* [Qemu-devel] [PATCH v11 1/5] hw/intc: Implement GIC-500 base class
2015-08-19 7:23 [Qemu-devel] [PATCH v11 0/5] vGICv3 support Pavel Fedin
@ 2015-08-19 7:23 ` Pavel Fedin
2015-08-19 7:23 ` [Qemu-devel] [PATCH v11 2/5] intc/gic: Extract some reusable vGIC code Pavel Fedin
` (4 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Pavel Fedin @ 2015-08-19 7:23 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Shlomo Pongratz, Shlomo Pongratz, Christoffer Dall,
Eric Auger
From: Shlomo Pongratz <shlomo.pongratz@huawei.com>
This class is to be used by both software and KVM implementations of GICv3
Currently it is mostly a placeholder, but in future it is supposed to hold
qemu's representation of GICv3 state, which is necessary for migration.
The interface of this class is fully compatible with GICv2 one. This is
done in order to simplify integration with existing code.
Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com>
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
---
hw/intc/Makefile.objs | 1 +
hw/intc/arm_gicv3_common.c | 140 +++++++++++++++++++++++++++++++++++++
include/hw/intc/arm_gicv3_common.h | 68 ++++++++++++++++++
3 files changed, 209 insertions(+)
create mode 100644 hw/intc/arm_gicv3_common.c
create mode 100644 include/hw/intc/arm_gicv3_common.h
diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs
index 092d8a8..1317e5a 100644
--- a/hw/intc/Makefile.objs
+++ b/hw/intc/Makefile.objs
@@ -12,6 +12,7 @@ common-obj-$(CONFIG_IOAPIC) += ioapic_common.o
common-obj-$(CONFIG_ARM_GIC) += arm_gic_common.o
common-obj-$(CONFIG_ARM_GIC) += arm_gic.o
common-obj-$(CONFIG_ARM_GIC) += arm_gicv2m.o
+common-obj-$(CONFIG_ARM_GIC) += arm_gicv3_common.o
common-obj-$(CONFIG_OPENPIC) += openpic.o
obj-$(CONFIG_APIC) += apic.o apic_common.o
diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
new file mode 100644
index 0000000..032ece2
--- /dev/null
+++ b/hw/intc/arm_gicv3_common.c
@@ -0,0 +1,140 @@
+/*
+ * ARM GICv3 support - common bits of emulated and KVM kernel model
+ *
+ * Copyright (c) 2012 Linaro Limited
+ * Copyright (c) 2015 Huawei.
+ * Written by Peter Maydell
+ * Extended to 64 cores by Shlomo Pongratz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "hw/intc/arm_gicv3_common.h"
+
+static void gicv3_pre_save(void *opaque)
+{
+ GICv3State *s = (GICv3State *)opaque;
+ ARMGICv3CommonClass *c = ARM_GICV3_COMMON_GET_CLASS(s);
+
+ if (c->pre_save) {
+ c->pre_save(s);
+ }
+}
+
+static int gicv3_post_load(void *opaque, int version_id)
+{
+ GICv3State *s = (GICv3State *)opaque;
+ ARMGICv3CommonClass *c = ARM_GICV3_COMMON_GET_CLASS(s);
+
+ if (c->post_load) {
+ c->post_load(s);
+ }
+ return 0;
+}
+
+static const VMStateDescription vmstate_gicv3 = {
+ .name = "arm_gicv3",
+ .unmigratable = 1,
+ .pre_save = gicv3_pre_save,
+ .post_load = gicv3_post_load,
+};
+
+void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
+ const MemoryRegionOps *ops)
+{
+ SysBusDevice *sbd = SYS_BUS_DEVICE(s);
+ int i;
+
+ /* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
+ * GPIO array layout is thus:
+ * [0..N-1] spi
+ * [N..N+31] PPIs for CPU 0
+ * [N+32..N+63] PPIs for CPU 1
+ * ...
+ */
+ i = s->num_irq - GIC_INTERNAL + GIC_INTERNAL * s->num_cpu;
+ qdev_init_gpio_in(DEVICE(s), handler, i);
+
+ s->parent_irq = g_malloc(s->num_cpu * sizeof(qemu_irq));
+ s->parent_fiq = g_malloc(s->num_cpu * sizeof(qemu_irq));
+
+ for (i = 0; i < s->num_cpu; i++) {
+ sysbus_init_irq(sbd, &s->parent_irq[i]);
+ }
+ for (i = 0; i < s->num_cpu; i++) {
+ sysbus_init_irq(sbd, &s->parent_fiq[i]);
+ }
+
+ memory_region_init_io(&s->iomem_dist, OBJECT(s), ops, s,
+ "gicv3_dist", 0x10000);
+ memory_region_init_io(&s->iomem_redist, OBJECT(s), ops ? &ops[1] : NULL, s,
+ "gicv3_redist", 0x20000 * s->num_cpu);
+
+ sysbus_init_mmio(sbd, &s->iomem_dist);
+ sysbus_init_mmio(sbd, &s->iomem_redist);
+}
+
+static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
+{
+ GICv3State *s = ARM_GICV3_COMMON(dev);
+
+ /* revision property is actually reserved and currently used only in order
+ * to keep the interface compatible with GICv2 code, avoiding extra
+ * conditions. However, in future it could be used, for example, if we
+ * implement GICv4.
