* [Qemu-devel] [PATCH] hw/pci: reserve IO and mem for pci express downstream ports with no devices attached
@ 2014-06-19 13:52 Marcel Apfelbaum
2014-06-19 14:21 ` Michael S. Tsirkin
0 siblings, 1 reply; 4+ messages in thread
From: Marcel Apfelbaum @ 2014-06-19 13:52 UTC (permalink / raw)
To: seabios; +Cc: kevin, qemu-devel, mst
commit c6e298e1f12e0f4ca02b6da5e42919ae055f6830
hw/pci: reserve IO and mem for pci-2-pci bridges with no devices attached
introduced support for hot-plugging devices behind pci-2-pci bridges.
Extend hotplug support also for pci express downstream ports.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
---
src/fw/pciinit.c | 23 +++++++++++++++++++++--
src/hw/pci_regs.h | 2 ++
2 files changed, 23 insertions(+), 2 deletions(-)
diff --git a/src/fw/pciinit.c b/src/fw/pciinit.c
index 0ad548f..edb3fe9 100644
--- a/src/fw/pciinit.c
+++ b/src/fw/pciinit.c
@@ -636,6 +636,25 @@ pci_region_create_entry(struct pci_bus *bus, struct pci_device *dev,
return entry;
}
+static int pci_bus_hotplug_support(struct pci_bus *bus)
+{
+ u8 shpc_cap = pci_find_capability(bus->bus_dev, PCI_CAP_ID_SHPC);
+ u8 pcie_cap = pci_find_capability(bus->bus_dev, PCI_CAP_ID_EXP);
+ int downstream_port = 0;
+ int slot_implemented = 0;
+
+ if (pcie_cap) {
+ u16 pcie_flags = pci_config_readw(bus->bus_dev->bdf,
+ pcie_cap + PCI_EXP_FLAGS);
+ u16 port_type = ((pcie_flags & PCI_EXP_FLAGS_TYPE) >>
+ PCI_EXP_FLAGS_TYPE_SHIFT) & 0xf;
+ downstream_port = (port_type == PCI_EXP_TYPE_DOWNSTREAM) ||
+ (port_type == PCI_EXP_TYPE_ROOT_PORT);
+ slot_implemented = !!(pcie_flags & PCI_EXP_FLAGS_SLOT);
+ }
+ return shpc_cap || (downstream_port && slot_implemented);
+}
+
static int pci_bios_check_devices(struct pci_bus *busses)
{
dprintf(1, "PCI: check devices\n");
@@ -678,7 +697,7 @@ static int pci_bios_check_devices(struct pci_bus *busses)
continue;
struct pci_bus *parent = &busses[pci_bdf_to_bus(s->bus_dev->bdf)];
int type;
- u8 shpc_cap = pci_find_capability(s->bus_dev, PCI_CAP_ID_SHPC);
+ int hotplug_support = pci_bus_hotplug_support(s);
for (type = 0; type < PCI_REGION_TYPE_COUNT; type++) {
u64 align = (type == PCI_REGION_TYPE_IO) ?
PCI_BRIDGE_IO_MIN : PCI_BRIDGE_MEM_MIN;
@@ -687,7 +706,7 @@ static int pci_bios_check_devices(struct pci_bus *busses)
if (pci_region_align(&s->r[type]) > align)
align = pci_region_align(&s->r[type]);
u64 sum = pci_region_sum(&s->r[type]);
- if (!sum && shpc_cap)
+ if (!sum && hotplug_support)
sum = align; /* reserve min size for hot-plug */
u64 size = ALIGN(sum, align);
int is64 = pci_bios_bridge_region_is64(&s->r[type],
diff --git a/src/hw/pci_regs.h b/src/hw/pci_regs.h
index e5effd4..6a71569 100644
--- a/src/hw/pci_regs.h
+++ b/src/hw/pci_regs.h
@@ -426,6 +426,8 @@
#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */
#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */
+#define PCI_EXP_FLAGS_TYPE_SHIFT 4
+
/* Extended Capabilities (PCI-X 2.0 and Express) */
#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff)
#define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf)
--
1.8.3.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [Qemu-devel] [PATCH] hw/pci: reserve IO and mem for pci express downstream ports with no devices attached
2014-06-19 13:52 [Qemu-devel] [PATCH] hw/pci: reserve IO and mem for pci express downstream ports with no devices attached Marcel Apfelbaum
@ 2014-06-19 14:21 ` Michael S. Tsirkin
2014-06-19 14:31 ` Marcel Apfelbaum
0 siblings, 1 reply; 4+ messages in thread
From: Michael S. Tsirkin @ 2014-06-19 14:21 UTC (permalink / raw)
To: Marcel Apfelbaum; +Cc: kevin, seabios, qemu-devel
On Thu, Jun 19, 2014 at 04:52:17PM +0300, Marcel Apfelbaum wrote:
> commit c6e298e1f12e0f4ca02b6da5e42919ae055f6830
> hw/pci: reserve IO and mem for pci-2-pci bridges with no devices attached
>
> introduced support for hot-plugging devices behind pci-2-pci bridges.
