* [Qemu-devel] [PATCH v2 3/4] pci: Update pci_regs header
2014-09-02 11:00 [Qemu-devel] [PATCH v2 0/4] pcie: Add support for Single Root I/O Virtualization Knut Omang
2014-09-02 11:00 ` [Qemu-devel] [PATCH v2 1/4] pci: Make use of the devfn property when registering new devices Knut Omang
2014-09-02 11:00 ` [Qemu-devel] [PATCH v2 2/4] pci: Avoid losing config updates to MSI/MSIX cap regs Knut Omang
@ 2014-09-02 11:00 ` Knut Omang
2014-09-02 11:00 ` [Qemu-devel] [PATCH v2 4/4] pcie: Add support for Single Root I/O Virtualization (SR/IOV) Knut Omang
3 siblings, 0 replies; 10+ messages in thread
From: Knut Omang @ 2014-09-02 11:00 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Peter Crosthwaite, Stefan Hajnoczi,
Michael S. Tsirkin, Laszlo Ersek, Gabriel Somlo, Knut Omang,
Alexander Graf, Fabien Chouteau, Luiz Capitulino,
Beniamino Galvani, Alex Williamson, Gonglei (Arei), Jan Kiszka,
Anthony Liguori, Paolo Bonzini, Amos Kong
Pulls in latest version from kernel v3.16
msi: Removed local definitions now in pci_regs.h
Also replace usage of PCI_MSIX_FLAGS_BIRMASK with PCI_MSIX_TABLE_BIR
to keep in sync with the kernel for future updates.
Signed-off-by: Knut Omang <knut.omang@oracle.com>
---
hw/i386/kvm/pci-assign.c | 4 +-
hw/misc/vfio.c | 8 +-
hw/pci/msi.c | 4 -
hw/pci/msix.c | 2 +-
include/hw/pci/pci_regs.h | 371 ++++++++++++++++++++++++++++++++++------------
5 files changed, 285 insertions(+), 104 deletions(-)
diff --git a/hw/i386/kvm/pci-assign.c b/hw/i386/kvm/pci-assign.c
index 17c7d6dc..a2285c4 100644
--- a/hw/i386/kvm/pci-assign.c
+++ b/hw/i386/kvm/pci-assign.c
@@ -1321,8 +1321,8 @@ static int assigned_device_pci_cap_init(PCIDevice *pci_dev, Error **errp)
PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL);
msix_table_entry = pci_get_long(pci_dev->config + pos + PCI_MSIX_TABLE);
- bar_nr = msix_table_entry & PCI_MSIX_FLAGS_BIRMASK;
- msix_table_entry &= ~PCI_MSIX_FLAGS_BIRMASK;
+ bar_nr = msix_table_entry & PCI_MSIX_TABLE_BIR;
+ msix_table_entry &= ~PCI_MSIX_TABLE_BIR;
dev->msix_table_addr = pci_region[bar_nr].base_addr + msix_table_entry;
dev->msix_max = msix_max;
}
diff --git a/hw/misc/vfio.c b/hw/misc/vfio.c
index 40dcaa6..f275084 100644
--- a/hw/misc/vfio.c
+++ b/hw/misc/vfio.c
@@ -2799,10 +2799,10 @@ static int vfio_early_setup_msix(VFIODevice *vdev)
pba = le32_to_cpu(pba);
vdev->msix = g_malloc0(sizeof(*(vdev->msix)));
- vdev->msix->table_bar = table & PCI_MSIX_FLAGS_BIRMASK;
- vdev->msix->table_offset = table & ~PCI_MSIX_FLAGS_BIRMASK;
- vdev->msix->pba_bar = pba & PCI_MSIX_FLAGS_BIRMASK;
- vdev->msix->pba_offset = pba & ~PCI_MSIX_FLAGS_BIRMASK;
+ vdev->msix->table_bar = table & PCI_MSIX_TABLE_BIR;
+ vdev->msix->table_offset = table & ~PCI_MSIX_TABLE_BIR;
+ vdev->msix->pba_bar = pba & PCI_MSIX_TABLE_BIR;
+ vdev->msix->pba_offset = pba & ~PCI_MSIX_TABLE_BIR;
vdev->msix->entries = (ctrl & PCI_MSIX_FLAGS_QSIZE) + 1;
DPRINTF("%04x:%02x:%02x.%x "
diff --git a/hw/pci/msi.c b/hw/pci/msi.c
index 52d2313..1d25b62 100644
--- a/hw/pci/msi.c
+++ b/hw/pci/msi.c
@@ -21,10 +21,6 @@
#include "hw/pci/msi.h"
#include "qemu/range.h"
-/* Eventually those constants should go to Linux pci_regs.h */
-#define PCI_MSI_PENDING_32 0x10
-#define PCI_MSI_PENDING_64 0x14
-
/* PCI_MSI_ADDRESS_LO */
#define PCI_MSI_ADDRESS_LO_MASK (~0x3)
diff --git a/hw/pci/msix.c b/hw/pci/msix.c
index 24de260..8206264 100644
--- a/hw/pci/msix.c
+++ b/hw/pci/msix.c
@@ -250,7 +250,7 @@ int msix_init(struct PCIDevice *dev, unsigned short nentries,
ranges_overlap(table_offset, table_size, pba_offset, pba_size)) ||
table_offset + table_size > memory_region_size(table_bar) ||
pba_offset + pba_size > memory_region_size(pba_bar) ||
- (table_offset | pba_offset) & PCI_MSIX_FLAGS_BIRMASK) {
+ (table_offset | pba_offset) & PCI_MSIX_TABLE_BIR) {
return -EINVAL;
}
diff --git a/include/hw/pci/pci_regs.h b/include/hw/pci/pci_regs.h
index 56a404b..30db069 100644
--- a/include/hw/pci/pci_regs.h
+++ b/include/hw/pci/pci_regs.h
@@ -13,10 +13,10 @@
* PCI to PCI Bridge Specification
* PCI System Design Guide
*
- * For hypertransport information, please consult the following manuals
- * from http://www.hypertransport.org
+ * For HyperTransport information, please consult the following manuals
+ * from http://www.hypertransport.org
*
- * The Hypertransport I/O Link Specification
+ * The HyperTransport I/O Link Specification
*/
#ifndef LINUX_PCI_REGS_H
@@ -26,6 +26,7 @@
* Under PCI, each device has 256 bytes of configuration address space,
* of which the first 64 bytes are standardized as follows:
*/
+#define PCI_STD_HEADER_SIZEOF 64
#define PCI_VENDOR_ID 0x00 /* 16 bits */
#define PCI_DEVICE_ID 0x02 /* 16 bits */
#define PCI_COMMAND 0x04 /* 16 bits */
@@ -36,7 +37,7 @@
#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */
#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */
#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */
-#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */
+#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */
#define PCI_COMMAND_SERR 0x100 /* Enable SERR */
#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */
#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
@@ -44,7 +45,7 @@
#define PCI_STATUS 0x06 /* 16 bits */
#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */
#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */
-#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */
+#define PCI_STATUS_66MHZ 0x20 /* Support 66 MHz PCI 2.1 bus */
#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */
#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */
#define PCI_STATUS_PARITY 0x100 /* Detected parity error */
@@ -125,7 +126,8 @@
#define PCI_IO_RANGE_TYPE_MASK 0x0fUL /* I/O bridging type */
#define PCI_IO_RANGE_TYPE_16 0x00
#define PCI_IO_RANGE_TYPE_32 0x01
-#define PCI_IO_RANGE_MASK (~0x0fUL)
+#define PCI_IO_RANGE_MASK (~0x0fUL) /* Standard 4K I/O windows */
+#define PCI_IO_1K_RANGE_MASK (~0x03UL) /* Intel 1K I/O windows */
#define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */
#define PCI_MEMORY_BASE 0x20 /* Memory range behind */
#define PCI_MEMORY_LIMIT 0x22
@@ -203,16 +205,18 @@
#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */
#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */
#define PCI_CAP_ID_HT 0x08 /* HyperTransport */
-#define PCI_CAP_ID_VNDR 0x09 /* Vendor specific */
+#define PCI_CAP_ID_VNDR 0x09 /* Vendor-Specific */
#define PCI_CAP_ID_DBG 0x0A /* Debug port */
#define PCI_CAP_ID_CCRC 0x0B /* CompactPCI Central Resource Control */
-#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */
+#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */
#define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */
#define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */
-#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
+#define PCI_CAP_ID_SECDEV 0x0F /* Secure Device */
+#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */
-#define PCI_CAP_ID_SATA 0x12 /* Serial ATA */
+#define PCI_CAP_ID_SATA 0x12 /* SATA Data/Index Conf. */
#define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */
+#define PCI_CAP_ID_MAX PCI_CAP_ID_AF
#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */
#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */
#define PCI_CAP_SIZEOF 4
@@ -264,8 +268,8 @@
#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */
#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */
#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */
-#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */
