qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Laszlo Ersek <lersek@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>,
	Kevin O'Connor <kevin@koconnor.net>,
	qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v7 10/10] hw/pci-bridge: format special OFW unit address for PXB host
Date: Wed, 24 Jun 2015 07:40:05 +0200	[thread overview]
Message-ID: <20150624054005.GA30653@redhat.com> (raw)
In-Reply-To: <1434681617-15539-11-git-send-email-lersek@redhat.com>

On Fri, Jun 19, 2015 at 04:40:17AM +0200, Laszlo Ersek wrote:
> We have agreed that OpenFirmware device paths in the "bootorder" fw_cfg
> file should follow the pattern
> 
>   /pci@i0cf8,%x/...
> 
> for devices that live behind an extra root bus. The extra root bus in
> question is the %x'th among the extra root buses. (In other words, %x
> gives the position of the affected extra root bus relative to the other
> extra root buses, in bus_nr order.) %x starts at 1, and is formatted in
> hex.
> 
> The portion of the unit address that comes before the comma is dynamically
> taken from the main host bridge, similarly to sysbus_get_fw_dev_path().
> 
> Cc: Kevin O'Connor <kevin@koconnor.net>
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Cc: Marcel Apfelbaum <marcel@redhat.com>
> Signed-off-by: Laszlo Ersek <lersek@redhat.com>

So as I said, a global pxb_dev_list is ugly, and we do not want
duplicate data structures - please scan child devices of parent instead.
Functionally correct, so can be a patch on top.


> ---
> 
> Notes:
>     v7:
>     - implement the format that both Kevin and Michael agreed with. Example:
>       /pci@i0cf8,1/pci-bridge@0/scsi@0/channel@0/disk@0,0
>     - I updated the OVMF patchset accordingly, but I won't post it until
>       this QEMU patch is applied
>     - Someone please write the SeaBIOS patch
>     
>     v6:
>     - no changes
>     
>     v5:
>     - constify parameter and local variables of pxb_host_ofw_unit_address(),
>       in accord with the previous patch
>     
>     v4:
>     - new in v4
> 
>  hw/pci-bridge/pci_expander_bridge.c | 53 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 53 insertions(+)
> 
> diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
> index 70708ef..57f8a37 100644
> --- a/hw/pci-bridge/pci_expander_bridge.c
> +++ b/hw/pci-bridge/pci_expander_bridge.c
> @@ -43,6 +43,8 @@ typedef struct PXBDev {
>      uint16_t numa_node;
>  } PXBDev;
>  
> +static GList *pxb_dev_list;
> +
>  #define TYPE_PXB_HOST "pxb-host"
>  
>  static int pxb_bus_num(PCIBus *bus)
> @@ -89,12 +91,45 @@ static const char *pxb_host_root_bus_path(PCIHostState *host_bridge,
>      return bus->bus_path;
>  }
>  
> +static char *pxb_host_ofw_unit_address(const SysBusDevice *dev)
> +{
> +    const PCIHostState *pxb_host;
> +    const PCIBus *pxb_bus;
> +    const PXBDev *pxb_dev;
> +    int position;
> +    const DeviceState *pxb_dev_base;
> +    const PCIHostState *main_host;
> +    const SysBusDevice *main_host_sbd;
> +
> +    pxb_host = PCI_HOST_BRIDGE(dev);
> +    pxb_bus = pxb_host->bus;
> +    pxb_dev = PXB_DEV(pxb_bus->parent_dev);
> +    position = g_list_index(pxb_dev_list, pxb_dev);
> +    assert(position >= 0);
> +
> +    pxb_dev_base = DEVICE(pxb_dev);
> +    main_host = PCI_HOST_BRIDGE(pxb_dev_base->parent_bus->parent);
> +    main_host_sbd = SYS_BUS_DEVICE(main_host);
> +
> +    if (main_host_sbd->num_mmio > 0) {
> +        return g_strdup_printf(TARGET_FMT_plx ",%x",
> +                               main_host_sbd->mmio[0].addr, position + 1);
> +    }
> +    if (main_host_sbd->num_pio > 0) {
> +        return g_strdup_printf("i%04x,%x",
> +                               main_host_sbd->pio[0], position + 1);
> +    }
> +    return NULL;
> +}
> +
>  static void pxb_host_class_init(ObjectClass *class, void *data)
>  {
>      DeviceClass *dc = DEVICE_CLASS(class);
> +    SysBusDeviceClass *sbc = SYS_BUS_DEVICE_CLASS(class);
>      PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(class);
>  
>      dc->fw_name = "pci";
> +    sbc->explicit_ofw_unit_address = pxb_host_ofw_unit_address;
>      hc->root_bus_path = pxb_host_root_bus_path;
>  }
>  
> @@ -149,6 +184,15 @@ static int pxb_map_irq_fn(PCIDevice *pci_dev, int pin)
>      return pin - PCI_SLOT(pxb->devfn);
>  }
>  
> +static gint pxb_compare(gconstpointer a, gconstpointer b)
> +{
> +    const PXBDev *pxb_a = a, *pxb_b = b;
> +
> +    return pxb_a->bus_nr < pxb_b->bus_nr ? -1 :
> +           pxb_a->bus_nr > pxb_b->bus_nr ?  1 :
> +           0;
> +}
> +
>  static int pxb_dev_initfn(PCIDevice *dev)
>  {
>      PXBDev *pxb = PXB_DEV(dev);
> @@ -192,9 +236,17 @@ static int pxb_dev_initfn(PCIDevice *dev)
>                                 PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK);
>      pci_config_set_class(dev->config, PCI_CLASS_BRIDGE_HOST);
>  
> +    pxb_dev_list = g_list_insert_sorted(pxb_dev_list, pxb, pxb_compare);
>      return 0;
>  }
>  
> +static void pxb_dev_exitfn(PCIDevice *pci_dev)
> +{
> +    PXBDev *pxb = PXB_DEV(pci_dev);
> +
> +    pxb_dev_list = g_list_remove(pxb_dev_list, pxb);
> +}
> +
>  static Property pxb_dev_properties[] = {
>      /* Note: 0 is not a legal a PXB bus number. */
>      DEFINE_PROP_UINT8("bus_nr", PXBDev, bus_nr, 0),
> @@ -208,6 +260,7 @@ static void pxb_dev_class_init(ObjectClass *klass, void *data)
>      PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
>  
>      k->init = pxb_dev_initfn;
> +    k->exit = pxb_dev_exitfn;
>      k->vendor_id = PCI_VENDOR_ID_REDHAT;
>      k->device_id = PCI_DEVICE_ID_REDHAT_PXB;
>      k->class_id = PCI_CLASS_BRIDGE_HOST;
> -- 
> 1.8.3.1

