qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
To: Peter Maydell <peter.maydell@linaro.org>
Cc: Greg Bellows <greg.bellows@linaro.org>,
	qemu-devel@nongnu.org, patches@linaro.org
Subject: Re: [Qemu-devel] [PATCH v4 02/17] hw/intc/arm_gic: Add Security Extensions property
Date: Tue, 5 May 2015 10:19:52 +1000	[thread overview]
Message-ID: <20150505001952.GE10142@toto> (raw)
In-Reply-To: <1430502643-25909-3-git-send-email-peter.maydell@linaro.org>

On Fri, May 01, 2015 at 06:50:28PM +0100, Peter Maydell wrote:
> From: Fabian Aggeler <aggelerf@ethz.ch>
> 
> Add a QOM property which allows the GIC Security Extensions to be
> enabled. These are an optional part of the GICv1 and GICv2 architecture.
> This commit just adds the property and some sanity checks that it
> is only enabled on GIC revisions that support it.
> 
> Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
> Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
> Message-id: 1429113742-8371-5-git-send-email-greg.bellows@linaro.org
> [PMM: changed property name, added checks that it isn't set for
>  older GIC revisions or if using the KVM VGIC; reworded commit message]
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>


> ---
>  hw/intc/arm_gic.c                | 5 ++++-
>  hw/intc/arm_gic_common.c         | 9 +++++++++
>  hw/intc/arm_gic_kvm.c            | 6 ++++++
>  include/hw/intc/arm_gic_common.h | 1 +
>  4 files changed, 20 insertions(+), 1 deletion(-)
> 
> diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c
> index e9fb8b9..cdf7408 100644
> --- a/hw/intc/arm_gic.c
> +++ b/hw/intc/arm_gic.c
> @@ -298,7 +298,10 @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset)
>          if (offset == 0)
>              return s->enabled;
>          if (offset == 4)
> -            return ((s->num_irq / 32) - 1) | ((NUM_CPU(s) - 1) << 5);
> +            /* Interrupt Controller Type Register */
> +            return ((s->num_irq / 32) - 1)
> +                    | ((NUM_CPU(s) - 1) << 5)
> +                    | (s->security_extn << 10);
>          if (offset < 0x08)
>              return 0;
>          if (offset >= 0x80) {
> diff --git a/hw/intc/arm_gic_common.c b/hw/intc/arm_gic_common.c
> index 18b01ba..5ed21f1 100644
> --- a/hw/intc/arm_gic_common.c
> +++ b/hw/intc/arm_gic_common.c
> @@ -110,6 +110,13 @@ static void arm_gic_common_realize(DeviceState *dev, Error **errp)
>                     num_irq);
>          return;
>      }
> +
> +    if (s->security_extn &&
> +        (s->revision == REV_11MPCORE || s->revision == REV_NVIC)) {
> +        error_setg(errp, "this GIC revision does not implement "
> +                   "the security extensions");
> +        return;
> +    }
>  }
>  
>  static void arm_gic_common_reset(DeviceState *dev)
> @@ -149,6 +156,8 @@ static Property arm_gic_common_properties[] = {
>       * (Internally, 0xffffffff also indicates "not a GIC but an NVIC".)
>       */
>      DEFINE_PROP_UINT32("revision", GICState, revision, 1),
> +    /* True if the GIC should implement the security extensions */
> +    DEFINE_PROP_BOOL("has-security-extensions", GICState, security_extn, 0),
>      DEFINE_PROP_END_OF_LIST(),
>  };
>  
> diff --git a/hw/intc/arm_gic_kvm.c b/hw/intc/arm_gic_kvm.c
> index 5aedae1..cb47b12 100644
> --- a/hw/intc/arm_gic_kvm.c
> +++ b/hw/intc/arm_gic_kvm.c
> @@ -544,6 +544,12 @@ static void kvm_arm_gic_realize(DeviceState *dev, Error **errp)
>          return;
>      }
>  
> +    if (s->security_extn) {
> +        error_setg(errp, "the in-kernel VGIC does not implement the "
> +                   "security extensions");
> +        return;
> +    }
> +
>      i = s->num_irq - GIC_INTERNAL;
>      /* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
>       * GPIO array layout is thus:
> diff --git a/include/hw/intc/arm_gic_common.h b/include/hw/intc/arm_gic_common.h
> index 01c6f24..7825134 100644
> --- a/include/hw/intc/arm_gic_common.h
> +++ b/include/hw/intc/arm_gic_common.h
> @@ -105,6 +105,7 @@ typedef struct GICState {
>      MemoryRegion cpuiomem[GIC_NCPU + 1]; /* CPU interfaces */
>      uint32_t num_irq;
>      uint32_t revision;
> +    bool security_extn;
>      int dev_fd; /* kvm device fd if backed by kvm vgic support */
>  } GICState;
>  
> -- 
> 1.9.1
> 