-#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */
+#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */
+#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */
#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */
#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */
#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */
@@ -277,6 +281,7 @@
#define PCI_VPD_ADDR_MASK 0x7fff /* Address mask */
#define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */
#define PCI_VPD_DATA 4 /* 32-bits of data returned here */
+#define PCI_CAP_VPD_SIZEOF 8
/* Slot Identification */
@@ -287,30 +292,36 @@
/* Message Signalled Interrupts registers */
-#define PCI_MSI_FLAGS 2 /* Various flags */
-#define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */
-#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */
-#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */
-#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */
-#define PCI_MSI_FLAGS_MASKBIT 0x100 /* 64-bit mask bits allowed */
+#define PCI_MSI_FLAGS 2 /* Message Control */
+#define PCI_MSI_FLAGS_ENABLE 0x0001 /* MSI feature enabled */
+#define PCI_MSI_FLAGS_QMASK 0x000e /* Maximum queue size available */
+#define PCI_MSI_FLAGS_QSIZE 0x0070 /* Message queue size configured */
+#define PCI_MSI_FLAGS_64BIT 0x0080 /* 64-bit addresses allowed */
+#define PCI_MSI_FLAGS_MASKBIT 0x0100 /* Per-vector masking capable */
#define PCI_MSI_RFU 3 /* Rest of capability flags */
#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */
#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */
#define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */
+#define PCI_MSI_PENDING_32 16 /* Pending intrs for 32-bit devices */
#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */
#define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */
+#define PCI_MSI_PENDING_64 20 /* Pending intrs for 64-bit devices */
/* MSI-X registers */
-#define PCI_MSIX_FLAGS 2
-#define PCI_MSIX_FLAGS_QSIZE 0x7FF
-#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
-#define PCI_MSIX_FLAGS_MASKALL (1 << 14)
-#define PCI_MSIX_TABLE 4
-#define PCI_MSIX_PBA 8
-#define PCI_MSIX_FLAGS_BIRMASK (7 << 0)
-
-/* MSI-X entry's format */
+#define PCI_MSIX_FLAGS 2 /* Message Control */
+#define PCI_MSIX_FLAGS_QSIZE 0x07FF /* Table size */
+#define PCI_MSIX_FLAGS_MASKALL 0x4000 /* Mask all vectors for this function */
+#define PCI_MSIX_FLAGS_ENABLE 0x8000 /* MSI-X enable */
+#define PCI_MSIX_TABLE 4 /* Table offset */
+#define PCI_MSIX_TABLE_BIR 0x00000007 /* BAR index */
+#define PCI_MSIX_TABLE_OFFSET 0xfffffff8 /* Offset into specified BAR */
+#define PCI_MSIX_PBA 8 /* Pending Bit Array offset */
+#define PCI_MSIX_PBA_BIR 0x00000007 /* BAR index */
+#define PCI_MSIX_PBA_OFFSET 0xfffffff8 /* Offset into specified BAR */
+#define PCI_CAP_MSIX_SIZEOF 12 /* size of MSIX registers */
+
+/* MSI-X Table entry format */
#define PCI_MSIX_ENTRY_SIZE 16
#define PCI_MSIX_ENTRY_LOWER_ADDR 0
#define PCI_MSIX_ENTRY_UPPER_ADDR 4
@@ -339,8 +350,9 @@
#define PCI_AF_CTRL_FLR 0x01
#define PCI_AF_STATUS 5
#define PCI_AF_STATUS_TP 0x01
+#define PCI_CAP_AF_SIZEOF 6 /* size of AF registers */
-/* PCI-X registers */
+/* PCI-X registers (Type 0 (non-bridge) devices) */
#define PCI_X_CMD 2 /* Modes & Features */
#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */
@@ -360,7 +372,7 @@
#define PCI_X_CMD_SPLIT_16 0x0060 /* Max 16 */
#define PCI_X_CMD_SPLIT_32 0x0070 /* Max 32 */
#define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max Outstanding Split Transactions */
-#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */
+#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */
#define PCI_X_STATUS 4 /* PCI-X capabilities */
#define PCI_X_STATUS_DEVFN 0x000000ff /* A copy of devfn */
#define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of bus nr */
@@ -375,11 +387,28 @@
#define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */
#define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */
#define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */
+#define PCI_X_ECC_CSR 8 /* ECC control and status */
+#define PCI_CAP_PCIX_SIZEOF_V0 8 /* size of registers for Version 0 */
+#define PCI_CAP_PCIX_SIZEOF_V1 24 /* size for Version 1 */
+#define PCI_CAP_PCIX_SIZEOF_V2 PCI_CAP_PCIX_SIZEOF_V1 /* Same for v2 */
+
+/* PCI-X registers (Type 1 (bridge) devices) */
+
+#define PCI_X_BRIDGE_SSTATUS 2 /* Secondary Status */
+#define PCI_X_SSTATUS_64BIT 0x0001 /* Secondary AD interface is 64 bits */
+#define PCI_X_SSTATUS_133MHZ 0x0002 /* 133 MHz capable */
+#define PCI_X_SSTATUS_FREQ 0x03c0 /* Secondary Bus Mode and Frequency */
+#define PCI_X_SSTATUS_VERS 0x3000 /* PCI-X Capability Version */
+#define PCI_X_SSTATUS_V1 0x1000 /* Mode 2, not Mode 1 */
+#define PCI_X_SSTATUS_V2 0x2000 /* Mode 1 or Modes 1 and 2 */
+#define PCI_X_SSTATUS_266MHZ 0x4000 /* 266 MHz capable */
+#define PCI_X_SSTATUS_533MHZ 0x8000 /* 533 MHz capable */
+#define PCI_X_BRIDGE_STATUS 4 /* Bridge Status */
/* PCI Bridge Subsystem ID registers */
-#define PCI_SSVID_VENDOR_ID 4 /* PCI-Bridge subsystem vendor id register */
-#define PCI_SSVID_DEVICE_ID 6 /* PCI-Bridge subsystem device id register */
+#define PCI_SSVID_VENDOR_ID 4 /* PCI Bridge subsystem vendor ID */
+#define PCI_SSVID_DEVICE_ID 6 /* PCI Bridge subsystem device ID */
/* PCI Express capability registers */
@@ -391,24 +420,24 @@
#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */
#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */
#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */
-#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */
-#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIE Bridge */
+#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCIe to PCI/PCI-X Bridge */
+#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIe Bridge */
#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */
-#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */
+#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */
#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */
#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */
#define PCI_EXP_DEVCAP 4 /* Device capabilities */
-#define PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */
-#define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */
-#define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */
-#define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */
-#define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */
-#define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */
-#define PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */
-#define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */
-#define PCI_EXP_DEVCAP_RBER 0x8000 /* Role-Based Error Reporting */
-#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */
-#define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */
+#define PCI_EXP_DEVCAP_PAYLOAD 0x00000007 /* Max_Payload_Size */
+#define PCI_EXP_DEVCAP_PHANTOM 0x00000018 /* Phantom functions */
+#define PCI_EXP_DEVCAP_EXT_TAG 0x00000020 /* Extended tags */
+#define PCI_EXP_DEVCAP_L0S 0x000001c0 /* L0s Acceptable Latency */
+#define PCI_EXP_DEVCAP_L1 0x00000e00 /* L1 Acceptable Latency */
+#define PCI_EXP_DEVCAP_ATN_BUT 0x00001000 /* Attention Button Present */
+#define PCI_EXP_DEVCAP_ATN_IND 0x00002000 /* Attention Indicator Present */
+#define PCI_EXP_DEVCAP_PWR_IND 0x00004000 /* Power Indicator Present */
+#define PCI_EXP_DEVCAP_RBER 0x00008000 /* Role-Based Error Reporting */