+ */
+ if (s->revision != 3) {
+ error_setg(errp, "unsupported GIC revision %d", s->revision);
+ return;
+ }
+}
+
+static void arm_gicv3_common_reset(DeviceState *dev)
+{
+ /* TODO */
+}
+
+static Property arm_gicv3_common_properties[] = {
+ DEFINE_PROP_UINT32("num-cpu", GICv3State, num_cpu, 1),
+ DEFINE_PROP_UINT32("num-irq", GICv3State, num_irq, 32),
+ DEFINE_PROP_UINT32("revision", GICv3State, revision, 3),
+ DEFINE_PROP_BOOL("has-security-extensions", GICv3State, security_extn, 0),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void arm_gicv3_common_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = arm_gicv3_common_reset;
+ dc->realize = arm_gicv3_common_realize;
+ dc->props = arm_gicv3_common_properties;
+ dc->vmsd = &vmstate_gicv3;
+}
+
+static const TypeInfo arm_gicv3_common_type = {
+ .name = TYPE_ARM_GICV3_COMMON,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(GICv3State),
+ .class_size = sizeof(ARMGICv3CommonClass),
+ .class_init = arm_gicv3_common_class_init,
+ .abstract = true,
+};
+
+static void register_types(void)
+{
+ type_register_static(&arm_gicv3_common_type);
+}
+
+type_init(register_types)
diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h
new file mode 100644
index 0000000..f607a30
--- /dev/null
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -0,0 +1,68 @@
+/*
+ * ARM GIC support
+ *
+ * Copyright (c) 2012 Linaro Limited
+ * Copyright (c) 2015 Huawei.
+ * Written by Peter Maydell
+ * Extended to 64 cores by Shlomo Pongratz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef HW_ARM_GICV3_COMMON_H
+#define HW_ARM_GICV3_COMMON_H
+
+#include "hw/sysbus.h"
+#include "hw/intc/arm_gic_common.h"
+
+typedef struct GICv3State {
+ /*< private >*/
+ SysBusDevice parent_obj;
+ /*< public >*/
+
+ qemu_irq *parent_irq;
+ qemu_irq *parent_fiq;
+
+ MemoryRegion iomem_dist; /* Distributor */
+ MemoryRegion iomem_redist; /* Redistributors */
+
+ uint32_t num_cpu;
+ uint32_t num_irq;
+ uint32_t revision;
+ bool security_extn;
+
+ int dev_fd; /* kvm device fd if backed by kvm vgic support */
+} GICv3State;
+
+#define TYPE_ARM_GICV3_COMMON "arm_gicv3_common"
+#define ARM_GICV3_COMMON(obj) \
+ OBJECT_CHECK(GICv3State, (obj), TYPE_ARM_GICV3_COMMON)
+#define ARM_GICV3_COMMON_CLASS(klass) \
+ OBJECT_CLASS_CHECK(ARMGICv3CommonClass, (klass), TYPE_ARM_GICV3_COMMON)
+#define ARM_GICV3_COMMON_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(ARMGICv3CommonClass, (obj), TYPE_ARM_GICV3_COMMON)
+
+typedef struct ARMGICv3CommonClass {
+ /*< private >*/
+ SysBusDeviceClass parent_class;
+ /*< public >*/
+
+ void (*pre_save)(GICv3State *s);
+ void (*post_load)(GICv3State *s);
+} ARMGICv3CommonClass;
+
+void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
+ const MemoryRegionOps *ops);
+
+#endif
--
1.9.5.msysgit.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [Qemu-devel] [PATCH v11 2/5] intc/gic: Extract some reusable vGIC code
2015-08-19 7:23 [Qemu-devel] [PATCH v11 0/5] vGICv3 support Pavel Fedin
2015-08-19 7:23 ` [Qemu-devel] [PATCH v11 1/5] hw/intc: Implement GIC-500 base class Pavel Fedin
@ 2015-08-19 7:23 ` Pavel Fedin
2015-08-19 7:23 ` [Qemu-devel] [PATCH v11 3/5] arm_kvm: Do not assume particular GIC type in kvm_arch_irqchip_create() Pavel Fedin
` (3 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Pavel Fedin @ 2015-08-19 7:23 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Shlomo Pongratz, Shlomo Pongratz, Christoffer Dall,
Eric Auger
Some functions previously used only by vGICv2 are useful also for vGICv3
implementation. Untie them from GICState and make accessible from within
other modules:
- kvm_arm_gic_set_irq()
- kvm_gic_access() - data pointer changed to void * because some GICv3
registers are 64-bit wide
- kvm_gicd_access()
- kvm_gicc_access() - actually GICv2-specific, but changed to keep the
code style unified with kvm_gicd_access()
- kvm_gic_supports_attr() - moved to common code and renamed to
kvm_device_check_attr()
Some of these changes are not used right now, but they will be helpful for
