qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Benoît Canet" <benoit.canet@irqsave.net>
To: Liu Yuan <namei.unix@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>,
	qemu-devel@nongnu.org, Stefan Hajnoczi <stefanha@redhat.com>
Subject: Re: [Qemu-devel] [PATCH v4 2/2] block/quorum: add simple read pattern support
Date: Mon, 11 Aug 2014 14:31:43 +0200	[thread overview]
Message-ID: <20140811123143.GA2386@irqsave.net> (raw)
In-Reply-To: <1405574336-3794-3-git-send-email-namei.unix@gmail.com>

The Thursday 17 Jul 2014 à 13:18:56 (+0800), Liu Yuan wrote :
> This patch adds single read pattern to quorum driver and quorum vote is default
> pattern.
> 
> For now we do a quorum vote on all the reads, it is designed for unreliable
> underlying storage such as non-redundant NFS to make sure data integrity at the
> cost of the read performance.
> 
> For some use cases as following:
> 
>         VM
>   --------------
>   |            |
>   v            v
>   A            B
> 
> Both A and B has hardware raid storage to justify the data integrity on its own.
> So it would help performance if we do a single read instead of on all the nodes.
> Further, if we run VM on either of the storage node, we can make a local read
> request for better performance.
> 
> This patch generalize the above 2 nodes case in the N nodes. That is,
> 
> vm -> write to all the N nodes, read just one of them. If single read fails, we
> try to read next node in FIFO order specified by the startup command.
> 
> The 2 nodes case is very similar to DRBD[1] though lack of auto-sync
> functionality in the single device/node failure for now. But compared with DRBD
> we still have some advantages over it:
> 
> - Suppose we have 20 VMs running on one(assume A) of 2 nodes' DRBD backed
> storage. And if A crashes, we need to restart all the VMs on node B. But for
> practice case, we can't because B might not have enough resources to setup 20 VMs
> at once. So if we run our 20 VMs with quorum driver, and scatter the replicated
> images over the data center, we can very likely restart 20 VMs without any
> resource problem.
> 
> After all, I think we can build a more powerful replicated image functionality
> on quorum and block jobs(block mirror) to meet various High Availibility needs.
> 
> E.g, Enable single read pattern on 2 children,
> 
> -drive driver=quorum,children.0.file.filename=0.qcow2,\
> children.1.file.filename=1.qcow2,read-pattern=fifo,vote-threshold=1
> 
> [1] http://en.wikipedia.org/wiki/Distributed_Replicated_Block_Device
> 
> Cc: Benoit Canet <benoit@irqsave.net>
> Cc: Eric Blake <eblake@redhat.com>
> Cc: Kevin Wolf <kwolf@redhat.com>
> Cc: Stefan Hajnoczi <stefanha@redhat.com>
> Signed-off-by: Liu Yuan <namei.unix@gmail.com>
> ---
>  block/quorum.c | 179 +++++++++++++++++++++++++++++++++++++++++----------------
>  1 file changed, 131 insertions(+), 48 deletions(-)
> 
> diff --git a/block/quorum.c b/block/quorum.c
> index d5ee9c0..ebf5c71 100644
> --- a/block/quorum.c
> +++ b/block/quorum.c
> @@ -24,6 +24,7 @@
>  #define QUORUM_OPT_VOTE_THRESHOLD "vote-threshold"
>  #define QUORUM_OPT_BLKVERIFY      "blkverify"
>  #define QUORUM_OPT_REWRITE        "rewrite-corrupted"
> +#define QUORUM_OPT_READ_PATTERN   "read-pattern"
>  
>  /* This union holds a vote hash value */
>  typedef union QuorumVoteValue {
> @@ -74,6 +75,8 @@ typedef struct BDRVQuorumState {
>      bool rewrite_corrupted;/* true if the driver must rewrite-on-read corrupted
>                              * block if Quorum is reached.
