From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>
To: Peter Maydell <peter.maydell@linaro.org>
Cc: agraf@suse.de, serge.fdrv@gmail.com, alex.bennee@linaro.org,
qemu-devel@nongnu.org, patches@linaro.org
Subject: Re: [Qemu-devel] [PATCH 04/14] target-arm: Move setting of exception info into tlb_fill
Date: Thu, 28 May 2015 15:32:47 +1000 [thread overview]
Message-ID: <20150528053247.GI30952@toto> (raw)
In-Reply-To: <1432060414-5195-5-git-send-email-peter.maydell@linaro.org>
On Tue, May 19, 2015 at 07:33:24PM +0100, Peter Maydell wrote:
> Move the code which sets exception information out of
> arm_cpu_handle_mmu_fault and into tlb_fill. tlb_fill
> is the only caller which wants to raise_exception()
> so it makes more sense for it to handle the whole of
> the exception setup.
>
> As part of this cleanup, move the user-mode-only
> implementation function for the handle_mmu_fault CPU
> method into cpu.c so we don't need to make it globally
> visible, and rename the softmmu-only utility function
> arm_cpu_handle_mmu_fault to arm_tlb_fill so it's clear
> that it's not the same thing.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
>
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> ---
> target-arm/cpu.c | 17 +++++++++++++++++
> target-arm/cpu.h | 2 --
> target-arm/helper.c | 47 +++++++----------------------------------------
> target-arm/internals.h | 3 +++
> target-arm/op_helper.c | 27 +++++++++++++++++++++++++--
> 5 files changed, 52 insertions(+), 44 deletions(-)
>
> diff --git a/target-arm/cpu.c b/target-arm/cpu.c
> index 3ca3fa8..798c689 100644
> --- a/target-arm/cpu.c
> +++ b/target-arm/cpu.c
> @@ -1197,6 +1197,23 @@ static Property arm_cpu_properties[] = {
> DEFINE_PROP_END_OF_LIST()
> };
>
> +#ifdef CONFIG_USER_ONLY
> +static int arm_cpu_handle_mmu_fault(CPUState *cs, vaddr address, int rw,
> + int mmu_idx)
> +{
> + ARMCPU *cpu = ARM_CPU(cs);
> + CPUARMState *env = &cpu->env;
> +
> + env->exception.vaddress = address;
> + if (rw == 2) {
> + cs->exception_index = EXCP_PREFETCH_ABORT;
> + } else {
> + cs->exception_index = EXCP_DATA_ABORT;
> + }
> + return 1;
> +}
> +#endif
> +
> static void arm_cpu_class_init(ObjectClass *oc, void *data)
> {
> ARMCPUClass *acc = ARM_CPU_CLASS(oc);
> diff --git a/target-arm/cpu.h b/target-arm/cpu.h
> index 75d6c4c..6845666 100644
> --- a/target-arm/cpu.h
> +++ b/target-arm/cpu.h
> @@ -504,8 +504,6 @@ static inline bool is_a64(CPUARMState *env)
> is returned if the signal was handled by the virtual CPU. */
> int cpu_arm_signal_handler(int host_signum, void *pinfo,
> void *puc);
> -int arm_cpu_handle_mmu_fault(CPUState *cpu, vaddr address, int rw,
> - int mmu_idx);
>
> /**
> * pmccntr_sync
> diff --git a/target-arm/helper.c b/target-arm/helper.c
> index 5d0f011..a9e85b9 100644
> --- a/target-arm/helper.c
> +++ b/target-arm/helper.c
> @@ -4047,21 +4047,6 @@ uint32_t HELPER(rbit)(uint32_t x)
>
> #if defined(CONFIG_USER_ONLY)
>
> -int arm_cpu_handle_mmu_fault(CPUState *cs, vaddr address, int rw,
> - int mmu_idx)
> -{
> - ARMCPU *cpu = ARM_CPU(cs);
> - CPUARMState *env = &cpu->env;
> -
> - env->exception.vaddress = address;
> - if (rw == 2) {
> - cs->exception_index = EXCP_PREFETCH_ABORT;
> - } else {
> - cs->exception_index = EXCP_DATA_ABORT;
> - }
> - return 1;
> -}
> -
> /* These should probably raise undefined insn exceptions. */
> void HELPER(v7m_msr)(CPUARMState *env, uint32_t reg, uint32_t val)
> {
> @@ -5826,8 +5811,12 @@ static inline int get_phys_addr(CPUARMState *env, target_ulong address,
> }
> }
>
> -int arm_cpu_handle_mmu_fault(CPUState *cs, vaddr address,
> - int access_type, int mmu_idx)
> +/* Walk the page table and (if the mapping exists) add the page
> + * to the TLB. Return 0 on success, or an ARM DFSR/IFSR fault
> + * register format value on failure.