> Extend hotplug support also for pci express downstream ports.
>
> Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
> ---
> src/fw/pciinit.c | 23 +++++++++++++++++++++--
> src/hw/pci_regs.h | 2 ++
> 2 files changed, 23 insertions(+), 2 deletions(-)
>
> diff --git a/src/fw/pciinit.c b/src/fw/pciinit.c
> index 0ad548f..edb3fe9 100644
> --- a/src/fw/pciinit.c
> +++ b/src/fw/pciinit.c
> @@ -636,6 +636,25 @@ pci_region_create_entry(struct pci_bus *bus, struct pci_device *dev,
> return entry;
> }
>
> +static int pci_bus_hotplug_support(struct pci_bus *bus)
> +{
> + u8 shpc_cap = pci_find_capability(bus->bus_dev, PCI_CAP_ID_SHPC);
> + u8 pcie_cap = pci_find_capability(bus->bus_dev, PCI_CAP_ID_EXP);
> + int downstream_port = 0;
> + int slot_implemented = 0;
> +
> + if (pcie_cap) {
> + u16 pcie_flags = pci_config_readw(bus->bus_dev->bdf,
> + pcie_cap + PCI_EXP_FLAGS);
> + u16 port_type = ((pcie_flags & PCI_EXP_FLAGS_TYPE) >>
> + PCI_EXP_FLAGS_TYPE_SHIFT) & 0xf;
0xf is not needed here: PCI_EXP_FLAGS_TYPE is enough.
Also should be u8.
> + downstream_port = (port_type == PCI_EXP_TYPE_DOWNSTREAM) ||
> + (port_type == PCI_EXP_TYPE_ROOT_PORT);
This is correct, the spec says:
Configuration Space, and other capabilities.
8 Slot Implemented – When Set, this bit indicates that the Link
HwInit associated with this Port is connected to a slot (as compared to
being connected to a system-integrated device or being
disabled).
This bit is valid for Downstream Ports. This bit is undefined for
Upstream Ports.
Maybe add a comment in case people will wonder.
> + slot_implemented = !!(pcie_flags & PCI_EXP_FLAGS_SLOT);
I would do
return downstream_port && slot_implemented;
here, avoid testing shpc for express devices.
Also allows moving downstream_port && slot_implemented here.
> + }
> + return shpc_cap || (downstream_port && slot_implemented);
> +}
> +
> static int pci_bios_check_devices(struct pci_bus *busses)
> {
> dprintf(1, "PCI: check devices\n");
> @@ -678,7 +697,7 @@ static int pci_bios_check_devices(struct pci_bus *busses)
> continue;
> struct pci_bus *parent = &busses[pci_bdf_to_bus(s->bus_dev->bdf)];
> int type;
> - u8 shpc_cap = pci_find_capability(s->bus_dev, PCI_CAP_ID_SHPC);
> + int hotplug_support = pci_bus_hotplug_support(s);
> for (type = 0; type < PCI_REGION_TYPE_COUNT; type++) {
> u64 align = (type == PCI_REGION_TYPE_IO) ?
> PCI_BRIDGE_IO_MIN : PCI_BRIDGE_MEM_MIN;
> @@ -687,7 +706,7 @@ static int pci_bios_check_devices(struct pci_bus *busses)
> if (pci_region_align(&s->r[type]) > align)
> align = pci_region_align(&s->r[type]);
> u64 sum = pci_region_sum(&s->r[type]);
> - if (!sum && shpc_cap)
> + if (!sum && hotplug_support)
> sum = align; /* reserve min size for hot-plug */
> u64 size = ALIGN(sum, align);
> int is64 = pci_bios_bridge_region_is64(&s->r[type],
> diff --git a/src/hw/pci_regs.h b/src/hw/pci_regs.h
> index e5effd4..6a71569 100644
> --- a/src/hw/pci_regs.h
> +++ b/src/hw/pci_regs.h
> @@ -426,6 +426,8 @@
> #define PCI_EXP_DEVCTL2 40 /* Device Control 2 */
> #define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */
>
> +#define PCI_EXP_FLAGS_TYPE_SHIFT 4
> +
It's generally not a good idea to randomly add macros
in random places.