>                              */
> +
> +    QuorumReadPattern read_pattern;
>  } BDRVQuorumState;
>  
>  typedef struct QuorumAIOCB QuorumAIOCB;
> @@ -117,6 +120,7 @@ struct QuorumAIOCB {
>  
>      bool is_read;
>      int vote_ret;
> +    int child_iter;             /* which child to read in fifo pattern */
>  };
>  
>  static bool quorum_vote(QuorumAIOCB *acb);
> @@ -154,8 +158,10 @@ static void quorum_aio_finalize(QuorumAIOCB *acb)
>  
>      if (acb->is_read) {
>          for (i = 0; i < s->num_children; i++) {
> -            qemu_vfree(acb->qcrs[i].buf);
> -            qemu_iovec_destroy(&acb->qcrs[i].qiov);
> +            if (i <= acb->child_iter) {
> +                qemu_vfree(acb->qcrs[i].buf);
> +                qemu_iovec_destroy(&acb->qcrs[i].qiov);
> +            }
>          }
>      }
>  
> @@ -256,6 +262,21 @@ static void quorum_rewrite_aio_cb(void *opaque, int ret)
>      quorum_aio_finalize(acb);
>  }
>  
> +static BlockDriverAIOCB *read_fifo_child(QuorumAIOCB *acb);
> +
> +static void quorum_copy_qiov(QEMUIOVector *dest, QEMUIOVector *source)
> +{
> +    int i;
> +    assert(dest->niov == source->niov);
> +    assert(dest->size == source->size);
> +    for (i = 0; i < source->niov; i++) {
> +        assert(dest->iov[i].iov_len == source->iov[i].iov_len);
> +        memcpy(dest->iov[i].iov_base,
> +               source->iov[i].iov_base,
> +               source->iov[i].iov_len);
> +    }
> +}
> +
>  static void quorum_aio_cb(void *opaque, int ret)
>  {
>      QuorumChildRequest *sacb = opaque;
> @@ -263,6 +284,21 @@ static void quorum_aio_cb(void *opaque, int ret)
>      BDRVQuorumState *s = acb->common.bs->opaque;
>      bool rewrite = false;
>  
> +    if (acb->is_read && s->read_pattern == QUORUM_READ_PATTERN_FIFO) {
> +        /* We try to read next child in FIFO order if we fail to read */
> +        if (ret < 0 && ++acb->child_iter < s->num_children) {
> +            read_fifo_child(acb);
> +            return;
> +        }
> +
> +        if (ret == 0) {
> +            quorum_copy_qiov(acb->qiov, &acb->qcrs[acb->child_iter].qiov);
> +        }
> +        acb->vote_ret = ret;
> +        quorum_aio_finalize(acb);
> +        return;
> +    }
> +
>      sacb->ret = ret;
>      acb->count++;
>      if (ret == 0) {
> @@ -343,19 +379,6 @@ static bool quorum_rewrite_bad_versions(BDRVQuorumState *s, QuorumAIOCB *acb,
>      return count;
>  }
>  
> -static void quorum_copy_qiov(QEMUIOVector *dest, QEMUIOVector *source)
> -{
> -    int i;
> -    assert(dest->niov == source->niov);
> -    assert(dest->size == source->size);
> -    for (i = 0; i < source->niov; i++) {
> -        assert(dest->iov[i].iov_len == source->iov[i].iov_len);
> -        memcpy(dest->iov[i].iov_base,
> -               source->iov[i].iov_base,
> -               source->iov[i].iov_len);
> -    }
> -}
> -
>  static void quorum_count_vote(QuorumVotes *votes,
>                                QuorumVoteValue *value,
>                                int index)
> @@ -615,34 +638,62 @@ free_exit:
>      return rewrite;
>  }
>  
> -static BlockDriverAIOCB *quorum_aio_readv(BlockDriverState *bs,
> -                                         int64_t sector_num,
> -                                         QEMUIOVector *qiov,
> -                                         int nb_sectors,
> -                                         BlockDriverCompletionFunc *cb,
> -                                         void *opaque)
> +static BlockDriverAIOCB *read_quorum_children(QuorumAIOCB *acb)
>  {
> -    BDRVQuorumState *s = bs->opaque;
> -    QuorumAIOCB *acb = quorum_aio_get(s, bs, qiov, sector_num,
