Re: [Qemu-devel] [v8][RESEND][PATCH 00/10] xen: add Intel IGD passthrough

["Michael S. Tsirkin" <mst@redhat.com>]

On Fri, Jun 05, 2015 at 04:44:51PM +0800, Tiejun Chen wrote:
> v8:
> 
> * Rebase on the latest qemu tree
> * Cleanup one xen leftover in patch #3

For the PC bits:

Acked-by: Michael S. Tsirkin <mst@redhat.com>


> v7:
> 
> * Instead of "-gfx_passthru" we'd like to make that a machine
>   option, "-machine xxx,igd-passthru=on"" 
> * try to make something as common shared by others like KvmGT in
>   the future
> * Just read those real value from host bridge pci
>   configuration space when create host bridge then put in dev->config.
> 
> v6:
> 
> * Drop introducing a new machine specific to IGD passthrough
> * Try to share some codes from KVM stuff in qemu to retrive VGA BIOS
> * Currently IGD drivers always need to access PCH by 1f.0. But we
>   don't want to poke that directly to get ID, and although in real
>   world different GPU should have different PCH. But actually the
>   different PCH DIDs likely map to different PCH SKUs. We do the
>   same thing for the GPU. For PCH, the different SKUs are going to
>   be all the same silicon design and implementation, just different
>   features turn on and off with fuses. The SW interfaces should be
>   consistent across all SKUs in a given family (eg LPT). But just
>   same features may not be supported.
>  
>   Most of these different PCH features probably don't matter to the
>   Gfx driver, but obviously any difference in display port connections
>   will so it should be fine with any PCH in case of passthrough.
>  
>   So currently use one PCH version, 0x8c4e, to cover all HSW(Haswell)
>   scenarios, 0x9cc3 for BDW(Broadwell).
> * Drop igd write ops since its fine to emulate that, and we also shrink
>   those igd read ops as necessary.
> * Rebase and cleanup all patches.
> 
> v5:
> 
> * Simplify to make sure its really inherited from the standard one in patch #3
> * Then drop the original patch #3
> 
> v4:
> 
> * Rebase on latest tree
> * Drop patch #2
> * Regenerate patches after Michael introduce patch #1
> * We need to use this pci_type as a index to reuse I440FX_PCI_DEVICE()
> * Test: boot with a preinstalled winxp
>   ./i386-softmmu/qemu-system-i386 -hda winxp-32.img -m 2560 -boot c -machine pc
> 
> v3:
> 
> * Drop patch #4
> * Add one patch #1 from Michael
> * Rebase
> * In./i386-softmmu/qemu-system-i386 -hda test.img -m 2560 -boot c -machine pc
> 
> v2:
> 
> * Fix some coding style
> * New patch to separate i440fx_init
> * Just add prefix with XEN_IGD_PASSTHROUGH/xen_igd_passthrough
> * Based on patch #2 to regenerate
> * Unify prefix with XEN_IGD_PASSTHROUGH/xen_igd_passthrough like patch #3
> * Test: boot with a preinstalled ubuntu 14.04
>   ./i386-softmmu/qemu-system-i386 -hda test.img -m 2560 -boot c -machine pc
> 
> As we discussed we need to create a separate machine to support current
> IGD passthrough.
> 
> ----------------------------------------------------------------
> Michael S. Tsirkin (1):
>       i440fx: make types configurable at run-time
> 
> Tiejun Chen (9):
>       pc_init1: pass parameters just with types
>       piix: create host bridge to passthrough
>       hw/pci-assign: split pci-assign.c
>       xen, gfx passthrough: basic graphics passthrough support
>       xen, gfx passthrough: retrieve VGA BIOS to work
>       igd gfx passthrough: create a isa bridge
>       xen, gfx passthrough: register a isa bridge
>       xen, gfx passthrough: register host bridge specific to passthrough
>       xen, gfx passthrough: add opregion mapping
> 
>  hw/core/machine.c             |  20 +++
>  hw/i386/Makefile.objs         |   1 +
>  hw/i386/kvm/pci-assign.c      |  82 +---------
>  hw/i386/pc_piix.c             | 151 ++++++++++++++++++-
>  hw/i386/pci-assign-load-rom.c |  93 ++++++++++++
>  hw/pci-host/piix.c            |  91 +++++++++++-
>  hw/xen/Makefile.objs          |   1 +
>  hw/xen/xen-host-pci-device.c  |   5 +
>  hw/xen/xen-host-pci-device.h  |   1 +
>  hw/xen/xen_pt.c               |  32 ++++
>  hw/xen/xen_pt.h               |  21 ++-
>  hw/xen/xen_pt_config_init.c   |  51 ++++++-
>  hw/xen/xen_pt_graphics.c      | 272 ++++++++++++++++++++++++++++++++++
>  include/hw/boards.h           |   1 +
>  include/hw/i386/pc.h          |   8 +-
>  include/hw/pci/pci-assign.h   |  27 ++++
>  include/hw/xen/xen.h          |   1 +
>  qemu-options.hx               |   3 +
>  vl.c                          |  10 ++
>  19 files changed, 780 insertions(+), 91 deletions(-)
>  create mode 100644 hw/i386/pci-assign-load-rom.c
>  create mode 100644 hw/xen/xen_pt_graphics.c
>  create mode 100644 include/hw/pci/pci-assign.h
> 
> Thanks
> Tiejun