In this case this is not needed. Just call __ffs on
PCI_EXP_FLAGS_TYPE.
> /* Extended Capabilities (PCI-X 2.0 and Express) */
> #define PCI_EXT_CAP_ID(header) (header & 0x0000ffff)
> #define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf)
> --
> 1.8.3.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Qemu-devel] [PATCH] hw/pci: reserve IO and mem for pci express downstream ports with no devices attached
2014-06-19 14:21 ` Michael S. Tsirkin
@ 2014-06-19 14:31 ` Marcel Apfelbaum
2014-06-19 14:50 ` Michael S. Tsirkin
0 siblings, 1 reply; 4+ messages in thread
From: Marcel Apfelbaum @ 2014-06-19 14:31 UTC (permalink / raw)
To: Michael S. Tsirkin; +Cc: kevin, seabios, qemu-devel
On Thu, 2014-06-19 at 17:21 +0300, Michael S. Tsirkin wrote:
> On Thu, Jun 19, 2014 at 04:52:17PM +0300, Marcel Apfelbaum wrote:
> > commit c6e298e1f12e0f4ca02b6da5e42919ae055f6830
> > hw/pci: reserve IO and mem for pci-2-pci bridges with no devices attached
> >
> > introduced support for hot-plugging devices behind pci-2-pci bridges.
> > Extend hotplug support also for pci express downstream ports.
> >
> > Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
> > ---
> > src/fw/pciinit.c | 23 +++++++++++++++++++++--
> > src/hw/pci_regs.h | 2 ++
> > 2 files changed, 23 insertions(+), 2 deletions(-)
> >
> > diff --git a/src/fw/pciinit.c b/src/fw/pciinit.c
> > index 0ad548f..edb3fe9 100644
> > --- a/src/fw/pciinit.c
> > +++ b/src/fw/pciinit.c
> > @@ -636,6 +636,25 @@ pci_region_create_entry(struct pci_bus *bus, struct pci_device *dev,
> > return entry;
> > }
> >
> > +static int pci_bus_hotplug_support(struct pci_bus *bus)
> > +{
> > + u8 shpc_cap = pci_find_capability(bus->bus_dev, PCI_CAP_ID_SHPC);
> > + u8 pcie_cap = pci_find_capability(bus->bus_dev, PCI_CAP_ID_EXP);
> > + int downstream_port = 0;
> > + int slot_implemented = 0;
> > +
> > + if (pcie_cap) {
> > + u16 pcie_flags = pci_config_readw(bus->bus_dev->bdf,
> > + pcie_cap + PCI_EXP_FLAGS);
> > + u16 port_type = ((pcie_flags & PCI_EXP_FLAGS_TYPE) >>
> > + PCI_EXP_FLAGS_TYPE_SHIFT) & 0xf;
>
> 0xf is not needed here: PCI_EXP_FLAGS_TYPE is enough.
> Also should be u8.
OK, thanks
>
> > + downstream_port = (port_type == PCI_EXP_TYPE_DOWNSTREAM) ||
> > + (port_type == PCI_EXP_TYPE_ROOT_PORT);
>
> This is correct, the spec says:
> Configuration Space, and other capabilities.
> 8 Slot Implemented – When Set, this bit indicates that the Link
> HwInit associated with this Port is connected to a slot (as compared to
> being connected to a system-integrated device or being
> disabled).
> This bit is valid for Downstream Ports. This bit is undefined for
> Upstream Ports.
>
> Maybe add a comment in case people will wonder.
Sure
>
> > + slot_implemented = !!(pcie_flags & PCI_EXP_FLAGS_SLOT);
>
> I would do
> return downstream_port && slot_implemented;
> here, avoid testing shpc for express devices.
>
> Also allows moving downstream_port && slot_implemented here.