> -                                      nb_sectors, cb, opaque);
> +    BDRVQuorumState *s = acb->common.bs->opaque;
>      int i;
>  
> -    acb->is_read = true;
> -
>      for (i = 0; i < s->num_children; i++) {
> -        acb->qcrs[i].buf = qemu_blockalign(s->bs[i], qiov->size);
> -        qemu_iovec_init(&acb->qcrs[i].qiov, qiov->niov);
> -        qemu_iovec_clone(&acb->qcrs[i].qiov, qiov, acb->qcrs[i].buf);
> +        acb->qcrs[i].buf = qemu_blockalign(s->bs[i], acb->qiov->size);
> +        qemu_iovec_init(&acb->qcrs[i].qiov, acb->qiov->niov);
> +        qemu_iovec_clone(&acb->qcrs[i].qiov, acb->qiov, acb->qcrs[i].buf);
>      }
>  
>      for (i = 0; i < s->num_children; i++) {
> -        bdrv_aio_readv(s->bs[i], sector_num, &acb->qcrs[i].qiov, nb_sectors,
> -                       quorum_aio_cb, &acb->qcrs[i]);
> +        bdrv_aio_readv(s->bs[i], acb->sector_num, &acb->qcrs[i].qiov,
> +                       acb->nb_sectors, quorum_aio_cb, &acb->qcrs[i]);
>      }
>  
>      return &acb->common;
>  }
>  
> +static BlockDriverAIOCB *read_fifo_child(QuorumAIOCB *acb)
> +{
> +    BDRVQuorumState *s = acb->common.bs->opaque;
> +
> +    acb->qcrs[acb->child_iter].buf = qemu_blockalign(s->bs[acb->child_iter],
> +                                                     acb->qiov->size);
> +    qemu_iovec_init(&acb->qcrs[acb->child_iter].qiov, acb->qiov->niov);
> +    qemu_iovec_clone(&acb->qcrs[acb->child_iter].qiov, acb->qiov,
> +                     acb->qcrs[acb->child_iter].buf);
> +    bdrv_aio_readv(s->bs[acb->child_iter], acb->sector_num,
> +                   &acb->qcrs[acb->child_iter].qiov, acb->nb_sectors,
> +                   quorum_aio_cb, &acb->qcrs[acb->child_iter]);
> +
> +    return &acb->common;
> +}
> +
> +static BlockDriverAIOCB *quorum_aio_readv(BlockDriverState *bs,
> +                                          int64_t sector_num,
> +                                          QEMUIOVector *qiov,
> +                                          int nb_sectors,
> +                                          BlockDriverCompletionFunc *cb,
> +                                          void *opaque)
> +{
> +    BDRVQuorumState *s = bs->opaque;
> +    QuorumAIOCB *acb = quorum_aio_get(s, bs, qiov, sector_num,
> +                                      nb_sectors, cb, opaque);
> +    acb->is_read = true;
> +
> +    if (s->read_pattern == QUORUM_READ_PATTERN_QUORUM) {
> +        acb->child_iter = s->num_children - 1;
> +        return read_quorum_children(acb);
> +    }
> +
> +    acb->child_iter = 0;
> +    return read_fifo_child(acb);
> +}
> +
>  static BlockDriverAIOCB *quorum_aio_writev(BlockDriverState *bs,
>                                            int64_t sector_num,
>                                            QEMUIOVector *qiov,
> @@ -782,10 +833,33 @@ static QemuOptsList quorum_runtime_opts = {
>              .type = QEMU_OPT_BOOL,
>              .help = "Rewrite corrupted block on read quorum",
>          },
> +        {
> +            .name = QUORUM_OPT_READ_PATTERN,
> +            .type = QEMU_OPT_STRING,
> +            .help = "Allowed pattern: quorum, fifo. Quorum is default",
> +        },
>          { /* end of list */ }
>      },
>  };
>  
> +static int parse_read_pattern(const char *opt)
> +{
> +    int i;
> +
> +    if (!opt) {
> +        /* Set quorum as default */
> +        return QUORUM_READ_PATTERN_QUORUM;
> +    }
> +
> +    for (i = 0; i < QUORUM_READ_PATTERN_MAX; i++) {
> +        if (!strcmp(opt, QuorumReadPattern_lookup[i])) {
> +            return i;
> +        }
> +    }
> +
> +    return -EINVAL;