+#define PCI_EXP_DEVCAP_PWR_VAL 0x03fc0000 /* Slot Power Limit Value */
+#define PCI_EXP_DEVCAP_PWR_SCL 0x0c000000 /* Slot Power Limit Scale */
#define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */
#define PCI_EXP_DEVCTL 8 /* Device Control */
#define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */
@@ -424,45 +453,55 @@
#define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */
#define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */
#define PCI_EXP_DEVSTA 10 /* Device Status */
-#define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */
-#define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */
-#define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */
-#define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */
-#define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */
-#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */
+#define PCI_EXP_DEVSTA_CED 0x0001 /* Correctable Error Detected */
+#define PCI_EXP_DEVSTA_NFED 0x0002 /* Non-Fatal Error Detected */
+#define PCI_EXP_DEVSTA_FED 0x0004 /* Fatal Error Detected */
+#define PCI_EXP_DEVSTA_URD 0x0008 /* Unsupported Request Detected */
+#define PCI_EXP_DEVSTA_AUXPD 0x0010 /* AUX Power Detected */
+#define PCI_EXP_DEVSTA_TRPND 0x0020 /* Transactions Pending */
#define PCI_EXP_LNKCAP 12 /* Link Capabilities */
#define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */
+#define PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS Vector bit 0 */
+#define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */
#define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */
#define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */
#define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */
#define PCI_EXP_LNKCAP_L1EL 0x00038000 /* L1 Exit Latency */
-#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* L1 Clock Power Management */
+#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* Clock Power Management */
#define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Surprise Down Error Reporting Capable */
#define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */
#define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */
#define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */
#define PCI_EXP_LNKCTL 16 /* Link Control */
#define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */
+#define PCI_EXP_LNKCTL_ASPM_L0S 0x0001 /* L0s Enable */
+#define PCI_EXP_LNKCTL_ASPM_L1 0x0002 /* L1 Enable */
#define PCI_EXP_LNKCTL_RCB 0x0008 /* Read Completion Boundary */
#define PCI_EXP_LNKCTL_LD 0x0010 /* Link Disable */
#define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link */
#define PCI_EXP_LNKCTL_CCC 0x0040 /* Common Clock Configuration */
#define PCI_EXP_LNKCTL_ES 0x0080 /* Extended Synch */
-#define PCI_EXP_LNKCTL_CLKREQ_EN 0x100 /* Enable clkreq */
+#define PCI_EXP_LNKCTL_CLKREQ_EN 0x0100 /* Enable clkreq */
#define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */
#define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */
-#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Lnk Autonomous Bandwidth Interrupt Enable */
+#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Link Autonomous Bandwidth Interrupt Enable */
#define PCI_EXP_LNKSTA 18 /* Link Status */
#define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */
-#define PCI_EXP_LNKSTA_CLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */
-#define PCI_EXP_LNKSTA_CLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */
-#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated Link Width */
+#define PCI_EXP_LNKSTA_CLS_2_5GB 0x0001 /* Current Link Speed 2.5GT/s */
+#define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */
+#define PCI_EXP_LNKSTA_CLS_8_0GB 0x0003 /* Current Link Speed 8.0GT/s */
+#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Negotiated Link Width */
+#define PCI_EXP_LNKSTA_NLW_X1 0x0010 /* Current Link Width x1 */
+#define PCI_EXP_LNKSTA_NLW_X2 0x0020 /* Current Link Width x2 */
+#define PCI_EXP_LNKSTA_NLW_X4 0x0040 /* Current Link Width x4 */
+#define PCI_EXP_LNKSTA_NLW_X8 0x0080 /* Current Link Width x8 */
#define PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask in link status */
#define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */
#define PCI_EXP_LNKSTA_SLC 0x1000 /* Slot Clock Configuration */
#define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */
#define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */
#define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */
+#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 20 /* v1 endpoints end here */
#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */
#define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */
#define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */
@@ -484,8 +523,16 @@
#define PCI_EXP_SLTCTL_CCIE 0x0010 /* Command Completed Interrupt Enable */
#define PCI_EXP_SLTCTL_HPIE 0x0020 /* Hot-Plug Interrupt Enable */
#define PCI_EXP_SLTCTL_AIC 0x00c0 /* Attention Indicator Control */
+#define PCI_EXP_SLTCTL_ATTN_IND_ON 0x0040 /* Attention Indicator on */
+#define PCI_EXP_SLTCTL_ATTN_IND_BLINK 0x0080 /* Attention Indicator blinking */
+#define PCI_EXP_SLTCTL_ATTN_IND_OFF 0x00c0 /* Attention Indicator off */
#define PCI_EXP_SLTCTL_PIC 0x0300 /* Power Indicator Control */
+#define PCI_EXP_SLTCTL_PWR_IND_ON 0x0100 /* Power Indicator on */
+#define PCI_EXP_SLTCTL_PWR_IND_BLINK 0x0200 /* Power Indicator blinking */
+#define PCI_EXP_SLTCTL_PWR_IND_OFF 0x0300 /* Power Indicator off */
#define PCI_EXP_SLTCTL_PCC 0x0400 /* Power Controller Control */
+#define PCI_EXP_SLTCTL_PWR_ON 0x0000 /* Power On */
+#define PCI_EXP_SLTCTL_PWR_OFF 0x0400 /* Power Off */
#define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */
#define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */
#define PCI_EXP_SLTSTA 26 /* Slot Status */
@@ -499,52 +546,93 @@
#define PCI_EXP_SLTSTA_EIS 0x0080 /* Electromechanical Interlock Status */
#define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link Layer State Changed */
#define PCI_EXP_RTCTL 28 /* Root Control */
-#define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */
-#define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */
-#define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error on Fatal Error */
-#define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt Enable */
-#define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */
+#define PCI_EXP_RTCTL_SECEE 0x0001 /* System Error on Correctable Error */
+#define PCI_EXP_RTCTL_SENFEE 0x0002 /* System Error on Non-Fatal Error */
+#define PCI_EXP_RTCTL_SEFEE 0x0004 /* System Error on Fatal Error */
+#define PCI_EXP_RTCTL_PMEIE 0x0008 /* PME Interrupt Enable */
+#define PCI_EXP_RTCTL_CRSSVE 0x0010 /* CRS Software Visibility Enable */
#define PCI_EXP_RTCAP 30 /* Root Capabilities */
#define PCI_EXP_RTSTA 32 /* Root Status */
-#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */
-#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */
+#define PCI_EXP_RTSTA_PME 0x00010000 /* PME status */
+#define PCI_EXP_RTSTA_PENDING 0x00020000 /* PME pending */
+/*
+ * The Device Capabilities 2, Device Status 2, Device Control 2,
+ * Link Capabilities 2, Link Status 2, Link Control 2,
+ * Slot Capabilities 2, Slot Status 2, and Slot Control 2 registers
+ * are only present on devices with PCIe Capability version 2.
+ * Use pcie_capability_read_word() and similar interfaces to use them
+ * safely.
+ */
#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */
-#define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */
-#define PCI_EXP_DEVCAP2_LTR 0x800 /* Latency tolerance reporting */
-#define PCI_EXP_OBFF_MASK 0xc0000 /* OBFF support mechanism */
-#define PCI_EXP_OBFF_MSG 0x40000 /* New message signaling */
-#define PCI_EXP_OBFF_WAKE 0x80000 /* Re-use WAKE# for OBFF */
+#define PCI_EXP_DEVCAP2_ARI 0x00000020 /* Alternative Routing-ID */
+#define PCI_EXP_DEVCAP2_LTR 0x00000800 /* Latency tolerance reporting */
+#define PCI_EXP_DEVCAP2_OBFF_MASK 0x000c0000 /* OBFF support mechanism */
+#define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */
+#define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use WAKE# for OBFF */
#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */
-#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */
-#define PCI_EXP_IDO_REQ_EN 0x100 /* ID-based ordering request enable */
-#define PCI_EXP_IDO_CMP_EN 0x200 /* ID-based ordering completion enable */
-#define PCI_EXP_LTR_EN 0x400 /* Latency tolerance reporting */
-#define PCI_EXP_OBFF_MSGA_EN 0x2000 /* OBFF enable with Message type A */
-#define PCI_EXP_OBFF_MSGB_EN 0x4000 /* OBFF enable with Message type B */
-#define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */
+#define PCI_EXP_DEVCTL2_COMP_TIMEOUT 0x000f /* Completion Timeout Value */
+#define PCI_EXP_DEVCTL2_ARI 0x0020 /* Alternative Routing-ID */
+#define PCI_EXP_DEVCTL2_IDO_REQ_EN 0x0100 /* Allow IDO for requests */
+#define PCI_EXP_DEVCTL2_IDO_CMP_EN 0x0200 /* Allow IDO for completions */
+#define PCI_EXP_DEVCTL2_LTR_EN 0x0400 /* Enable LTR mechanism */
+#define PCI_EXP_DEVCTL2_OBFF_MSGA_EN 0x2000 /* Enable OBFF Message type A */
+#define PCI_EXP_DEVCTL2_OBFF_MSGB_EN 0x4000 /* Enable OBFF Message type B */
+#define PCI_EXP_DEVCTL2_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */
+#define PCI_EXP_DEVSTA2 42 /* Device Status 2 */
+#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */
+#define PCI_EXP_LNKCAP2 44 /* Link Capabilities 2 */
+#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x00000002 /* Supported Speed 2.5GT/s */
+#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5.0GT/s */
+#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /* Supported Speed 8.0GT/s */
+#define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */
#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */
+#define PCI_EXP_LNKSTA2 50 /* Link Status 2 */
+#define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */
#define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */
+#define PCI_EXP_SLTSTA2 58 /* Slot Status 2 */
/* Extended Capabilities (PCI-X 2.0 and Express) */
#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff)
#define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf)
#define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc)
-#define PCI_EXT_CAP_ID_ERR 1
-#define PCI_EXT_CAP_ID_VC 2
-#define PCI_EXT_CAP_ID_DSN 3
-#define PCI_EXT_CAP_ID_PWR 4
-#define PCI_EXT_CAP_ID_VNDR 11
-#define PCI_EXT_CAP_ID_ACS 13
-#define PCI_EXT_CAP_ID_ARI 14
-#define PCI_EXT_CAP_ID_ATS 15
-#define PCI_EXT_CAP_ID_SRIOV 16
-#define PCI_EXT_CAP_ID_LTR 24
+#define PCI_EXT_CAP_ID_ERR 0x01 /* Advanced Error Reporting */
+#define PCI_EXT_CAP_ID_VC 0x02 /* Virtual Channel Capability */
+#define PCI_EXT_CAP_ID_DSN 0x03 /* Device Serial Number */
+#define PCI_EXT_CAP_ID_PWR 0x04 /* Power Budgeting */
+#define PCI_EXT_CAP_ID_RCLD 0x05 /* Root Complex Link Declaration */
+#define PCI_EXT_CAP_ID_RCILC 0x06 /* Root Complex Internal Link Control */
+#define PCI_EXT_CAP_ID_RCEC 0x07 /* Root Complex Event Collector */
+#define PCI_EXT_CAP_ID_MFVC 0x08 /* Multi-Function VC Capability */
+#define PCI_EXT_CAP_ID_VC9 0x09 /* same as _VC */
+#define PCI_EXT_CAP_ID_RCRB 0x0A /* Root Complex RB? */
+#define PCI_EXT_CAP_ID_VNDR 0x0B /* Vendor-Specific */
+#define PCI_EXT_CAP_ID_CAC 0x0C /* Config Access - obsolete */
+#define PCI_EXT_CAP_ID_ACS 0x0D /* Access Control Services */
+#define PCI_EXT_CAP_ID_ARI 0x0E /* Alternate Routing ID */
+#define PCI_EXT_CAP_ID_ATS 0x0F /* Address Translation Services */
+#define PCI_EXT_CAP_ID_SRIOV 0x10 /* Single Root I/O Virtualization */
+#define PCI_EXT_CAP_ID_MRIOV 0x11 /* Multi Root I/O Virtualization */
+#define PCI_EXT_CAP_ID_MCAST 0x12 /* Multicast */
+#define PCI_EXT_CAP_ID_PRI 0x13 /* Page Request Interface */
+#define PCI_EXT_CAP_ID_AMD_XXX 0x14 /* Reserved for AMD */
+#define PCI_EXT_CAP_ID_REBAR 0x15 /* Resizable BAR */
+#define PCI_EXT_CAP_ID_DPA 0x16 /* Dynamic Power Allocation */
+#define PCI_EXT_CAP_ID_TPH 0x17 /* TPH Requester */
+#define PCI_EXT_CAP_ID_LTR 0x18 /* Latency Tolerance Reporting */
+#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe Capability */
+#define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */
+#define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */
+#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PASID
+
+#define PCI_EXT_CAP_DSN_SIZEOF 12
+#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40
/* Advanced Error Reporting */
#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */
#define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */
#define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */
+#define PCI_ERR_UNC_SURPDN 0x00000020 /* Surprise Down */
#define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */
#define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */
#define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */
@@ -554,6 +642,11 @@
#define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */
#define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */
#define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */
+#define PCI_ERR_UNC_ACSV 0x00200000 /* ACS Violation */
+#define PCI_ERR_UNC_INTN 0x00400000 /* internal error */
+#define PCI_ERR_UNC_MCBTLP 0x00800000 /* MC blocked TLP */
+#define PCI_ERR_UNC_ATOMEG 0x01000000 /* Atomic egress blocked */
+#define PCI_ERR_UNC_TLPPRE 0x02000000 /* TLP prefix blocked */
#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */
/* Same bits as above */
#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */
@@ -564,6 +657,9 @@
#define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */
#define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */
#define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */
+#define PCI_ERR_COR_ADV_NFAT 0x00002000 /* Advisory Non-Fatal */
+#define PCI_ERR_COR_INTERNAL 0x00004000 /* Corrected Internal */
+#define PCI_ERR_COR_LOG_OVER 0x00008000 /* Header Log Overflow */
#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */
/* Same bits as above */
#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */
@@ -584,9 +680,9 @@
#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */
/* Multi ERR_COR Received */
#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002
-/* ERR_FATAL/NONFATAL Recevied */
+/* ERR_FATAL/NONFATAL Received */
#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004
-/* Multi ERR_FATAL/NONFATAL Recevied */
+/* Multi ERR_FATAL/NONFATAL Received */
#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008
#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First Fatal */
#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */
@@ -594,13 +690,36 @@
#define PCI_ERR_ROOT_ERR_SRC 52 /* Error Source Identification */
/* Virtual Channel */
-#define PCI_VC_PORT_REG1 4
-#define PCI_VC_PORT_REG2 8
+#define PCI_VC_PORT_CAP1 4
+#define PCI_VC_CAP1_EVCC 0x00000007 /* extended VC count */
+#define PCI_VC_CAP1_LPEVCC 0x00000070 /* low prio extended VC count */