implementing live migration
Actually kvm_dist_get() and kvm_dist_put() could also be made reusable, but
they would require two extra parameters (s->dev_fd and s->num_cpu) as well as
lots of typecasts of 's' to DeviceState * and back to GICState *. This makes
the code very ugly so i decided to stop at this point. I tried also an
approach with making a base class for all possible GICs, but it would contain
only three variables (dev_fd, cpu_num and irq_num), and accessing them through
the rest of the code would be again tedious (either ugly casts or qemu-style
separate object pointer). So i disliked it too.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
---
hw/intc/arm_gic_kvm.c | 46 +++++++++++++++++++-----------------------
hw/intc/vgic_common.h | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++
include/sysemu/kvm.h | 12 +++++++++++
kvm-all.c | 11 +++++++++++
4 files changed, 98 insertions(+), 26 deletions(-)
create mode 100644 hw/intc/vgic_common.h
diff --git a/hw/intc/arm_gic_kvm.c b/hw/intc/arm_gic_kvm.c
index e5d0f67..288248b 100644
--- a/hw/intc/arm_gic_kvm.c
+++ b/hw/intc/arm_gic_kvm.c
@@ -23,6 +23,7 @@
#include "sysemu/kvm.h"
#include "kvm_arm.h"
#include "gic_internal.h"
+#include "vgic_common.h"
//#define DEBUG_GIC_KVM
@@ -52,7 +53,7 @@ typedef struct KVMARMGICClass {
void (*parent_reset)(DeviceState *dev);
} KVMARMGICClass;
-static void kvm_arm_gic_set_irq(void *opaque, int irq, int level)
+void kvm_arm_gic_set_irq(uint32_t num_irq, int irq, int level)
{
/* Meaning of the 'irq' parameter:
* [0..N-1] : external interrupts
@@ -63,10 +64,9 @@ static void kvm_arm_gic_set_irq(void *opaque, int irq, int level)
* has separate fields in the irq number for type,
* CPU number and interrupt number.
*/
- GICState *s = (GICState *)opaque;
int kvm_irq, irqtype, cpu;
- if (irq < (s->num_irq - GIC_INTERNAL)) {
+ if (irq < (num_irq - GIC_INTERNAL)) {
/* External interrupt. The kernel numbers these like the GIC
* hardware, with external interrupt IDs starting after the
* internal ones.
@@ -77,7 +77,7 @@ static void kvm_arm_gic_set_irq(void *opaque, int irq, int level)
} else {
/* Internal interrupt: decode into (cpu, interrupt id) */
irqtype = KVM_ARM_IRQ_TYPE_PPI;
- irq -= (s->num_irq - GIC_INTERNAL);
+ irq -= (num_irq - GIC_INTERNAL);
cpu = irq / GIC_INTERNAL;
irq %= GIC_INTERNAL;
}
@@ -87,6 +87,13 @@ static void kvm_arm_gic_set_irq(void *opaque, int irq, int level)
kvm_set_irq(kvm_state, kvm_irq, !!level);
}
+static void kvm_arm_gicv2_set_irq(void *opaque, int irq, int level)
+{
+ GICState *s = (GICState *)opaque;
+
+ kvm_arm_gic_set_irq(s->num_irq, irq, level);
+}
+
static bool kvm_arm_gic_can_save_restore(GICState *s)
{
return s->dev_fd >= 0;
@@ -107,8 +114,8 @@ static bool kvm_gic_supports_attr(GICState *s, int group, int attrnum)
return kvm_device_ioctl(s->dev_fd, KVM_HAS_DEVICE_ATTR, &attr) == 0;
}
-static void kvm_gic_access(GICState *s, int group, int offset,
- int cpu, uint32_t *val, bool write)
+void kvm_gic_access(int dev_fd, int group, int offset,
+ int cpu, void *val, bool write)
{
struct kvm_device_attr attr;
int type;
@@ -130,7 +137,7 @@ static void kvm_gic_access(GICState *s, int group, int offset,
type = KVM_GET_DEVICE_ATTR;
}
- err = kvm_device_ioctl(s->dev_fd, type, &attr);
+ err = kvm_device_ioctl(dev_fd, type, &attr);
if (err < 0) {
fprintf(stderr, "KVM_{SET/GET}_DEVICE_ATTR failed: %s\n",
strerror(-err));
@@ -138,20 +145,6 @@ static void kvm_gic_access(GICState *s, int group, int offset,
}
}
-static void kvm_gicd_access(GICState *s, int offset, int cpu,
- uint32_t *val, bool write)
-{
- kvm_gic_access(s, KVM_DEV_ARM_VGIC_GRP_DIST_REGS,
- offset, cpu, val, write);
-}
-
-static void kvm_gicc_access(GICState *s, int offset, int cpu,
- uint32_t *val, bool write)
-{
- kvm_gic_access(s, KVM_DEV_ARM_VGIC_GRP_CPU_REGS,
- offset, cpu, val, write);
-}
-
#define for_each_irq_reg(_ctr, _max_irq, _field_width) \
for (_ctr = 0; _ctr < ((_max_irq) / (32 / (_field_width))); _ctr++)
@@ -559,7 +552,7 @@ static void kvm_arm_gic_realize(DeviceState *dev, Error **errp)