Makes sense
>
> > + }
> > + return shpc_cap || (downstream_port && slot_implemented);
> > +}
> > +
> > static int pci_bios_check_devices(struct pci_bus *busses)
> > {
> > dprintf(1, "PCI: check devices\n");
> > @@ -678,7 +697,7 @@ static int pci_bios_check_devices(struct pci_bus *busses)
> > continue;
> > struct pci_bus *parent = &busses[pci_bdf_to_bus(s->bus_dev->bdf)];
> > int type;
> > - u8 shpc_cap = pci_find_capability(s->bus_dev, PCI_CAP_ID_SHPC);
> > + int hotplug_support = pci_bus_hotplug_support(s);
> > for (type = 0; type < PCI_REGION_TYPE_COUNT; type++) {
> > u64 align = (type == PCI_REGION_TYPE_IO) ?
> > PCI_BRIDGE_IO_MIN : PCI_BRIDGE_MEM_MIN;
> > @@ -687,7 +706,7 @@ static int pci_bios_check_devices(struct pci_bus *busses)
> > if (pci_region_align(&s->r[type]) > align)
> > align = pci_region_align(&s->r[type]);
> > u64 sum = pci_region_sum(&s->r[type]);
> > - if (!sum && shpc_cap)
> > + if (!sum && hotplug_support)
> > sum = align; /* reserve min size for hot-plug */
> > u64 size = ALIGN(sum, align);
> > int is64 = pci_bios_bridge_region_is64(&s->r[type],
> > diff --git a/src/hw/pci_regs.h b/src/hw/pci_regs.h
> > index e5effd4..6a71569 100644
> > --- a/src/hw/pci_regs.h
> > +++ b/src/hw/pci_regs.h
> > @@ -426,6 +426,8 @@
> > #define PCI_EXP_DEVCTL2 40 /* Device Control 2 */
> > #define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */
> >
> > +#define PCI_EXP_FLAGS_TYPE_SHIFT 4
> > +
>
> It's generally not a good idea to randomly add macros
> in random places.
> In this case this is not needed. Just call __ffs on
> PCI_EXP_FLAGS_TYPE.
I didn't see any usage of __ffs method on seabios code, so
I wondered if adding an include to string.h would be ok.
Would it?
Thanks,
Marcel
>
> > /* Extended Capabilities (PCI-X 2.0 and Express) */
> > #define PCI_EXT_CAP_ID(header) (header & 0x0000ffff)
> > #define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf)
> > --
> > 1.8.3.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Qemu-devel] [PATCH] hw/pci: reserve IO and mem for pci express downstream ports with no devices attached
2014-06-19 14:31 ` Marcel Apfelbaum
@ 2014-06-19 14:50 ` Michael S. Tsirkin
0 siblings, 0 replies; 4+ messages in thread
From: Michael S. Tsirkin @ 2014-06-19 14:50 UTC (permalink / raw)
To: Marcel Apfelbaum; +Cc: kevin, seabios, qemu-devel
On Thu, Jun 19, 2014 at 05:31:26PM +0300, Marcel Apfelbaum wrote:
> On Thu, 2014-06-19 at 17:21 +0300, Michael S. Tsirkin wrote:
> > On Thu, Jun 19, 2014 at 04:52:17PM +0300, Marcel Apfelbaum wrote:
> > > commit c6e298e1f12e0f4ca02b6da5e42919ae055f6830
> > > hw/pci: reserve IO and mem for pci-2-pci bridges with no devices attached
> > >
> > > introduced support for hot-plugging devices behind pci-2-pci bridges.
> > > Extend hotplug support also for pci express downstream ports.
> > >
> > > Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
> > > ---
> > > src/fw/pciinit.c | 23 +++++++++++++++++++++--
> > > src/hw/pci_regs.h | 2 ++
> > > 2 files changed, 23 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/src/fw/pciinit.c b/src/fw/pciinit.c
> > > index 0ad548f..edb3fe9 100644
> > > --- a/src/fw/pciinit.c
> > > +++ b/src/fw/pciinit.c
> > > @@ -636,6 +636,25 @@ pci_region_create_entry(struct pci_bus *bus, struct pci_device *dev,
> > > return entry;
> > > }
> > >
> > > +static int pci_bus_hotplug_support(struct pci_bus *bus)
> > > +{
> > > + u8 shpc_cap = pci_find_capability(bus->bus_dev, PCI_CAP_ID_SHPC);
> > > + u8 pcie_cap = pci_find_capability(bus->bus_dev, PCI_CAP_ID_EXP);
> > > + int downstream_port = 0;
> > > + int slot_implemented = 0;
> > > +
> > > + if (pcie_cap) {
> > > + u16 pcie_flags = pci_config_readw(bus->bus_dev->bdf,
> > > + pcie_cap + PCI_EXP_FLAGS);
> > > + u16 port_type = ((pcie_flags & PCI_EXP_FLAGS_TYPE) >>
> > > + PCI_EXP_FLAGS_TYPE_SHIFT) & 0xf;
> >
> > 0xf is not needed here: PCI_EXP_FLAGS_TYPE is enough.