+#define PCI_VC_CAP1_ARB_SIZE 0x00000c00
+#define PCI_VC_PORT_CAP2 8
+#define PCI_VC_CAP2_32_PHASE 0x00000002
+#define PCI_VC_CAP2_64_PHASE 0x00000004
+#define PCI_VC_CAP2_128_PHASE 0x00000008
+#define PCI_VC_CAP2_ARB_OFF 0xff000000
#define PCI_VC_PORT_CTRL 12
+#define PCI_VC_PORT_CTRL_LOAD_TABLE 0x00000001
#define PCI_VC_PORT_STATUS 14
+#define PCI_VC_PORT_STATUS_TABLE 0x00000001
#define PCI_VC_RES_CAP 16
+#define PCI_VC_RES_CAP_32_PHASE 0x00000002
+#define PCI_VC_RES_CAP_64_PHASE 0x00000004
+#define PCI_VC_RES_CAP_128_PHASE 0x00000008
+#define PCI_VC_RES_CAP_128_PHASE_TB 0x00000010
+#define PCI_VC_RES_CAP_256_PHASE 0x00000020
+#define PCI_VC_RES_CAP_ARB_OFF 0xff000000
#define PCI_VC_RES_CTRL 20
+#define PCI_VC_RES_CTRL_LOAD_TABLE 0x00010000
+#define PCI_VC_RES_CTRL_ARB_SELECT 0x000e0000
+#define PCI_VC_RES_CTRL_ID 0x07000000
+#define PCI_VC_RES_CTRL_ENABLE 0x80000000
#define PCI_VC_RES_STATUS 26
+#define PCI_VC_RES_STATUS_TABLE 0x00000001
+#define PCI_VC_RES_STATUS_NEGO 0x00000002
+#define PCI_CAP_VC_BASE_SIZEOF 0x10
+#define PCI_CAP_VC_PER_VC_SIZEOF 0x0C
/* Power Budgeting */
#define PCI_PWR_DSR 4 /* Data Select Register */
@@ -613,9 +732,16 @@
#define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */
#define PCI_PWR_CAP 12 /* Capability */
#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */
+#define PCI_EXT_CAP_PWR_SIZEOF 16
+
+/* Vendor-Specific (VSEC, PCI_EXT_CAP_ID_VNDR) */
+#define PCI_VNDR_HEADER 4 /* Vendor-Specific Header */
+#define PCI_VNDR_HEADER_ID(x) ((x) & 0xffff)
+#define PCI_VNDR_HEADER_REV(x) (((x) >> 16) & 0xf)
+#define PCI_VNDR_HEADER_LEN(x) (((x) >> 20) & 0xfff)
/*
- * Hypertransport sub capability types
+ * HyperTransport sub capability types
*
* Unfortunately there are both 3 bit and 5 bit capability types defined
* in the HT spec, catering for that is a little messy. You probably don't
@@ -643,8 +769,10 @@
#define HT_CAPTYPE_DIRECT_ROUTE 0xB0 /* Direct routing configuration */
#define HT_CAPTYPE_VCSET 0xB8 /* Virtual Channel configuration */
#define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */
-#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 hypertransport configuration */
-#define HT_CAPTYPE_PM 0xE0 /* Hypertransport powermanagement configuration */
+#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 HyperTransport configuration */
+#define HT_CAPTYPE_PM 0xE0 /* HyperTransport power management configuration */
+#define HT_CAP_SIZEOF_LONG 28 /* slave & primary */
+#define HT_CAP_SIZEOF_SHORT 24 /* host & secondary */
/* Alternative Routing-ID Interpretation */
#define PCI_ARI_CAP 0x04 /* ARI Capability Register */
@@ -655,6 +783,7 @@
#define PCI_ARI_CTRL_MFVC 0x0001 /* MFVC Function Groups Enable */
#define PCI_ARI_CTRL_ACS 0x0002 /* ACS Function Groups Enable */
#define PCI_ARI_CTRL_FG(x) (((x) >> 4) & 7) /* Function Group */
+#define PCI_EXT_CAP_ARI_SIZEOF 8
/* Address Translation Service */
#define PCI_ATS_CAP 0x04 /* ATS Capability Register */
@@ -664,6 +793,29 @@
#define PCI_ATS_CTRL_ENABLE 0x8000 /* ATS Enable */
#define PCI_ATS_CTRL_STU(x) ((x) & 0x1f) /* Smallest Translation Unit */
#define PCI_ATS_MIN_STU 12 /* shift of minimum STU block */
+#define PCI_EXT_CAP_ATS_SIZEOF 8
+
+/* Page Request Interface */
+#define PCI_PRI_CTRL 0x04 /* PRI control register */
+#define PCI_PRI_CTRL_ENABLE 0x01 /* Enable */
+#define PCI_PRI_CTRL_RESET 0x02 /* Reset */
+#define PCI_PRI_STATUS 0x06 /* PRI status register */
+#define PCI_PRI_STATUS_RF 0x001 /* Response Failure */
+#define PCI_PRI_STATUS_UPRGI 0x002 /* Unexpected PRG index */
+#define PCI_PRI_STATUS_STOPPED 0x100 /* PRI Stopped */
+#define PCI_PRI_MAX_REQ 0x08 /* PRI max reqs supported */
+#define PCI_PRI_ALLOC_REQ 0x0c /* PRI max reqs allowed */
+#define PCI_EXT_CAP_PRI_SIZEOF 16
+
+/* Process Address Space ID */
+#define PCI_PASID_CAP 0x04 /* PASID feature register */
+#define PCI_PASID_CAP_EXEC 0x02 /* Exec permissions Supported */
+#define PCI_PASID_CAP_PRIV 0x04 /* Privilege Mode Supported */
+#define PCI_PASID_CTRL 0x06 /* PASID control register */
+#define PCI_PASID_CTRL_ENABLE 0x01 /* Enable bit */
+#define PCI_PASID_CTRL_EXEC 0x02 /* Exec permissions Enable */
+#define PCI_PASID_CTRL_PRIV 0x04 /* Privilege Mode Enable */
+#define PCI_EXT_CAP_PASID_SIZEOF 8
/* Single Root I/O Virtualization */
#define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */
@@ -695,12 +847,14 @@
#define PCI_SRIOV_VFM_MI 0x1 /* Dormant.MigrateIn */
#define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */
#define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */
+#define PCI_EXT_CAP_SRIOV_SIZEOF 64
#define PCI_LTR_MAX_SNOOP_LAT 0x4
#define PCI_LTR_MAX_NOSNOOP_LAT 0x6
#define PCI_LTR_VALUE_MASK 0x000003ff
#define PCI_LTR_SCALE_MASK 0x00001c00
#define PCI_LTR_SCALE_SHIFT 10
+#define PCI_EXT_CAP_LTR_SIZEOF 8
/* Access Control Service */
#define PCI_ACS_CAP 0x04 /* ACS Capability Register */
@@ -711,7 +865,38 @@
#define PCI_ACS_UF 0x10 /* Upstream Forwarding */
#define PCI_ACS_EC 0x20 /* P2P Egress Control */
#define PCI_ACS_DT 0x40 /* Direct Translated P2P */
+#define PCI_ACS_EGRESS_BITS 0x05 /* ACS Egress Control Vector Size */
#define PCI_ACS_CTRL 0x06 /* ACS Control Register */
#define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */
+#define PCI_VSEC_HDR 4 /* extended cap - vendor-specific */
+#define PCI_VSEC_HDR_LEN_SHIFT 20 /* shift for length field */
+
+/* SATA capability */
+#define PCI_SATA_REGS 4 /* SATA REGs specifier */
+#define PCI_SATA_REGS_MASK 0xF /* location - BAR#/inline */
+#define PCI_SATA_REGS_INLINE 0xF /* REGS in config space */
+#define PCI_SATA_SIZEOF_SHORT 8
+#define PCI_SATA_SIZEOF_LONG 16
+
+/* Resizable BARs */
+#define PCI_REBAR_CTRL 8 /* control register */
+#define PCI_REBAR_CTRL_NBAR_MASK (7 << 5) /* mask for # bars */
+#define PCI_REBAR_CTRL_NBAR_SHIFT 5 /* shift for # bars */
+
+/* Dynamic Power Allocation */
+#define PCI_DPA_CAP 4 /* capability register */
+#define PCI_DPA_CAP_SUBSTATE_MASK 0x1F /* # substates - 1 */
+#define PCI_DPA_BASE_SIZEOF 16 /* size with 0 substates */
+
+/* TPH Requester */
+#define PCI_TPH_CAP 4 /* capability register */
+#define PCI_TPH_CAP_LOC_MASK 0x600 /* location mask */
+#define PCI_TPH_LOC_NONE 0x000 /* no location */
+#define PCI_TPH_LOC_CAP 0x200 /* in capability */
+#define PCI_TPH_LOC_MSIX 0x400 /* in MSI-X */
+#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* st table mask */
+#define PCI_TPH_CAP_ST_SHIFT 16 /* st table shift */
+#define PCI_TPH_BASE_SIZEOF 12 /* size with no st table */
+
#endif /* LINUX_PCI_REGS_H */
--
1.9.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* [Qemu-devel] [PATCH v2 4/4] pcie: Add support for Single Root I/O Virtualization (SR/IOV)
2014-09-02 11:00 [Qemu-devel] [PATCH v2 0/4] pcie: Add support for Single Root I/O Virtualization Knut Omang
` (2 preceding siblings ...)
2014-09-02 11:00 ` [Qemu-devel] [PATCH v2 3/4] pci: Update pci_regs header Knut Omang
@ 2014-09-02 11:00 ` Knut Omang
3 siblings, 0 replies; 10+ messages in thread
From: Knut Omang @ 2014-09-02 11:00 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Peter Crosthwaite, Stefan Hajnoczi,
Michael S. Tsirkin, Laszlo Ersek, Gabriel Somlo, Knut Omang,
Alexander Graf, Fabien Chouteau, Luiz Capitulino,
Beniamino Galvani, Alex Williamson, Gonglei (Arei), Jan Kiszka,
Anthony Liguori, Paolo Bonzini, Amos Kong
This patch provides the building blocks for creating an SR/IOV
PCIe Extended Capability header and register/unregister
SR/IOV Virtual Functions.