> + */
> +int arm_tlb_fill(CPUState *cs, vaddr address,
> + int access_type, int mmu_idx)
> {
> ARMCPU *cpu = ARM_CPU(cs);
> CPUARMState *env = &cpu->env;
> @@ -5835,8 +5824,6 @@ int arm_cpu_handle_mmu_fault(CPUState *cs, vaddr address,
> target_ulong page_size;
> int prot;
> int ret;
> - uint32_t syn;
> - bool same_el = (arm_current_el(env) != 0);
> MemTxAttrs attrs = {};
>
> ret = get_phys_addr(env, address, access_type, mmu_idx, &phys_addr,
> @@ -5850,27 +5837,7 @@ int arm_cpu_handle_mmu_fault(CPUState *cs, vaddr address,
> return 0;
> }
>
> - /* AArch64 syndrome does not have an LPAE bit */
> - syn = ret & ~(1 << 9);
> -
> - /* For insn and data aborts we assume there is no instruction syndrome
> - * information; this is always true for exceptions reported to EL1.
> - */
> - if (access_type == 2) {
> - syn = syn_insn_abort(same_el, 0, 0, syn);
> - cs->exception_index = EXCP_PREFETCH_ABORT;
> - } else {
> - syn = syn_data_abort(same_el, 0, 0, 0, access_type == 1, syn);
> - if (access_type == 1 && arm_feature(env, ARM_FEATURE_V6)) {
> - ret |= (1 << 11);
> - }
> - cs->exception_index = EXCP_DATA_ABORT;
> - }
> -
> - env->exception.syndrome = syn;
> - env->exception.vaddress = address;
> - env->exception.fsr = ret;
> - return 1;
> + return ret;
> }
>
> hwaddr arm_cpu_get_phys_page_debug(CPUState *cs, vaddr addr)
> diff --git a/target-arm/internals.h b/target-arm/internals.h
> index de0a9c1..1e5071e 100644
> --- a/target-arm/internals.h
> +++ b/target-arm/internals.h
> @@ -387,4 +387,7 @@ bool arm_is_psci_call(ARMCPU *cpu, int excp_type);
> void arm_handle_psci_call(ARMCPU *cpu);
> #endif
>
> +/* Do a page table walk and add page to TLB if possible */
> +int arm_tlb_fill(CPUState *cpu, vaddr address, int rw, int mmu_idx);
> +
> #endif
> diff --git a/target-arm/op_helper.c b/target-arm/op_helper.c
> index 5af4a0e..cda9767 100644
> --- a/target-arm/op_helper.c
> +++ b/target-arm/op_helper.c
> @@ -80,16 +80,39 @@ void tlb_fill(CPUState *cs, target_ulong addr, int is_write, int mmu_idx,
> {
> int ret;
>
> - ret = arm_cpu_handle_mmu_fault(cs, addr, is_write, mmu_idx);
> + ret = arm_tlb_fill(cs, addr, is_write, mmu_idx);
> if (unlikely(ret)) {
> ARMCPU *cpu = ARM_CPU(cs);
> CPUARMState *env = &cpu->env;
> + uint32_t syn, exc;
> + bool same_el = (arm_current_el(env) != 0);
>
> if (retaddr) {
> /* now we have a real cpu fault */
> cpu_restore_state(cs, retaddr);
> }
> - raise_exception(env, cs->exception_index);
> +
> + /* AArch64 syndrome does not have an LPAE bit */
> + syn = ret & ~(1 << 9);
> +
> + /* For insn and data aborts we assume there is no instruction syndrome
> + * information; this is always true for exceptions reported to EL1.