  reply	other threads:[~2015-06-24  5:40 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-19  2:40 [Qemu-devel] [PATCH v7 00/10] PXB changes Laszlo Ersek
2015-06-19  2:40 ` [Qemu-devel] [PATCH v7 01/10] migration: introduce VMSTATE_BUFFER_UNSAFE_INFO_TEST() Laszlo Ersek
2015-06-19  2:40 ` [Qemu-devel] [PATCH v7 02/10] hw/pci-bridge: expose _test parameter in SHPC_VMSTATE() Laszlo Ersek
2015-06-19  2:40 ` [Qemu-devel] [PATCH v7 03/10] hw/pci-bridge: add macro for "chassis_nr" property Laszlo Ersek
2015-06-19  2:40 ` [Qemu-devel] [PATCH v7 04/10] hw/pci-bridge: add macro for "msi" property Laszlo Ersek
2015-06-19  2:40 ` [Qemu-devel] [PATCH v7 05/10] hw/pci: introduce shpc_present() helper function Laszlo Ersek
2015-06-19  2:40 ` [Qemu-devel] [PATCH v7 06/10] hw/pci-bridge: introduce "shpc" property Laszlo Ersek
2015-06-19  2:40 ` [Qemu-devel] [PATCH v7 07/10] hw/pci-bridge: disable SHPC in PXB Laszlo Ersek
2015-06-19  2:40 ` [Qemu-devel] [PATCH v7 08/10] hw/core: rebase sysbus_get_fw_dev_path() to g_strdup_printf() Laszlo Ersek
2015-06-19  2:40 ` [Qemu-devel] [PATCH v7 09/10] hw/core: explicit OFW unit address callback for SysBusDeviceClass Laszlo Ersek
2015-06-19  2:40 ` [Qemu-devel] [PATCH v7 10/10] hw/pci-bridge: format special OFW unit address for PXB host Laszlo Ersek
2015-06-24  5:40   ` Michael S. Tsirkin [this message]
2015-06-24  7:01     ` Laszlo Ersek
2015-06-24  7:08       ` Marcel Apfelbaum
2015-06-24 17:11   ` Kevin O'Connor
2015-06-24 17:14     ` Marcel Apfelbaum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150624054005.GA30653@redhat.com \
    --to=mst@redhat.com \
    --cc=kevin@koconnor.net \
    --cc=lersek@redhat.com \
    --cc=marcel@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).