Signed-off-by: Knut Omang <knut.omang@oracle.com>
---
hw/pci/Makefile.objs | 2 +-
hw/pci/pci.c | 97 ++++++++++++----
hw/pci/pcie.c | 9 +-
hw/pci/pcie_sriov.c | 267 ++++++++++++++++++++++++++++++++++++++++++++
include/hw/pci/pci.h | 11 +-
include/hw/pci/pcie.h | 6 +
include/hw/pci/pcie_sriov.h | 55 +++++++++
include/qemu/typedefs.h | 2 +
8 files changed, 418 insertions(+), 31 deletions(-)
create mode 100644 hw/pci/pcie_sriov.c
create mode 100644 include/hw/pci/pcie_sriov.h
diff --git a/hw/pci/Makefile.objs b/hw/pci/Makefile.objs
index 80f8aa6..4ed4205 100644
--- a/hw/pci/Makefile.objs
+++ b/hw/pci/Makefile.objs
@@ -3,7 +3,7 @@ common-obj-$(CONFIG_PCI) += msix.o msi.o
common-obj-$(CONFIG_PCI) += shpc.o
common-obj-$(CONFIG_PCI) += slotid_cap.o
common-obj-$(CONFIG_PCI) += pci_host.o pcie_host.o
-common-obj-$(CONFIG_PCI) += pcie.o pcie_aer.o pcie_port.o
+common-obj-$(CONFIG_PCI) += pcie.o pcie_aer.o pcie_port.o pcie_sriov.o
common-obj-$(call lnot,$(CONFIG_PCI)) += pci-stub.o
common-obj-$(CONFIG_ALL) += pci-stub.o
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index af547dc..c8335b7 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -35,7 +35,6 @@
#include "hw/pci/msi.h"
#include "hw/pci/msix.h"
#include "exec/address-spaces.h"
-#include "hw/hotplug.h"
//#define DEBUG_PCI
#ifdef DEBUG_PCI
@@ -126,6 +125,9 @@ static int pci_bar(PCIDevice *d, int reg)
{
uint8_t type;
+ /* PCIe virtual functions do not have their own BARs */
+ assert(!pci_is_vf(d));
+
if (reg != PCI_ROM_SLOT)
return PCI_BASE_ADDRESS_0 + reg * 4;
@@ -184,22 +186,13 @@ void pci_device_deassert_intx(PCIDevice *dev)
}
}
-static void pci_do_device_reset(PCIDevice *dev)
+static void pci_reset_regions(PCIDevice *dev)
{
int r;
+ if (pci_is_vf(dev)) {
+ return;
+ }
- pci_device_deassert_intx(dev);
- assert(dev->irq_state == 0);
-
- /* Clear all writable bits */
- pci_word_test_and_clear_mask(dev->config + PCI_COMMAND,
- pci_get_word(dev->wmask + PCI_COMMAND) |
- pci_get_word(dev->w1cmask + PCI_COMMAND));
- pci_word_test_and_clear_mask(dev->config + PCI_STATUS,
- pci_get_word(dev->wmask + PCI_STATUS) |
- pci_get_word(dev->w1cmask + PCI_STATUS));
- dev->config[PCI_CACHE_LINE_SIZE] = 0x0;
- dev->config[PCI_INTERRUPT_LINE] = 0x0;
for (r = 0; r < PCI_NUM_REGIONS; ++r) {
PCIIORegion *region = &dev->io_regions[r];
if (!region->size) {
@@ -213,6 +206,27 @@ static void pci_do_device_reset(PCIDevice *dev)
pci_set_long(dev->config + pci_bar(dev, r), region->type);
}
}
+}
+
+static void pci_do_device_reset(PCIDevice *dev)
+{
+ qdev_reset_all(&dev->qdev);
+
+ dev->irq_state = 0;
+ pci_update_irq_status(dev);
+ pci_device_deassert_intx(dev);
+ assert(dev->irq_state == 0);
+
+ /* Clear all writable bits */
+ pci_word_test_and_clear_mask(dev->config + PCI_COMMAND,
+ pci_get_word(dev->wmask + PCI_COMMAND) |
+ pci_get_word(dev->w1cmask + PCI_COMMAND));
+ pci_word_test_and_clear_mask(dev->config + PCI_STATUS,
+ pci_get_word(dev->wmask + PCI_STATUS) |
+ pci_get_word(dev->w1cmask + PCI_STATUS));
+ dev->config[PCI_CACHE_LINE_SIZE] = 0x0;
+ dev->config[PCI_INTERRUPT_LINE] = 0x0;
+ pci_reset_regions(dev);
pci_update_mappings(dev);
msi_reset(dev);
@@ -734,6 +748,15 @@ static int pci_init_multifunction(PCIBus *bus, PCIDevice *dev)
dev->config[PCI_HEADER_TYPE] |= PCI_HEADER_TYPE_MULTI_FUNCTION;
}
+ /* With SR/IOV and ARI, a device at function 0 need not be a multifunction
+ * device, as it may just be a VF that ended up with function 0 in
+ * the legacy PCI interpretation. Avoid failing in such cases:
+ */
+ if (pci_is_vf(dev) &&
+ dev->exp.sriov_vf.pf->cap_present & QEMU_PCI_CAP_MULTIFUNCTION) {
+ return 0;
+ }
+
/*
* multifunction bit is interpreted in two ways as follows.
* - all functions must set the bit to 1.
@@ -920,6 +943,7 @@ void pci_register_bar(PCIDevice *pci_dev, int region_num,
uint64_t wmask;
pcibus_t size = memory_region_size(memory);
+ assert(!pci_is_vf(pci_dev)); /* VFs must use pcie_register_vf_bar */
assert(region_num >= 0);
assert(region_num < PCI_NUM_REGIONS);
if (size & (size-1)) {
@@ -1018,18 +1042,47 @@ pcibus_t pci_get_bar_addr(PCIDevice *pci_dev, int region_num)
return pci_dev->io_regions[region_num].addr;
}
-static pcibus_t pci_bar_address(PCIDevice *d,
- int reg, uint8_t type, pcibus_t size)
+
+static pcibus_t pci_config_get_bar_addr(PCIDevice *d, int reg,
+ uint8_t type, pcibus_t size)
+{
+ pcibus_t new_addr;
+ if (!pci_is_vf(d)) {
+ int bar = pci_bar(d, reg);
+ if (type & PCI_BASE_ADDRESS_MEM_TYPE_64) {
+ new_addr = pci_get_quad(d->config + bar);
+ } else {
+ new_addr = pci_get_long(d->config + bar);
+ }
+ } else {
+ PCIDevice *pf = d->exp.sriov_vf.pf;
+ int bar = pf->exp.sriov_cap + PCI_SRIOV_BAR + reg * 4;
+ uint32_t vf_num = d->devfn - (pf->devfn + 1);
+ if (type & PCI_BASE_ADDRESS_MEM_TYPE_64) {
+ new_addr = pci_get_quad(pf->config + bar);
+ } else {
+ new_addr = pci_get_long(pf->config + bar);
+ }
+ new_addr += vf_num * size;
+ }
+ if (reg != PCI_ROM_SLOT) {
+ /* Preserve the rom enable bit */
+ new_addr &= ~(size - 1);
+ }
+ return new_addr;
+}
+
+pcibus_t pci_bar_address(PCIDevice *d,
+ int reg, uint8_t type, pcibus_t size)
{
pcibus_t new_addr, last_addr;
- int bar = pci_bar(d, reg);
uint16_t cmd = pci_get_word(d->config + PCI_COMMAND);
if (type & PCI_BASE_ADDRESS_SPACE_IO) {
if (!(cmd & PCI_COMMAND_IO)) {
return PCI_BAR_UNMAPPED;
}
- new_addr = pci_get_long(d->config + bar) & ~(size - 1);
+ new_addr = pci_config_get_bar_addr(d, reg, type, size);
last_addr = new_addr + size - 1;
/* Check if 32 bit BAR wraps around explicitly.
* TODO: make priorities correct and remove this work around.
@@ -1043,11 +1096,7 @@ static pcibus_t pci_bar_address(PCIDevice *d,
if (!(cmd & PCI_COMMAND_MEMORY)) {
return PCI_BAR_UNMAPPED;
}
- if (type & PCI_BASE_ADDRESS_MEM_TYPE_64) {
- new_addr = pci_get_quad(d->config + bar);
- } else {
- new_addr = pci_get_long(d->config + bar);
- }
+ new_addr = pci_config_get_bar_addr(d, reg, type, size);
/* the ROM slot has a specific enable bit */
if (reg == PCI_ROM_SLOT && !(new_addr & PCI_ROM_ADDRESS_ENABLE)) {
return PCI_BAR_UNMAPPED;
@@ -1173,6 +1222,7 @@ void pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t val_in, int
msi_write_config(d, addr, val_in, l);
msix_write_config(d, addr, val_in, l);
+ pcie_sriov_config_write(d, addr, val_in, l);
}
/***********************************************************/
@@ -1777,7 +1827,6 @@ static int pci_qdev_init(DeviceState *qdev)
is_default_rom = true;
}
pci_add_option_rom(pci_dev, is_default_rom);
-
return 0;
}
diff --git a/hw/pci/pcie.c b/hw/pci/pcie.c
index 1babddf..a2ac110 100644
--- a/hw/pci/pcie.c
+++ b/hw/pci/pcie.c
@@ -254,7 +254,7 @@ void pcie_cap_slot_hotplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
* Right now, only a device of function = 0 is allowed to be
* hot plugged/unplugged.
*/
- assert(PCI_FUNC(pci_dev->devfn) == 0);
+ assert(PCI_FUNC(pci_dev->devfn) == 0 || pci_is_vf(pci_dev));
pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA,
PCI_EXP_SLTSTA_PDS);
@@ -266,10 +266,11 @@ void pcie_cap_slot_hot_unplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
Error **errp)
{
uint8_t *exp_cap;
+ PCIDevice *pdev = PCI_DEVICE(hotplug_dev);
- pcie_cap_slot_hotplug_common(PCI_DEVICE(hotplug_dev), dev, &exp_cap, errp);
+ pcie_cap_slot_hotplug_common(pdev, dev, &exp_cap, errp);
- pcie_cap_slot_push_attention_button(PCI_DEVICE(hotplug_dev));
+ pcie_cap_slot_push_attention_button(pdev);
}
/* pci express slot for pci express root/downstream port
@@ -409,7 +410,7 @@ void pcie_cap_slot_write_config(PCIDevice *dev,
}
/*
- * If the slot is polulated, power indicator is off and power
+ * If the slot is populated, power indicator is off and power
* controller is off, it is safe to detach the devices.