return;
}
- gic_init_irqs_and_mmio(s, kvm_arm_gic_set_irq, NULL);
+ gic_init_irqs_and_mmio(s, kvm_arm_gicv2_set_irq, NULL);
for (i = 0; i < s->num_irq - GIC_INTERNAL; i++) {
qemu_irq irq = qdev_get_gpio_in(dev, i);
@@ -576,15 +569,16 @@ static void kvm_arm_gic_realize(DeviceState *dev, Error **errp)
return;
}
- if (kvm_gic_supports_attr(s, KVM_DEV_ARM_VGIC_GRP_NR_IRQS, 0)) {
+ if (kvm_device_check_attr(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_NR_IRQS, 0)) {
uint32_t numirqs = s->num_irq;
- kvm_gic_access(s, KVM_DEV_ARM_VGIC_GRP_NR_IRQS, 0, 0, &numirqs, 1);
+ kvm_gic_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_NR_IRQS, 0, 0,
+ &numirqs, 1);
}
/* Tell the kernel to complete VGIC initialization now */
- if (kvm_gic_supports_attr(s, KVM_DEV_ARM_VGIC_GRP_CTRL,
+ if (kvm_device_check_attr(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CTRL,
KVM_DEV_ARM_VGIC_CTRL_INIT)) {
- kvm_gic_access(s, KVM_DEV_ARM_VGIC_GRP_CTRL,
+ kvm_gic_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CTRL,
KVM_DEV_ARM_VGIC_CTRL_INIT, 0, 0, 1);
}
diff --git a/hw/intc/vgic_common.h b/hw/intc/vgic_common.h
new file mode 100644
index 0000000..130ea64
--- /dev/null
+++ b/hw/intc/vgic_common.h
@@ -0,0 +1,55 @@
+/*
+ * ARM KVM vGIC utility functions
+ *
+ * Copyright (c) 2015 Samsung Electronics
+ * Written by Pavel Fedin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef QEMU_ARM_VGIC_COMMON_H
+#define QEMU_ARM_VGIC_COMMON_H
+
+/**
+ * kvm_arm_gic_set_irq - Send an IRQ to the in-kernel vGIC
+ * @num_irq: Total number of IRQs configured for the GIC instance
+ * @irq: qemu internal IRQ line number:
+ * [0..N-1] : external interrupts
+ * [N..N+31] : PPI (internal) interrupts for CPU 0
+ * [N+32..N+63] : PPI (internal interrupts for CPU 1
+ * @level: level of the IRQ line.
+ */
+void kvm_arm_gic_set_irq(uint32_t num_irq, int irq, int level);
+
+/**
+ * kvm_gic_access - Read or write vGIC memory-mapped register
+ * @dev_fd: fd of the device to act on
+ * @group: ID of the memory-mapped region
+ * @offset: offset within the region
+ * @cpu: vCPU number
+ * @val: pointer to the storage area for the data
+ * @write - true for writing and false for reading
+ */
+void kvm_gic_access(int dev_fd, int group, int offset, int cpu,
+ void *val, bool write);
+
+#define kvm_gicd_access(s, offset, cpu, val, write) \
+ kvm_gic_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_DIST_REGS, \
+ offset, cpu, val, write)
+
+#define kvm_gicc_access(s, offset, cpu, val, write) \
+ kvm_gic_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CPU_REGS, \
+ offset, cpu, val, write)
+
+#endif
diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
index 983e99e..80ce609 100644
--- a/include/sysemu/kvm.h
+++ b/include/sysemu/kvm.h
@@ -240,6 +240,18 @@ int kvm_device_ioctl(int fd, int type, ...);
int kvm_vm_check_attr(KVMState *s, uint32_t group, uint64_t attr);
/**
+ * kvm_device_check_attr - check for existence of a specific vm attribute
+ * @fd: The device file descriptor
+ * @group: the group
+ * @attr: the attribute of that group to query for
+ *
+ * Returns: 1 if the attribute exists
+ * 0 if the attribute either does not exist or if the vm device
+ * interface is unavailable
+ */
+int kvm_device_check_attr(int fd, uint32_t group, uint64_t attr);
+
+/**
* kvm_create_device - create a KVM device for the device control API
* @KVMState: The KVMState pointer
* @type: The KVM device type (see Documentation/virtual/kvm/devices in the
diff --git a/kvm-all.c b/kvm-all.c
index 06e06f2..d3d77c8 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -2003,6 +2003,17 @@ int kvm_vm_check_attr(KVMState *s, uint32_t group, uint64_t attr)
return ret ? 0 : 1;
}
+int kvm_device_check_attr(int dev_fd, uint32_t group, uint64_t attr)
+{
+ struct kvm_device_attr attribute = {
+ .group = group,
+ .attr = attr,
+ .flags = 0,
+ };
+
+ return kvm_device_ioctl(dev_fd, KVM_HAS_DEVICE_ATTR, &attribute) ? 0 : 1;
+}
+
int kvm_has_sync_mmu(void)
{