> > Also should be u8.
> OK, thanks
> >
> > > + downstream_port = (port_type == PCI_EXP_TYPE_DOWNSTREAM) ||
> > > + (port_type == PCI_EXP_TYPE_ROOT_PORT);
> >
> > This is correct, the spec says:
> > Configuration Space, and other capabilities.
> > 8 Slot Implemented – When Set, this bit indicates that the Link
> > HwInit associated with this Port is connected to a slot (as compared to
> > being connected to a system-integrated device or being
> > disabled).
> > This bit is valid for Downstream Ports. This bit is undefined for
> > Upstream Ports.
> >
> > Maybe add a comment in case people will wonder.
> Sure
>
> >
> > > + slot_implemented = !!(pcie_flags & PCI_EXP_FLAGS_SLOT);
> >
> > I would do
> > return downstream_port && slot_implemented;
> > here, avoid testing shpc for express devices.
> >
> > Also allows moving downstream_port && slot_implemented here.
> Makes sense
>
> >
> > > + }
> > > + return shpc_cap || (downstream_port && slot_implemented);
> > > +}
> > > +
> > > static int pci_bios_check_devices(struct pci_bus *busses)
> > > {
> > > dprintf(1, "PCI: check devices\n");
> > > @@ -678,7 +697,7 @@ static int pci_bios_check_devices(struct pci_bus *busses)
> > > continue;
> > > struct pci_bus *parent = &busses[pci_bdf_to_bus(s->bus_dev->bdf)];
> > > int type;
> > > - u8 shpc_cap = pci_find_capability(s->bus_dev, PCI_CAP_ID_SHPC);
> > > + int hotplug_support = pci_bus_hotplug_support(s);
> > > for (type = 0; type < PCI_REGION_TYPE_COUNT; type++) {
> > > u64 align = (type == PCI_REGION_TYPE_IO) ?
> > > PCI_BRIDGE_IO_MIN : PCI_BRIDGE_MEM_MIN;
> > > @@ -687,7 +706,7 @@ static int pci_bios_check_devices(struct pci_bus *busses)
> > > if (pci_region_align(&s->r[type]) > align)
> > > align = pci_region_align(&s->r[type]);
> > > u64 sum = pci_region_sum(&s->r[type]);
> > > - if (!sum && shpc_cap)
> > > + if (!sum && hotplug_support)
> > > sum = align; /* reserve min size for hot-plug */
> > > u64 size = ALIGN(sum, align);
> > > int is64 = pci_bios_bridge_region_is64(&s->r[type],
> > > diff --git a/src/hw/pci_regs.h b/src/hw/pci_regs.h
> > > index e5effd4..6a71569 100644
> > > --- a/src/hw/pci_regs.h
> > > +++ b/src/hw/pci_regs.h
> > > @@ -426,6 +426,8 @@
> > > #define PCI_EXP_DEVCTL2 40 /* Device Control 2 */
> > > #define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */
> > >
> > > +#define PCI_EXP_FLAGS_TYPE_SHIFT 4
> > > +
> >
> > It's generally not a good idea to randomly add macros
> > in random places.
> > In this case this is not needed. Just call __ffs on
> > PCI_EXP_FLAGS_TYPE.
> I didn't see any usage of __ffs method on seabios code, so
> I wondered if adding an include to string.h would be ok.
> Would it?
>
> Thanks,
> Marcel
No - seabios has its own string.h, but src/x86.h has __ffs.
Or you can use __builtin_ffs: it's optimized out
for a constant parameter, anyway.
> >
> > > /* Extended Capabilities (PCI-X 2.0 and Express) */
> > > #define PCI_EXT_CAP_ID(header) (header & 0x0000ffff)
> > > #define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf)
> > > --
> > > 1.8.3.1
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-06-19 14:50 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-06-19 13:52 [Qemu-devel] [PATCH] hw/pci: reserve IO and mem for pci express downstream ports with no devices attached Marcel Apfelbaum
2014-06-19 14:21 ` Michael S. Tsirkin
2014-06-19 14:31 ` Marcel Apfelbaum
2014-06-19 14:50 ` Michael S. Tsirkin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).