Re: [Qemu-devel] [Bug 1326986] [NEW] e1000 - no link detected by

["Gabriel L. Somlo" <gsomlo@gmail.com>]

Matthew Gamble <mgamble@mgamble.ca> wrote:
> I'm trying to get a VXWorks image running inside a qemu guest.  I have
> the machine running, however, the vxworks image only has support for the
> 82544EI device so I had to change the device ID in e1000.c to get the
> device even recognized so I'm not sure if this is a bug or an issue for
> the development list.
> 
> After changing e1000.c, the device is now seen by the guest OS, however, it never gets a link.  I've attached the e1000 debug logs in the hopes that someone can help me understand where to start looking into why this guest won't get a link.
> 
> I tested the updated e1000 driver with a debian live CD and the card
> works under it, so it doesn't appear that the issue is with the driver
> string change but rather something in the e1000 driver itself.
> 
> Here is the command I'm using to start QEMU:
> 
> /opt/qemu/bin/qemu-system-i386  -cpu coreduo -hda /root/vxworks_test -m
> 2048 -netdev tap,ifname=tap0,id=net0 -netdev tap,ifname=tap1,id=net1
> -device e1000,netdev=net0,mac=00:00:e8:01:02:03 -device
> e1000,netdev=net1,mac=00:00:e8:01:02:04 -boot c -curses -no-kvm -D
> /tmp/qemu.log 2>/tmp/e1000.log

Can you try this:

Add "-monitor stdio" to your qemu command line, and give an id to at
least one of your e1000 devices, like so:

"-device e1000,netdev=net0,mac=00:00:e8:01:02:03,id=eth0"

Then after the guest is finished booting (with no link on the e1000
interfaces), from the qemu monitor prompt issue these two commands:

set_link eth0 off
set_link eth0 on

I'd be curious to find out if this causes the guest to see a link
become available...

Thanks,
--Gabriel