  reply	other threads:[~2015-05-05  0:23 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-01 17:50 [Qemu-devel] [PATCH v4 00/17] arm_gic: Add security and grouping support Peter Maydell
2015-05-01 17:50 ` [Qemu-devel] [PATCH v4 01/17] hw/intc/arm_gic: Create outbound FIQ lines Peter Maydell
2015-05-05  0:11   ` Edgar E. Iglesias
2015-05-01 17:50 ` [Qemu-devel] [PATCH v4 02/17] hw/intc/arm_gic: Add Security Extensions property Peter Maydell
2015-05-05  0:19   ` Edgar E. Iglesias [this message]
2015-05-01 17:50 ` [Qemu-devel] [PATCH v4 03/17] hw/intc/arm_gic: Switch to read/write callbacks with tx attributes Peter Maydell
2015-05-05  0:31   ` Edgar E. Iglesias
2015-05-01 17:50 ` [Qemu-devel] [PATCH v4 04/17] hw/intc/arm_gic: Add Interrupt Group Registers Peter Maydell
2015-05-05  0:55   ` Edgar E. Iglesias
2015-05-01 17:50 ` [Qemu-devel] [PATCH v4 05/17] hw/intc/arm_gic_kvm.c: Save and restore GICD_IGROUPRn state Peter Maydell
2015-05-01 17:50 ` [Qemu-devel] [PATCH v4 06/17] hw/intc/arm_gic: Make ICDDCR/GICD_CTLR banked Peter Maydell
2015-05-05  1:03   ` Edgar E. Iglesias
2015-05-01 17:50 ` [Qemu-devel] [PATCH v4 07/17] hw/intc/arm_gic: Make ICCBPR/GICC_BPR banked Peter Maydell
2015-05-05  1:06   ` Edgar E. Iglesias
2015-05-01 17:50 ` [Qemu-devel] [PATCH v4 08/17] hw/intc/arm_gic: Make ICCICR/GICC_CTLR banked Peter Maydell
2015-05-05  1:12   ` Edgar E. Iglesias
2015-05-01 17:50 ` [Qemu-devel] [PATCH v4 09/17] hw/intc/arm_gic: Implement Non-secure view of RPR Peter Maydell
2015-05-05  1:35   ` Edgar E. Iglesias
2015-05-01 17:50 ` [Qemu-devel] [PATCH v4 10/17] hw/intc/arm_gic: Restrict priority view Peter Maydell
2015-05-05  1:31   ` Edgar E. Iglesias
2015-05-01 17:50 ` [Qemu-devel] [PATCH v4 11/17] hw/intc/arm_gic: Handle grouping for GICC_HPPIR Peter Maydell
2015-05-05  1:43   ` Edgar E. Iglesias
2015-05-01 17:50 ` [Qemu-devel] [PATCH v4 12/17] hw/intc/arm_gic: Change behavior of EOIR writes Peter Maydell
2015-05-05  1:49   ` Edgar E. Iglesias
2015-05-01 17:50 ` [Qemu-devel] [PATCH v4 13/17] hw/intc/arm_gic: Change behavior of IAR writes Peter Maydell
2015-05-05  1:52   ` Edgar E. Iglesias
2015-05-01 17:50 ` [Qemu-devel] [PATCH v4 14/17] hw/intc/arm_gic: Add grouping support to gic_update() Peter Maydell
2015-05-05  1:57   ` Edgar E. Iglesias
2015-05-01 17:50 ` [Qemu-devel] [PATCH v4 15/17] hw/arm/virt.c: Wire FIQ between CPU <> GIC Peter Maydell
2015-05-05  1:58   ` Edgar E. Iglesias
2015-05-01 17:50 ` [Qemu-devel] [PATCH v4 16/17] hw/arm/vexpress.c: " Peter Maydell
2015-05-05  1:59   ` Edgar E. Iglesias
2015-05-01 17:50 ` [Qemu-devel] [PATCH v4 17/17] hw/arm/highbank.c: " Peter Maydell
2015-05-05  2:08 ` [Qemu-devel] [PATCH v4 00/17] arm_gic: Add security and grouping support Edgar E. Iglesias
2015-05-05  9:21   ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150505001952.GE10142@toto \
    --to=edgar.iglesias@gmail.com \
    --cc=greg.bellows@linaro.org \
    --cc=patches@linaro.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).