return kvm_check_extension(kvm_state, KVM_CAP_SYNC_MMU);
--
1.9.5.msysgit.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [Qemu-devel] [PATCH v11 3/5] arm_kvm: Do not assume particular GIC type in kvm_arch_irqchip_create()
2015-08-19 7:23 [Qemu-devel] [PATCH v11 0/5] vGICv3 support Pavel Fedin
2015-08-19 7:23 ` [Qemu-devel] [PATCH v11 1/5] hw/intc: Implement GIC-500 base class Pavel Fedin
2015-08-19 7:23 ` [Qemu-devel] [PATCH v11 2/5] intc/gic: Extract some reusable vGIC code Pavel Fedin
@ 2015-08-19 7:23 ` Pavel Fedin
2015-08-19 7:23 ` [Qemu-devel] [PATCH v11 4/5] hw/intc: Initial implementation of vGICv3 Pavel Fedin
` (2 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Pavel Fedin @ 2015-08-19 7:23 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Shlomo Pongratz, Shlomo Pongratz, Christoffer Dall,
Eric Auger
This allows to use different GIC types from v2. There are no kernels which
could advertise KVM_CAP_DEVICE_CTRL without the actual ability to create
GIC with it.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
---
target-arm/kvm.c | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)
diff --git a/target-arm/kvm.c b/target-arm/kvm.c
index b278542..22383c5 100644
--- a/target-arm/kvm.c
+++ b/target-arm/kvm.c
@@ -585,18 +585,10 @@ void kvm_arch_init_irq_routing(KVMState *s)
int kvm_arch_irqchip_create(KVMState *s)
{
- int ret;
-
/* If we can create the VGIC using the newer device control API, we
* let the device do this when it initializes itself, otherwise we
* fall back to the old API */
-
- ret = kvm_create_device(s, KVM_DEV_TYPE_ARM_VGIC_V2, true);
- if (ret == 0) {
- return 1;
- }
-
- return 0;
+ return kvm_check_extension(s, KVM_CAP_DEVICE_CTRL);
}
int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
--
1.9.5.msysgit.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [Qemu-devel] [PATCH v11 4/5] hw/intc: Initial implementation of vGICv3
2015-08-19 7:23 [Qemu-devel] [PATCH v11 0/5] vGICv3 support Pavel Fedin
` (2 preceding siblings ...)
2015-08-19 7:23 ` [Qemu-devel] [PATCH v11 3/5] arm_kvm: Do not assume particular GIC type in kvm_arch_irqchip_create() Pavel Fedin
@ 2015-08-19 7:23 ` Pavel Fedin
2015-08-19 7:23 ` [Qemu-devel] [PATCH v11 5/5] hw/arm/virt: Add gic-version option to virt machine Pavel Fedin
2015-08-25 13:31 ` [Qemu-devel] [PATCH v11 0/5] vGICv3 support Ashok Kumar
5 siblings, 0 replies; 9+ messages in thread
From: Pavel Fedin @ 2015-08-19 7:23 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Shlomo Pongratz, Shlomo Pongratz, Christoffer Dall,
Eric Auger
This is the initial version of KVM-accelerated GICv3 support.
State load and save are not yet supported, live migration is
not possible.
In order to get correct class name in a simpler way, gicv3_class_name()
function is implemented, similar to gic_class_name().
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/intc/Makefile.objs | 1 +
hw/intc/arm_gicv3_kvm.c | 149 ++++++++++++++++++++++++++++++++++++++++++++++++
target-arm/kvm_arm.h | 10 ++++
target-arm/machine.c | 18 ++++++
4 files changed, 178 insertions(+)
create mode 100644 hw/intc/arm_gicv3_kvm.c
diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs
index 1317e5a..004b0c2 100644
--- a/hw/intc/Makefile.objs
+++ b/hw/intc/Makefile.objs
@@ -17,6 +17,7 @@ common-obj-$(CONFIG_OPENPIC) += openpic.o
obj-$(CONFIG_APIC) += apic.o apic_common.o
obj-$(CONFIG_ARM_GIC_KVM) += arm_gic_kvm.o
+obj-$(call land,$(CONFIG_ARM_GIC_KVM),$(TARGET_AARCH64)) += arm_gicv3_kvm.o
obj-$(CONFIG_STELLARIS) += armv7m_nvic.o
obj-$(CONFIG_EXYNOS4) += exynos4210_gic.o exynos4210_combiner.o
obj-$(CONFIG_GRLIB) += grlib_irqmp.o
diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c
new file mode 100644
index 0000000..8070a2a
--- /dev/null
+++ b/hw/intc/arm_gicv3_kvm.c
@@ -0,0 +1,149 @@
+/*
+ * ARM Generic Interrupt Controller using KVM in-kernel support
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Written by Pavel Fedin
+ * Based on vGICv2 code by Peter Maydell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "hw/intc/arm_gicv3_common.h"