> +}
> +
>  static int quorum_open(BlockDriverState *bs, QDict *options, int flags,
>                         Error **errp)
>  {
> @@ -827,28 +901,37 @@ static int quorum_open(BlockDriverState *bs, QDict *options, int flags,
>      }
>  
>      s->threshold = qemu_opt_get_number(opts, QUORUM_OPT_VOTE_THRESHOLD, 0);
> -
> -    /* and validate it against s->num_children */
> -    ret = quorum_valid_threshold(s->threshold, s->num_children, &local_err);
> +    ret = parse_read_pattern(qemu_opt_get(opts, QUORUM_OPT_READ_PATTERN));
>      if (ret < 0) {
> +        error_setg(&local_err, "Please set read-pattern as fifo or quorum\n");
>          goto exit;
>      }
> +    s->read_pattern = ret;
>  
> -    /* is the driver in blkverify mode */
> -    if (qemu_opt_get_bool(opts, QUORUM_OPT_BLKVERIFY, false) &&
> -        s->num_children == 2 && s->threshold == 2) {
> -        s->is_blkverify = true;
> -    } else if (qemu_opt_get_bool(opts, QUORUM_OPT_BLKVERIFY, false)) {
> -        fprintf(stderr, "blkverify mode is set by setting blkverify=on "
> -                "and using two files with vote_threshold=2\n");
> -    }
> +    if (s->read_pattern == QUORUM_READ_PATTERN_QUORUM) {
> +        /* and validate it against s->num_children */
> +        ret = quorum_valid_threshold(s->threshold, s->num_children, &local_err);
> +        if (ret < 0) {
> +            goto exit;
> +        }
>  
> -    s->rewrite_corrupted = qemu_opt_get_bool(opts, QUORUM_OPT_REWRITE, false);
> -    if (s->rewrite_corrupted && s->is_blkverify) {
> -        error_setg(&local_err,
> -                   "rewrite-corrupted=on cannot be used with blkverify=on");
> -        ret = -EINVAL;
> -        goto exit;
> +        /* is the driver in blkverify mode */
> +        if (qemu_opt_get_bool(opts, QUORUM_OPT_BLKVERIFY, false) &&
> +            s->num_children == 2 && s->threshold == 2) {
> +            s->is_blkverify = true;
> +        } else if (qemu_opt_get_bool(opts, QUORUM_OPT_BLKVERIFY, false)) {
> +            fprintf(stderr, "blkverify mode is set by setting blkverify=on "
> +                    "and using two files with vote_threshold=2\n");
> +        }
> +
> +        s->rewrite_corrupted = qemu_opt_get_bool(opts, QUORUM_OPT_REWRITE,
> +                                                 false);
> +        if (s->rewrite_corrupted && s->is_blkverify) {
> +            error_setg(&local_err,
> +                       "rewrite-corrupted=on cannot be used with blkverify=on");
> +            ret = -EINVAL;
> +            goto exit;
> +        }
>      }
>  
>      /* allocate the children BlockDriverState array */
> -- 
> 1.9.1
> 

I think I responded you with comments signaling a potential memory leak but you missed it.

Best regards

Benoît

  parent reply	other threads:[~2014-08-11 12:32 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-17  5:18 [Qemu-devel] [PATCH v4 0/2] add read-pattern for block qourum Liu Yuan
2014-07-17  5:18 ` [Qemu-devel] [PATCH v4 1/2] qapi: add read-pattern enum for quorum Liu Yuan
2014-08-11 16:42   ` Eric Blake
2014-07-17  5:18 ` [Qemu-devel] [PATCH v4 2/2] block/quorum: add simple read pattern support Liu Yuan
2014-08-11  7:18   ` Liu Yuan
2014-08-11 12:31   ` Benoît Canet [this message]
2014-08-12  2:41     ` Liu Yuan
2014-08-14  7:01       ` Liu Yuan
2014-08-14 11:09   ` Benoît Canet
2014-08-15  4:51     ` Liu Yuan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140811123143.GA2386@irqsave.net \
    --to=benoit.canet@irqsave.net \
    --cc=kwolf@redhat.com \
    --cc=namei.unix@gmail.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).