)g_malloc(sizeof(VReader));
-    qemu_mutex_init(&reader->lock);
+    g_mutex_init(&reader->lock);
     reader->reference_count = 1;
     reader->name = g_strdup(name);
     reader->card = NULL;
@@ -152,6 +150,7 @@ vreader_free(VReader *reader)
         return;
     }
     vreader_unlock(reader);
+    g_mutex_clear(&reader->lock);
     if (reader->card) {
         vcard_free(reader->card);
     }
@@ -413,25 +412,24 @@ vreader_dequeue(VReaderList *list, VReaderListEntry *entry)
 }
 
 static VReaderList *vreader_list;
-static QemuMutex vreader_list_mutex;
+static CompatGMutex vreader_list_mutex;
 
 static void
 vreader_list_init(void)
 {
     vreader_list = vreader_list_new();
-    qemu_mutex_init(&vreader_list_mutex);
 }
 
 static void
 vreader_list_lock(void)
 {
-    qemu_mutex_lock(&vreader_list_mutex);
+    g_mutex_lock(&vreader_list_mutex);
 }
 
 static void
 vreader_list_unlock(void)
 {
-    qemu_mutex_unlock(&vreader_list_mutex);
+    g_mutex_unlock(&vreader_list_mutex);
 }
 
 static VReaderList *
-- 
1.7.1

[Qemu-devel] [PATCH 4/4] libcacard: actually use symbols file

[Paolo Bonzini]

From: Michael Tokarev <mjt@tls.msk.ru>

libtool has an argument for .syms file, which is -export-symbols.
There's no argument `-export-syms', and it looks like at least on
linux, -export-syms is just ignored.  Use the correct argument,
-export-symbols, to actually get the right export list.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Alon Levy <alevy@redhat.com>
Tested-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 libcacard/Makefile |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/libcacard/Makefile b/libcacard/Makefile
index 92d3b47..0e7903f 100644
--- a/libcacard/Makefile
+++ b/libcacard/Makefile
@@ -18,7 +18,7 @@ vscclient$(EXESUF): libcacard/vscclient.o libcacard.la
 # Rules for building libcacard standalone library
 
 libcacard.la: LDFLAGS += -rpath $(libdir) -no-undefined \
-	-export-syms $(SRC_PATH)/libcacard/libcacard.syms
+	-export-symbols $(SRC_PATH)/libcacard/libcacard.syms
 libcacard.la: $(libcacard-lobj-y)
 	$(call LINK,$^)
 
-- 
1.7.1

Re: [Qemu-devel] [PATCH 1/4] glib-compat.h: add new thread API emulation on top of pre-2.31 API

[Stefan Hajnoczi]

On Fri, May 23, 2014 at 01:44:54PM +0200, Paolo Bonzini wrote:
> +static inline gpointer do_g_cond_new(gpointer unused)
> +{
> +    return (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) g_cond_new();

what what what what what what what what what what what?

Re: [Qemu-devel] [PATCH 1/4] glib-compat.h: add new thread API emulation on top of pre-2.31 API

[Paolo Bonzini]

Il 23/05/2014 17:03, Stefan Hajnoczi ha scritto:
> On Fri, May 23, 2014 at 01:44:54PM +0200, Paolo Bonzini wrote:
>> +static inline gpointer do_g_cond_new(gpointer unused)
>> +{
>> +    return (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) g_cond_new();
>
> what what what what what what what what what what what?

I guess I fat-fingered an "i" into "9i"...

Is this the only complaint? :)

Paolo

Re: [Qemu-devel] [PATCH 1/4] glib-compat.h: add new thread API emulation on top of pre-2.31 API

[Stefan Hajnoczi]

On Fri, May 23, 2014 at 05:13:52PM +0200, Paolo Bonzini wrote:
> Il 23/05/2014 17:03, Stefan Hajnoczi ha scritto:
> >On Fri, May 23, 2014 at 01:44:54PM +0200, Paolo Bonzini wrote:
> >>+static inline gpointer do_g_cond_new(gpointer unused)
> >>+{
> >>+    return (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) (gpointer) g_cond_new();
> >
> >what what what what what what what what what what what?
> 
> I guess I fat-fingered an "i" into "9i"...
> 
> Is this the only complaint? :)

I need to review it properly on Monday.

Stefan

Re: [Qemu-devel] [PATCH 1/4] glib-compat.h: add new thread API emulation on top of pre-2.31 API

[Stefan Hajnoczi]

On Fri, May 23, 2014 at 01:44:54PM +0200, Paolo Bonzini wrote:
> From: Michael Tokarev <mjt@tls.msk.ru>
> 
> Thread API changed in glib-2.31 significantly.  Before that version,
> conditionals and mutexes were only allocated dynamically, using
> _new()/_free() interface.  in 2.31 and up, they're allocated statically
> as regular variables, and old interface is deprecated.
> 
> (Note: glib docs says the new interface is available since version
> 2.32, but it was actually introduced in version 2.31).
> 
> Create the new interface using old primitives, by providing non-opaque
> definitions of the base types (GCond and GMutex) using GOnces.
> 
> Replace #ifdeffery around GCond and GMutex in trace/simple.c and
> coroutine-gthread.c too because it does not work anymore with the new
> glib-compat.h.
> 
> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
> Reviewed-by: Alon Levy <alevy@redhat.com>
> Tested-by: Alon Levy <alevy@redhat.com>
> [Use GOnce to support lazy initialization; introduce CompatGMutex
>  and CompatGCond.  - Paolo]
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
>  coroutine-gthread.c   |   29 +++---------
>  include/glib-compat.h |  119 +++++++++++++++++++++++++++++++++++++++++++++++++
>  trace/simple.c        |   50 +++++----------------
>  3 files changed, 138 insertions(+), 60 deletions(-)

You clever devil :-)

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>