+#include "hw/sysbus.h"
+#include "sysemu/kvm.h"
+#include "kvm_arm.h"
+#include "vgic_common.h"
+
+#ifdef DEBUG_GICV3_KVM
+#define DPRINTF(fmt, ...) \
+ do { fprintf(stderr, "kvm_gicv3: " fmt, ## __VA_ARGS__); } while (0)
+#else
+#define DPRINTF(fmt, ...) \
+ do { } while (0)
+#endif
+
+#define TYPE_KVM_ARM_GICV3 "kvm-arm-gicv3"
+#define KVM_ARM_GICV3(obj) \
+ OBJECT_CHECK(GICv3State, (obj), TYPE_KVM_ARM_GICV3)
+#define KVM_ARM_GICV3_CLASS(klass) \
+ OBJECT_CLASS_CHECK(KVMARMGICv3Class, (klass), TYPE_KVM_ARM_GICV3)
+#define KVM_ARM_GICV3_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(KVMARMGICv3Class, (obj), TYPE_KVM_ARM_GICV3)
+
+typedef struct KVMARMGICv3Class {
+ ARMGICv3CommonClass parent_class;
+ DeviceRealize parent_realize;
+ void (*parent_reset)(DeviceState *dev);
+} KVMARMGICv3Class;
+
+static void kvm_arm_gicv3_set_irq(void *opaque, int irq, int level)
+{
+ GICv3State *s = (GICv3State *)opaque;
+
+ kvm_arm_gic_set_irq(s->num_irq, irq, level);
+}
+
+static void kvm_arm_gicv3_put(GICv3State *s)
+{
+ /* TODO */
+ DPRINTF("Cannot put kernel gic state, no kernel interface\n");
+}
+
+static void kvm_arm_gicv3_get(GICv3State *s)
+{
+ /* TODO */
+ DPRINTF("Cannot get kernel gic state, no kernel interface\n");
+}
+
+static void kvm_arm_gicv3_reset(DeviceState *dev)
+{
+ GICv3State *s = ARM_GICV3_COMMON(dev);
+ KVMARMGICv3Class *kgc = KVM_ARM_GICV3_GET_CLASS(s);
+
+ DPRINTF("Reset\n");
+
+ kgc->parent_reset(dev);
+ kvm_arm_gicv3_put(s);
+}
+
+static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp)
+{
+ GICv3State *s = KVM_ARM_GICV3(dev);
+ KVMARMGICv3Class *kgc = KVM_ARM_GICV3_GET_CLASS(s);
+ Error *local_err = NULL;
+
+ DPRINTF("kvm_arm_gicv3_realize\n");
+
+ kgc->parent_realize(dev, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+
+ if (s->security_extn) {
+ error_setg(errp, "the in-kernel VGICv3 does not implement the "
+ "security extensions");
+ return;
+ }
+
+ gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL);
+
+ /* Try to create the device via the device control API */
+ s->dev_fd = kvm_create_device(kvm_state, KVM_DEV_TYPE_ARM_VGIC_V3, false);
+ if (s->dev_fd < 0) {
+ error_setg_errno(errp, -s->dev_fd, "error creating in-kernel VGIC");
+ return;
+ }
+
+ kvm_gic_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_NR_IRQS,
+ 0, 0, &s->num_irq, 1);
+
+ /* Tell the kernel to complete VGIC initialization now */
+ kvm_gic_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CTRL,
+ KVM_DEV_ARM_VGIC_CTRL_INIT, 0, 0, 1);
+
+ kvm_arm_register_device(&s->iomem_dist, -1, KVM_DEV_ARM_VGIC_GRP_ADDR,
+ KVM_VGIC_V3_ADDR_TYPE_DIST, s->dev_fd);
+ kvm_arm_register_device(&s->iomem_redist, -1, KVM_DEV_ARM_VGIC_GRP_ADDR,
+ KVM_VGIC_V3_ADDR_TYPE_REDIST, s->dev_fd);
+}
+
+static void kvm_arm_gicv3_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ ARMGICv3CommonClass *agcc = ARM_GICV3_COMMON_CLASS(klass);
+ KVMARMGICv3Class *kgc = KVM_ARM_GICV3_CLASS(klass);
+
+ agcc->pre_save = kvm_arm_gicv3_get;
+ agcc->post_load = kvm_arm_gicv3_put;
+ kgc->parent_realize = dc->realize;
+ kgc->parent_reset = dc->reset;
+ dc->realize = kvm_arm_gicv3_realize;
+ dc->reset = kvm_arm_gicv3_reset;
+}
+
+static const TypeInfo kvm_arm_gicv3_info = {
+ .name = TYPE_KVM_ARM_GICV3,
+ .parent = TYPE_ARM_GICV3_COMMON,
+ .instance_size = sizeof(GICv3State),
+ .class_init = kvm_arm_gicv3_class_init,
+ .class_size = sizeof(KVMARMGICv3Class),
+};
+
+static void kvm_arm_gicv3_register_types(void)
+{
+ type_register_static(&kvm_arm_gicv3_info);
+}
+
+type_init(kvm_arm_gicv3_register_types)
diff --git a/target-arm/kvm_arm.h b/target-arm/kvm_arm.h
index b3e0ab7..b6f5b69 100644
--- a/target-arm/kvm_arm.h
+++ b/target-arm/kvm_arm.h
@@ -196,4 +196,14 @@ static inline const char *gic_class_name(void)
return kvm_irqchip_in_kernel() ? "kvm-arm-gic" : "arm_gic";
}
+/**
+ * gicv3_class_name
+ *
+ * Return name of GICv3 class to use depending on whether KVM acceleration is
+ * in use. May throw an error if the chosen implementation is not available.