> + */
> + if (is_write == 2) {
> + syn = syn_insn_abort(same_el, 0, 0, syn);
> + exc = EXCP_PREFETCH_ABORT;
> + } else {
> + syn = syn_data_abort(same_el, 0, 0, 0, is_write == 1, syn);
> + if (is_write == 1 && arm_feature(env, ARM_FEATURE_V6)) {
> + ret |= (1 << 11);
> + }
> + exc = EXCP_DATA_ABORT;
> + }
> +
> + env->exception.syndrome = syn;
> + env->exception.vaddress = addr;
> + env->exception.fsr = ret;
> + raise_exception(env, exc);
> }
> }
> #endif
> --
> 1.9.1
>
next prev parent reply other threads:[~2015-05-28 5:36 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-19 18:33 [Qemu-devel] [PATCH 00/14] Various EL3 support/cleanup patches Peter Maydell
2015-05-19 18:33 ` [Qemu-devel] [PATCH 01/14] target-arm: Add exception target el infrastructure Peter Maydell
2015-05-19 18:33 ` [Qemu-devel] [PATCH 02/14] target-arm: Extend helpers to route exceptions Peter Maydell
2015-05-19 18:33 ` [Qemu-devel] [PATCH 03/14] target-arm: Set correct syndrome for faults on MSR DAIF*, imm Peter Maydell
2015-05-28 5:30 ` Edgar E. Iglesias
2015-05-28 8:30 ` Peter Maydell
2015-05-28 11:40 ` Peter Maydell
2015-05-28 11:44 ` Edgar E. Iglesias
2015-05-28 11:54 ` Peter Maydell
2015-05-19 18:33 ` [Qemu-devel] [PATCH 04/14] target-arm: Move setting of exception info into tlb_fill Peter Maydell
2015-05-28 5:32 ` Edgar E. Iglesias [this message]
2015-05-19 18:33 ` [Qemu-devel] [PATCH 05/14] target-arm: Set exception target EL in tlb_fill Peter Maydell
2015-05-28 5:39 ` Edgar E. Iglesias
2015-05-19 18:33 ` [Qemu-devel] [PATCH 06/14] target-arm: Make raise_exception() take syndrome and target EL Peter Maydell
2015-05-28 5:42 ` Edgar E. Iglesias
2015-05-19 18:33 ` [Qemu-devel] [PATCH 07/14] target-arm: Update interrupt handling to use " Peter Maydell
2015-05-19 18:33 ` [Qemu-devel] [PATCH 08/14] target-arm: Allow cp access functions to indicate traps to EL2 or EL3 Peter Maydell
2015-05-21 5:47 ` Edgar E. Iglesias
2015-05-21 7:04 ` Peter Maydell
2015-05-28 11:48 ` Edgar E. Iglesias
2015-05-28 11:56 ` Peter Maydell
2015-05-19 18:33 ` [Qemu-devel] [PATCH 09/14] target-arm: Add AArch64 CPTR registers Peter Maydell
2015-05-28 12:12 ` Edgar E. Iglesias
2015-05-19 18:33 ` [Qemu-devel] [PATCH 10/14] target-arm: Make singlestate TB flags common between AArch32/64 Peter Maydell
2015-05-28 5:51 ` Edgar E. Iglesias
2015-05-19 18:33 ` [Qemu-devel] [PATCH 11/14] target-arm: Extend FP checks to use an EL Peter Maydell
2015-05-28 12:50 ` Edgar E. Iglesias
2015-05-28 13:19 ` Peter Maydell
2015-05-28 13:27 ` Edgar E. Iglesias
2015-05-28 14:48 ` Peter Maydell
2015-05-19 18:33 ` [Qemu-devel] [PATCH 12/14] target-arm: Move TB flags down to fill gap Peter Maydell
2015-05-28 5:53 ` Edgar E. Iglesias
2015-05-19 18:33 ` [Qemu-devel] [PATCH 13/14] target-arm: Don't halt on WFI unless we don't have any work Peter Maydell
2015-05-28 5:55 ` Edgar E. Iglesias
2015-05-19 18:33 ` [Qemu-devel] [PATCH 14/14] target-arm: Add WFx instruction trap support Peter Maydell
2015-05-28 5:59 ` Edgar E. Iglesias
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150528053247.GI30952@toto \
--to=edgar.iglesias@xilinx.com \
--cc=agraf@suse.de \
--cc=alex.bennee@linaro.org \
--cc=patches@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=serge.fdrv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).