From: Fam Zheng <famz@redhat.com>
To: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>,
pbonzini@redhat.com, qemu-devel@nongnu.org,
qemu-block@nongnu.org, qemu-stable@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v6 2/3] block: Fix NULL deference for unaligned write if qiov is NULL
Date: Wed, 13 May 2015 13:03:29 +0800 [thread overview]
Message-ID: <20150513050329.GB22098@ad.nay.redhat.com> (raw)
In-Reply-To: <20150512121838.GC11497@stefanha-thinkpad.redhat.com>
On Tue, 05/12 13:18, Stefan Hajnoczi wrote:
> On Tue, May 12, 2015 at 02:09:31PM +0800, Fam Zheng wrote:
> > +static int coroutine_fn bdrv_co_do_zero_pwritev(BlockDriverState *bs,
> > + int64_t offset,
> > + unsigned int bytes,
> > + BdrvRequestFlags flags)
> > +{
> > + BdrvTrackedRequest req;
> > + uint8_t *buf = NULL;
> > + QEMUIOVector local_qiov;
> > + struct iovec iov;
> > + uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
> > + unsigned int head_padding_bytes, tail_padding_bytes;
> > + int ret;
> > +
> > + head_padding_bytes = offset & (align - 1);
> > + tail_padding_bytes = align - ((offset + bytes) & (align - 1));
> > + tracked_request_begin(&req, bs, offset, bytes, true);
> > +
> > + mark_request_serialising(&req, align);
>
> This is only necessary if (head_padding_bytes || tail_padding_bytes).
> Serialized requests are more expensive so let's only do it when
> necessary.
>
> > + wait_serialising_requests(&req);
> > +
> > + assert(flags & BDRV_REQ_ZERO_WRITE);
> > + if (head_padding_bytes || tail_padding_bytes) {
> > + buf = qemu_blockalign(bs, align);
> > + iov = (struct iovec) {
> > + .iov_base = buf,
> > + .iov_len = align,
> > + };
> > + qemu_iovec_init_external(&local_qiov, &iov, 1);
> > + }
> > + if (head_padding_bytes) {
> > + uint64_t zero_bytes = MIN(bytes, align - head_padding_bytes);
> > +
> > + /* RMW the unaligned part before head. */
> > + BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD);
> > + ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align,
> > + align, &local_qiov, 0);
> > + if (ret < 0) {
> > + goto fail;
> > + }
> > + BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD);
> > +
> > + memset(buf + head_padding_bytes, 0, zero_bytes);
> > + ret = bdrv_aligned_pwritev(bs, &req, offset & ~(align - 1), align,
> > + &local_qiov,
> > + flags & ~BDRV_REQ_ZERO_WRITE);
> > + if (ret < 0) {
> > + goto fail;
> > + }
> > + offset += zero_bytes;
> > + bytes -= zero_bytes;
> > + }
> > +
> > + assert((offset & (align - 1)) == 0);
> > + if (bytes >= align) {
> > + /* Write the aligned part in the middle. */
> > + uint64_t aligned_bytes = bytes & ~(align - 1);
> > + ret = bdrv_aligned_pwritev(bs, &req, offset, aligned_bytes,
> > + NULL, flags);
> > + if (ret < 0) {
> > + goto fail;
> > + }
> > + bytes -= aligned_bytes;
> > + offset += aligned_bytes;
> > + }
> > +
> > + assert((offset & (align - 1)) == 0);
> > + if (bytes) {
> > + assert(align == tail_padding_bytes + bytes);
> > + /* RMW the unaligned part after tail. */
> > + BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL);
> > + ret = bdrv_aligned_preadv(bs, &req, offset, align,
> > + align, &local_qiov, 0);
> > + if (ret < 0) {
> > + goto fail;
> > + }
> > + BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
> > +
> > + memset(buf, 0, bytes);
> > + printf("tail part %ld %d\n", offset, bytes);
>
> Please drop the debug printf.
>
> > + ret = bdrv_aligned_pwritev(bs, &req, offset, align,
> > + &local_qiov, flags & ~BDRV_REQ_ZERO_WRITE);
> > + }
> > +fail:
> > + tracked_request_end(&req);
> > + if (buf) {
> > + qemu_vfree(buf);
> > + }
>
> if (buf) is unnecessary. qemu_vfree(NULL) is a nop.
OK, will fix them.
Thanks,
Fam
next prev parent reply other threads:[~2015-05-13 5:03 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-12 6:09 [Qemu-devel] [PATCH v6 0/3] block: Fix unaligned bdrv_aio_write_zeroes Fam Zheng
2015-05-12 6:09 ` [Qemu-devel] [PATCH v6 1/3] Revert "block: Fix unaligned zero write" Fam Zheng
2015-05-12 11:52 ` Kevin Wolf
2015-05-12 6:09 ` [Qemu-devel] [PATCH v6 2/3] block: Fix NULL deference for unaligned write if qiov is NULL Fam Zheng
2015-05-12 11:52 ` Kevin Wolf
2015-05-13 5:03 ` Fam Zheng
2015-05-12 12:18 ` Stefan Hajnoczi
2015-05-13 5:03 ` Fam Zheng [this message]
2015-05-12 6:09 ` [Qemu-devel] [PATCH v6 3/3] qemu-iotests: Test unaligned sub-block zero write Fam Zheng
2015-05-12 11:54 ` Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150513050329.GB22098@ad.nay.redhat.com \
--to=famz@redhat.com \
--cc=kwolf@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-stable@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).