From: "Benoît Canet" <benoit.canet@nodalink.com>
To: Max Reitz <mreitz@redhat.com>
Cc: "Kevin Wolf" <kwolf@redhat.com>,
qemu-devel@nongnu.org, "Stefan Hajnoczi" <stefanha@redhat.com>,
"Benoît Canet" <benoit.canet@nodalink.com>
Subject: Re: [Qemu-devel] [PATCH v3 05/10] qcow2: Fix refcount blocks beyond image end
Date: Fri, 22 Aug 2014 18:20:29 +0000 [thread overview]
Message-ID: <20140822182029.GF9526@nodalink.com> (raw)
In-Reply-To: <1408725104-17176-6-git-send-email-mreitz@redhat.com>
On Fri, Aug 22, 2014 at 06:31:39PM +0200, Max Reitz wrote:
> If the qcow2 check function detects a refcount block located beyond the
> image end, grow the image appropriately. This cannot break anything and
> is the logical fix for such a case.
>
> Signed-off-by: Max Reitz <mreitz@redhat.com>
> ---
> block/qcow2-refcount.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 46 insertions(+), 4 deletions(-)
>
> diff --git a/block/qcow2-refcount.c b/block/qcow2-refcount.c
> index babe6cb..1f0f44e 100644
> --- a/block/qcow2-refcount.c
> +++ b/block/qcow2-refcount.c
> @@ -1505,7 +1505,8 @@ static int check_refblocks(BlockDriverState *bs, BdrvCheckResult *res,
> int64_t *nb_clusters)
> {
> BDRVQcowState *s = bs->opaque;
> - int64_t i;
> + int64_t i, size;
> + int ret;
>
> for(i = 0; i < s->refcount_table_size; i++) {
> uint64_t offset, cluster;
> @@ -1521,9 +1522,50 @@ static int check_refblocks(BlockDriverState *bs, BdrvCheckResult *res,
> }
>
> if (cluster >= *nb_clusters) {
> - fprintf(stderr, "ERROR refcount block %" PRId64
> - " is outside image\n", i);
> - res->corruptions++;
> + fprintf(stderr, "%s refcount block %" PRId64 " is outside image\n",
> + fix & BDRV_FIX_ERRORS ? "Repairing" : "ERROR", i);
> +
> + if (fix & BDRV_FIX_ERRORS) {
> + int64_t old_nb_clusters = *nb_clusters;
> +
> + ret = bdrv_truncate(bs->file, offset + s->cluster_size);
> + if (ret < 0) {
> + goto resize_fail;
> + }
> + size = bdrv_getlength(bs->file);
> + if (size < 0) {
> + ret = size;
> + goto resize_fail;
> + }
> +
> + *nb_clusters = size_to_clusters(s, size);
> + assert(*nb_clusters >= old_nb_clusters);
> +
> + *refcount_table = g_try_realloc(*refcount_table,
> + *nb_clusters * sizeof(uint16_t));
> + if (!*refcount_table) {
> + res->check_errors++;
> + return -ENOMEM;
> + }
> +
> + memset(*refcount_table + old_nb_clusters, 0,
> + (*nb_clusters - old_nb_clusters) * sizeof(uint16_t));
> +
> + if (cluster >= *nb_clusters) {
> + ret = -EINVAL;
> + goto resize_fail;
> + }
> +
> + res->corruptions_fixed++;
> + continue;
> +
> +resize_fail:
> + res->corruptions++;
> + fprintf(stderr, "ERROR could not resize image: %s\n",
> + strerror(-ret));
> + } else {
> + res->corruptions++;
> + }
> continue;
> }
>
> --
> 2.0.4
>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
next prev parent reply other threads:[~2014-08-22 18:20 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-22 16:31 [Qemu-devel] [PATCH v3 00/10] qcow2: Fix image repairing Max Reitz
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 01/10] qcow2: Fix leaks in dirty images Max Reitz
2014-08-22 18:44 ` Benoît Canet
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 02/10] qcow2: Split qcow2_check_refcounts() Max Reitz
2014-08-22 18:03 ` Benoît Canet
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 03/10] qcow2: Pull check_refblocks() up Max Reitz
2014-08-22 18:04 ` Benoît Canet
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 04/10] qcow2: Reuse refcount table in calculate_refcounts() Max Reitz
2014-08-22 18:07 ` Benoît Canet
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 05/10] qcow2: Fix refcount blocks beyond image end Max Reitz
2014-08-22 18:20 ` Benoît Canet [this message]
2014-08-26 13:07 ` Eric Blake
2014-08-26 18:06 ` Max Reitz
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 06/10] qcow2: Do not perform potentially damaging repairs Max Reitz
2014-08-22 18:25 ` Benoît Canet
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 07/10] qcow2: Rebuild refcount structure during check Max Reitz
2014-08-25 17:40 ` Benoît Canet
2014-08-27 18:37 ` Max Reitz
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 08/10] qcow2: Clean up after refcount rebuild Max Reitz
2014-08-22 18:43 ` Benoît Canet
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 09/10] iotests: Fix test outputs Max Reitz
2014-08-26 13:09 ` Eric Blake
2014-08-26 18:03 ` Max Reitz
2014-08-22 16:31 ` [Qemu-devel] [PATCH v3 10/10] iotests: Add test for potentially damaging repairs Max Reitz
2014-08-22 18:50 ` Benoît Canet
2014-08-22 19:55 ` Eric Blake
2014-08-22 20:55 ` Benoît Canet
2014-08-26 17:53 ` Max Reitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140822182029.GF9526@nodalink.com \
--to=benoit.canet@nodalink.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).