+ *
+ * Returns: class name to use
+ */
+const char *gicv3_class_name(void);
+
#endif
diff --git a/target-arm/machine.c b/target-arm/machine.c
index 32adfe7..36a0d15 100644
--- a/target-arm/machine.c
+++ b/target-arm/machine.c
@@ -1,5 +1,6 @@
#include "hw/hw.h"
#include "hw/boards.h"
+#include "qemu/error-report.h"
#include "sysemu/kvm.h"
#include "kvm_arm.h"
#include "internals.h"
@@ -328,3 +329,20 @@ const VMStateDescription vmstate_arm_cpu = {
NULL
}
};
+
+const char *gicv3_class_name(void)
+{
+ if (kvm_irqchip_in_kernel()) {
+#ifdef TARGET_AARCH64
+ return "kvm-arm-gicv3";
+#else
+ error_report("KVM GICv3 acceleration is not supported on this "
+ "platform\n");
+#endif
+ } else {
+ /* TODO: Software emulation is not implemented yet */
+ error_report("KVM is currently required for GICv3 emulation\n");
+ }
+
+ exit(1);
+}
--
1.9.5.msysgit.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [Qemu-devel] [PATCH v11 5/5] hw/arm/virt: Add gic-version option to virt machine
2015-08-19 7:23 [Qemu-devel] [PATCH v11 0/5] vGICv3 support Pavel Fedin
` (3 preceding siblings ...)
2015-08-19 7:23 ` [Qemu-devel] [PATCH v11 4/5] hw/intc: Initial implementation of vGICv3 Pavel Fedin
@ 2015-08-19 7:23 ` Pavel Fedin
2015-08-25 13:40 ` Ashok Kumar
[not found] ` <"20150825134053.GB27329@ashoks"@broadcom.com>
2015-08-25 13:31 ` [Qemu-devel] [PATCH v11 0/5] vGICv3 support Ashok Kumar
5 siblings, 2 replies; 9+ messages in thread
From: Pavel Fedin @ 2015-08-19 7:23 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Shlomo Pongratz, Shlomo Pongratz, Christoffer Dall,
Eric Auger
Add gic_version to VirtMachineState, set it to value of the option
and pass it around where necessary. Instantiate devices and fdt
nodes according to the choice.
max_cpus for virt machine increased to 126 (calculated from redistributor
space available in the memory map). GICv2 compatibility check happens
inside arm_gic_common_realize().
ITS regions are added to the memory map too, however currently they
are not used, just reserved.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
---
hw/arm/virt.c | 111 +++++++++++++++++++++++++++++++++++++++++---------
include/hw/arm/fdt.h | 2 +-
include/hw/arm/virt.h | 5 ++-
3 files changed, 96 insertions(+), 22 deletions(-)
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index d5a8417..e090640 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -50,6 +50,7 @@
#include "hw/arm/fdt.h"
#include "hw/intc/arm_gic_common.h"
#include "kvm_arm.h"
+#include "qapi/visitor.h"
/* Number of external interrupt lines to configure the GIC with */
#define NUM_IRQS 256
@@ -79,6 +80,7 @@ typedef struct {
typedef struct {
MachineState parent;
bool secure;
+ int32_t gic_version;
} VirtMachineState;
#define TYPE_VIRT_MACHINE "virt"
@@ -109,6 +111,9 @@ static const MemMapEntry a15memmap[] = {
[VIRT_GIC_DIST] = { 0x08000000, 0x00010000 },
[VIRT_GIC_CPU] = { 0x08010000, 0x00010000 },
[VIRT_GIC_V2M] = { 0x08020000, 0x00001000 },
+ [VIRT_ITS_CONTROL] = { 0x08020000, 0x00010000 },
+ [VIRT_ITS_TRANSLATION] = { 0x08030000, 0x00010000 },
+ [VIRT_GIC_REDIST] = { 0x08040000, 0x00FC0000 },
[VIRT_UART] = { 0x09000000, 0x00001000 },
[VIRT_RTC] = { 0x09010000, 0x00001000 },
[VIRT_FW_CFG] = { 0x09020000, 0x0000000a },
@@ -258,10 +263,13 @@ static void fdt_add_timer_nodes(const VirtBoardInfo *vbi)
* they are edge-triggered.