*/
if ((sltsta & PCI_EXP_SLTSTA_PDS) && (val & PCI_EXP_SLTCTL_PCC) &&
diff --git a/hw/pci/pcie_sriov.c b/hw/pci/pcie_sriov.c
new file mode 100644
index 0000000..2393c69
--- /dev/null
+++ b/hw/pci/pcie_sriov.c
@@ -0,0 +1,267 @@
+/*
+ * pcie_sriov.c:
+ *
+ * Implementation of SR/IOV emulation support.
+ *
+ * Copyright (c) 2014 Knut Omang <knut.omang@oracle.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "hw/pci/pci.h"
+#include "hw/pci/pcie.h"
+#include "hw/pci/pci_bus.h"
+#include "qemu/range.h"
+
+//#define DEBUG_SRIOV
+#ifdef DEBUG_SRIOV
+# define SRIOV_DPRINTF(fmt, ...) \
+ fprintf(stderr, "%s:%d " fmt, __func__, __LINE__, ## __VA_ARGS__)
+#else
+# define SRIOV_DPRINTF(fmt, ...) do {} while (0)
+#endif
+#define SRIOV_DEV_PRINTF(dev, fmt, ...) \
+ SRIOV_DPRINTF("%s:%x "fmt, (dev)->name, (dev)->devfn, ## __VA_ARGS__)
+
+static PCIDevice *register_vf(PCIDevice *pf, int devfn, const char *name);
+static void unregister_vfs(PCIDevice *dev);
+
+void pcie_sriov_pf_init(PCIDevice *dev, uint16_t offset,
+ const char *vfname, uint16_t vf_dev_id,
+ uint16_t init_vfs, uint16_t total_vfs,
+ uint16_t vf_offset, uint16_t vf_stride)
+{
+ uint8_t *cfg = dev->config + offset;
+ uint8_t *wmask;
+
+ pcie_add_capability(dev, PCI_EXT_CAP_ID_SRIOV, 1,
+ offset, PCI_EXT_CAP_SRIOV_SIZEOF);
+ dev->exp.sriov_cap = offset;
+ dev->exp.sriov_pf.num_vfs = 0;
+ dev->exp.sriov_pf.vfname = g_strdup(vfname);
+ dev->exp.sriov_pf.vf = NULL;
+
+ pci_set_word(cfg + PCI_SRIOV_VF_OFFSET, vf_offset);
+ pci_set_word(cfg + PCI_SRIOV_VF_STRIDE, vf_stride);
+
+ /* Minimal page size support values required by the SR/IOV standard:
+ * 0x553 << 12 = 0x553000 = 4K + 8K + 64K + 256K + 1M + 4M
+ * Hard coded for simplicity in this version
+ */
+ pci_set_word(cfg + PCI_SRIOV_SUP_PGSIZE, 0x553);
+
+ /* Default is to use 4K pages, software can modify it
+ * to any of the supported bits
+ */
+ pci_set_word(cfg + PCI_SRIOV_SYS_PGSIZE, 0x1);
+
+ /* Set up device ID and initial/total number of VFs available */
+ pci_set_word(cfg + PCI_SRIOV_VF_DID, vf_dev_id);
+ pci_set_word(cfg + PCI_SRIOV_INITIAL_VF, init_vfs);
+ pci_set_word(cfg + PCI_SRIOV_TOTAL_VF, total_vfs);
+
+ /* Write enable control bits */
+ wmask = dev->wmask + offset;
+ pci_set_word(wmask + PCI_SRIOV_CTRL,
+ PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE | PCI_SRIOV_CTRL_ARI);
+ pci_set_word(wmask + PCI_SRIOV_NUM_VF, 0xffff);
+ pci_set_word(wmask + PCI_SRIOV_SYS_PGSIZE, 0x553);
+
+ qdev_prop_set_bit(&dev->qdev, "multifunction", true);
+}
+
+void pcie_sriov_pf_exit(PCIDevice *dev)
+{
+ SRIOV_DPRINTF("\n");
+ unregister_vfs(dev);
+ g_free((char *)dev->exp.sriov_pf.vfname);
+ dev->exp.sriov_pf.vfname = NULL;
+}
+
+void pcie_sriov_pf_init_vf_bar(PCIDevice *dev, int region_num,
+ uint8_t type, dma_addr_t size)
+{
+ uint32_t addr;
+ uint64_t wmask;
+ uint16_t sriov_cap = dev->exp.sriov_cap;
+
+ assert(sriov_cap > 0);
+ assert(region_num >= 0);
+ assert(region_num < PCI_NUM_REGIONS);
+ assert(region_num != PCI_ROM_SLOT);
+
+ wmask = ~(size - 1);
+ addr = sriov_cap + PCI_SRIOV_BAR + region_num * 4;
+
+ pci_set_long(dev->config + addr, type);
+ if (!(type & PCI_BASE_ADDRESS_SPACE_IO) &&
+ type & PCI_BASE_ADDRESS_MEM_TYPE_64) {
+ pci_set_quad(dev->wmask + addr, wmask);
+ pci_set_quad(dev->cmask + addr, ~0ULL);
+ } else {
+ pci_set_long(dev->wmask + addr, wmask & 0xffffffff);
+ pci_set_long(dev->cmask + addr, 0xffffffff);
+ }
+ dev->exp.sriov_pf.vf_bar_type[region_num] = type;
+}
+
+void pcie_sriov_vf_register_bar(PCIDevice *dev, int region_num,
+ MemoryRegion *memory)
+{
+ PCIIORegion *r;
+ uint8_t type;
+ pcibus_t size = memory_region_size(memory);
+
+ assert(pci_is_vf(dev)); /* PFs must use pci_register_bar */
+ assert(region_num >= 0);
+ assert(region_num < PCI_NUM_REGIONS);
+ type = dev->exp.sriov_vf.pf->exp.sriov_pf.vf_bar_type[region_num];
+
+ if (size & (size-1)) {
+ fprintf(stderr, "ERROR: PCI region size must be a power"
+ " of two - type=0x%x, size=0x%"FMT_PCIBUS"\n", type, size);
+ exit(1);
+ }
+
+ r = &dev->io_regions[region_num];
+ r->memory = memory;
+ r->address_space =
+ type & PCI_BASE_ADDRESS_SPACE_IO
+ ? dev->bus->address_space_io
+ : dev->bus->address_space_mem;
+ r->size = size;
+ r->type = type;
+
+ r->addr = pci_bar_address(dev, region_num, r->type, r->size);
+ if (r->addr != PCI_BAR_UNMAPPED) {
+ memory_region_add_subregion_overlap(r->address_space,
+ r->addr, r->memory, 1);
+ }
+}
+
+static PCIDevice *register_vf(PCIDevice *pf, int devfn, const char *name)
+{
+ int ret;
+ PCIDevice *dev = pci_create(pf->bus, devfn, name);
+ dev->exp.sriov_vf.pf = pf;
+
+ ret = qdev_init(&dev->qdev);
+ if (ret) {
+ return NULL;
+ }
+
+ /* set vid/did according to sr/iov spec - they are not used */
+ pci_config_set_vendor_id(dev->config, 0xffff);
+ pci_config_set_device_id(dev->config, 0xffff);
+ return dev;
+}
+
+static void register_vfs(PCIDevice *dev)
+{
+ uint16_t num_vfs;
+ uint16_t i;
+ uint16_t sriov_cap = dev->exp.sriov_cap;
+ uint16_t vf_offset = pci_get_word(dev->config + sriov_cap + PCI_SRIOV_VF_OFFSET);
+ uint16_t vf_stride = pci_get_word(dev->config + sriov_cap + PCI_SRIOV_VF_STRIDE);
+ int32_t devfn = dev->devfn + vf_offset;
+
+ assert(sriov_cap > 0);
+ num_vfs = pci_get_word(dev->config + sriov_cap + PCI_SRIOV_NUM_VF);
+
+ dev->exp.sriov_pf.vf = g_malloc(sizeof(PCIDevice *) * num_vfs);
+ assert(dev->exp.sriov_pf.vf);
+
+ SRIOV_DEV_PRINTF(dev, "creating %d vf devs\n", num_vfs);
+ for (i = 0; i < num_vfs; i++) {
+ dev->exp.sriov_pf.vf[i] = register_vf(dev, devfn, dev->exp.sriov_pf.vfname);
+ if (!dev->exp.sriov_pf.vf[i]) {
+ SRIOV_DEV_PRINTF(dev, "Failed to create VF %d at devfn %x.%x\n", i,
+ PCI_SLOT(devfn), PCI_FUNC(devfn));
+ num_vfs = i;
+ break;
+ }
+ devfn += vf_stride;
+ }
+ dev->exp.sriov_pf.num_vfs = num_vfs;
+}
+
+static void unregister_vfs(PCIDevice *dev)
+{
+ Error *local_err = NULL;
+ uint16_t num_vfs = dev->exp.sriov_pf.num_vfs;
+ uint16_t i;
+ SRIOV_DEV_PRINTF(dev, "Unregistering %d vf devs\n", num_vfs);
+ for (i = 0; i < num_vfs; i++) {
+ qdev_unplug(&dev->exp.sriov_pf.vf[i]->qdev, &local_err);
+ if (local_err) {
+ fprintf(stderr, "Failed to unplug: %s\n",
+ error_get_pretty(local_err));
+ error_free(local_err);
+ }
+ }
+ g_free(dev->exp.sriov_pf.vf);
+ dev->exp.sriov_pf.vf = NULL;
+ dev->exp.sriov_pf.num_vfs = 0;
+}
+
+void pcie_sriov_config_write(PCIDevice *dev, uint32_t address, uint32_t val, int len)
+{
+ uint32_t off;
+ uint16_t sriov_cap = dev->exp.sriov_cap;
+
+ if (!sriov_cap || address < sriov_cap) {
+ return;
+ }
+ off = address - sriov_cap;
+ if (off >= PCI_EXT_CAP_SRIOV_SIZEOF) {
+ return;
+ }
+
+ SRIOV_DEV_PRINTF(dev, "cap at 0x%x sriov offset 0x%x val 0x%x len %d\n",
+ sriov_cap, off, val, len);
+
+ if (range_covers_byte(off, len, PCI_SRIOV_CTRL)) {
+ if (dev->exp.sriov_pf.num_vfs) {
+ if (!(val & PCI_SRIOV_CTRL_VFE)) {
+ unregister_vfs(dev);
+ }
+ } else {
+ if (val & PCI_SRIOV_CTRL_VFE) {
+ register_vfs(dev);
+ }
+ }
+ }
+}
+
+
+/* Reset SR/IOV VF Enable bit to trigger an unregister of all VFs */
+void pcie_sriov_pf_disable_vfs(PCIDevice *dev)
+{
+ uint16_t sriov_cap = dev->exp.sriov_cap;
+ if (sriov_cap) {
+ uint32_t val = pci_get_byte(dev->config + sriov_cap + PCI_SRIOV_CTRL);
+ if (val & PCI_SRIOV_CTRL_VFE) {
+ val &= ~PCI_SRIOV_CTRL_VFE;
+ pcie_sriov_config_write(dev, sriov_cap + PCI_SRIOV_CTRL, val, 1);
+ }
+ }
+}
+
+/* Add optional supported page sizes to the mask of supported page sizes */
+void pcie_sriov_pf_add_sup_pgsize(PCIDevice *dev, uint16_t opt_sup_pgsize)
+{
+ uint8_t *cfg = dev->config + dev->exp.sriov_cap;
+ uint8_t *wmask = dev->wmask + dev->exp.sriov_cap;
+
+ uint16_t sup_pgsize = pci_get_word(cfg + PCI_SRIOV_SUP_PGSIZE);
+
+ sup_pgsize |= opt_sup_pgsize;
+
+ /* Make sure the new bits are set, and that system page size
+ * also can be set to any of the new values according to spec:
+ */
+ pci_set_word(cfg + PCI_SRIOV_SUP_PGSIZE, sup_pgsize);
+ pci_set_word(wmask + PCI_SRIOV_SYS_PGSIZE, sup_pgsize);
+}
diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index c352c7b..ebda70f 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -11,8 +11,6 @@
/* PCI includes legacy ISA access. */
#include "hw/isa/isa.h"
-#include "hw/pci/pcie.h"
-
/* PCI bus */
#define PCI_DEVFN(slot, func) ((((slot) & 0x1f) << 3) | ((func) & 0x07))
@@ -127,6 +125,7 @@ enum {
#define QEMU_PCI_VGA_IO_HI_SIZE 0x20
#include "hw/pci/pci_regs.h"
+#include "hw/pci/pcie.h"
/* PCI HEADER_TYPE */
#define PCI_HEADER_TYPE_MULTI_FUNCTION 0x80
@@ -413,6 +412,9 @@ typedef AddressSpace *(*PCIIOMMUFunc)(PCIBus *, void *, int);
AddressSpace *pci_device_iommu_address_space(PCIDevice *dev);
void pci_setup_iommu(PCIBus *bus, PCIIOMMUFunc fn, void *opaque);
+pcibus_t pci_bar_address(PCIDevice *d,
+ int reg, uint8_t type, pcibus_t size);
+
static inline void
pci_set_byte(uint8_t *config, uint8_t val)
{
@@ -664,6 +666,11 @@ static inline int pci_is_express(const PCIDevice *d)
return d->cap_present & QEMU_PCI_CAP_EXPRESS;
}
+static inline int pci_is_vf(const PCIDevice *d)
+{
+ return d->exp.sriov_vf.pf != NULL;
+}
+
static inline uint32_t pci_config_size(const PCIDevice *d)
{
return pci_is_express(d) ? PCIE_CONFIG_SPACE_SIZE : PCI_CONFIG_SPACE_SIZE;
diff --git a/include/hw/pci/pcie.h b/include/hw/pci/pcie.h
index d139d58..68578e2 100644
--- a/include/hw/pci/pcie.h
+++ b/include/hw/pci/pcie.h
@@ -25,6 +25,7 @@
#include "hw/pci/pci_regs.h"
#include "hw/pci/pcie_regs.h"
#include "hw/pci/pcie_aer.h"
+#include "hw/pci/pcie_sriov.h"
#include "hw/hotplug.h"
typedef enum {
@@ -74,6 +75,11 @@ struct PCIExpressDevice {
/* AER */
uint16_t aer_cap;
PCIEAERLog aer_log;
+
+ /* SR/IOV */
+ uint16_t sriov_cap;
+ PCIESriovPF sriov_pf;
+ PCIESriovVF sriov_vf;
};
#define COMPAT_PROP_PCP "power_controller_present"
diff --git a/include/hw/pci/pcie_sriov.h b/include/hw/pci/pcie_sriov.h
new file mode 100644
index 0000000..df8729f
--- /dev/null
+++ b/include/hw/pci/pcie_sriov.h
@@ -0,0 +1,55 @@
+/*
+ * pcie_sriov.h:
+ *
+ * Implementation of SR/IOV emulation support.
+ *
+ * Copyright (c) 2014 Knut Omang <knut.omang@oracle.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef QEMU_PCIE_SRIOV_H
+#define QEMU_PCIE_SRIOV_H
+
+
+
+struct PCIESriovPF {
+ uint16_t num_vfs; /* Number of virtual functions created */
+ uint8_t vf_bar_type[PCI_NUM_REGIONS]; /* Store type for each VF bar */
+ const char *vfname; /* Reference to the device type used for the VFs */
+ PCIDevice **vf; /* Pointer to an array of num_vfs VF devices */
+};
+
+struct PCIESriovVF {
+ PCIDevice *pf; /* Pointer back to owner physical function */
+};
+
+void pcie_sriov_pf_init(PCIDevice *dev, uint16_t offset,
+ const char *vfname, uint16_t vf_dev_id,
+ uint16_t init_vfs, uint16_t total_vfs,
+ uint16_t vf_offset, uint16_t vf_stride);
+void pcie_sriov_pf_exit(PCIDevice *dev);
+
+/* Set up a VF bar in the SR/IOV bar area */
+void pcie_sriov_pf_init_vf_bar(PCIDevice *dev, int region_num,
+ uint8_t type, dma_addr_t size);
+
+/* Instantiate a bar for a VF */
+void pcie_sriov_vf_register_bar(PCIDevice *dev, int region_num,
+ MemoryRegion *memory);
+
+/* Add optional supported page sizes to the mask of supported page sizes
+ * Page size values are interpreted as opt_sup_pgsize << 12.
+ */
+void pcie_sriov_pf_add_sup_pgsize(PCIDevice *dev, uint16_t opt_sup_pgsize);
+
+/* SR/IOV capability config write handler */
+void pcie_sriov_config_write(PCIDevice *dev, uint32_t address,
+ uint32_t val, int len);
+
+/* Reset SR/IOV VF Enable bit to unregister all VFs */
+void pcie_sriov_pf_disable_vfs(PCIDevice *dev);
+
+#endif /* QEMU_PCIE_SRIOV_H */
diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h
index 5f20b0e..1954818 100644
--- a/include/qemu/typedefs.h
+++ b/include/qemu/typedefs.h
@@ -58,6 +58,8 @@ typedef struct PCIBridge PCIBridge;
typedef struct PCIEAERMsg PCIEAERMsg;
typedef struct PCIEAERLog PCIEAERLog;
typedef struct PCIEAERErr PCIEAERErr;
+typedef struct PCIESriovPF PCIESriovPF;
+typedef struct PCIESriovVF PCIESriovVF;
typedef struct PCIEPort PCIEPort;
typedef struct PCIESlot PCIESlot;
typedef struct MSIMessage MSIMessage;
--
1.9.0
^ permalink raw reply related [flat|nested] 10+ messages in thread