*/
ARMCPU *armcpu;
+ uint32_t max;
uint32_t irqflags = GIC_FDT_IRQ_FLAGS_EDGE_LO_HI;
+ /* Argument is 32 bit but 8 bits are reserved for flags */
+ max = (vbi->smp_cpus >= 24) ? 24 : vbi->smp_cpus;
irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START,
- GIC_FDT_IRQ_PPI_CPU_WIDTH, (1 << vbi->smp_cpus) - 1);
+ GIC_FDT_IRQ_PPI_CPU_WIDTH, (1 << max) - 1);
qemu_fdt_add_subnode(vbi->fdt, "/timer");
@@ -285,6 +293,18 @@ static void fdt_add_cpu_nodes(const VirtBoardInfo *vbi)
{
int cpu;
+ /*
+ * From Documentation/devicetree/bindings/arm/cpus.txt
+ * On ARM v8 64-bit systems value should be set to 2,
+ * that corresponds to the MPIDR_EL1 register size.
+ * If MPIDR_EL1[63:32] value is equal to 0 on all CPUs
+ * in the system, #address-cells can be set to 1, since
+ * MPIDR_EL1[63:32] bits are not used for CPUs
+ * identification.
+ *
+ * Now GIC500 doesn't support affinities 2 & 3 so currently
+ * #address-cells can stay 1 until future GIC
+ */
qemu_fdt_add_subnode(vbi->fdt, "/cpus");
qemu_fdt_setprop_cell(vbi->fdt, "/cpus", "#address-cells", 0x1);
qemu_fdt_setprop_cell(vbi->fdt, "/cpus", "#size-cells", 0x0);
@@ -321,25 +341,36 @@ static void fdt_add_v2m_gic_node(VirtBoardInfo *vbi)
qemu_fdt_setprop_cell(vbi->fdt, "/intc/v2m", "phandle", vbi->v2m_phandle);
}
-static void fdt_add_gic_node(VirtBoardInfo *vbi)
+static void fdt_add_gic_node(VirtBoardInfo *vbi, int type)
{
vbi->gic_phandle = qemu_fdt_alloc_phandle(vbi->fdt);
qemu_fdt_setprop_cell(vbi->fdt, "/", "interrupt-parent", vbi->gic_phandle);
qemu_fdt_add_subnode(vbi->fdt, "/intc");
- /* 'cortex-a15-gic' means 'GIC v2' */
- qemu_fdt_setprop_string(vbi->fdt, "/intc", "compatible",
- "arm,cortex-a15-gic");
qemu_fdt_setprop_cell(vbi->fdt, "/intc", "#interrupt-cells", 3);
qemu_fdt_setprop(vbi->fdt, "/intc", "interrupt-controller", NULL, 0);
- qemu_fdt_setprop_sized_cells(vbi->fdt, "/intc", "reg",
- 2, vbi->memmap[VIRT_GIC_DIST].base,
- 2, vbi->memmap[VIRT_GIC_DIST].size,
- 2, vbi->memmap[VIRT_GIC_CPU].base,
- 2, vbi->memmap[VIRT_GIC_CPU].size);
qemu_fdt_setprop_cell(vbi->fdt, "/intc", "#address-cells", 0x2);
qemu_fdt_setprop_cell(vbi->fdt, "/intc", "#size-cells", 0x2);
qemu_fdt_setprop(vbi->fdt, "/intc", "ranges", NULL, 0);
+ if (type == 3) {
+ qemu_fdt_setprop_string(vbi->fdt, "/intc", "compatible",
+ "arm,gic-v3");
+ qemu_fdt_setprop_sized_cells(vbi->fdt, "/intc", "reg",
+ 2, vbi->memmap[VIRT_GIC_DIST].base,
+ 2, vbi->memmap[VIRT_GIC_DIST].size,
+ 2, vbi->memmap[VIRT_GIC_REDIST].base,
+ 2, vbi->memmap[VIRT_GIC_REDIST].size);
+ } else {
+ /* 'cortex-a15-gic' means 'GIC v2' */
+ qemu_fdt_setprop_string(vbi->fdt, "/intc", "compatible",
+ "arm,cortex-a15-gic");
+ qemu_fdt_setprop_sized_cells(vbi->fdt, "/intc", "reg",
+ 2, vbi->memmap[VIRT_GIC_DIST].base,
+ 2, vbi->memmap[VIRT_GIC_DIST].size,
+ 2, vbi->memmap[VIRT_GIC_CPU].base,
+ 2, vbi->memmap[VIRT_GIC_CPU].size);
+ }
+
qemu_fdt_setprop_cell(vbi->fdt, "/intc", "phandle", vbi->gic_phandle);
}
@@ -362,18 +393,18 @@ static void create_v2m(VirtBoardInfo *vbi, qemu_irq *pic)
fdt_add_v2m_gic_node(vbi);
}
-static void create_gic(VirtBoardInfo *vbi, qemu_irq *pic)
+static void create_gic(VirtBoardInfo *vbi, qemu_irq *pic, int type)
{
- /* We create a standalone GIC v2 */
+ /* We create a standalone GIC */
DeviceState *gicdev;
SysBusDevice *gicbusdev;
const char *gictype;
int i;
- gictype = gic_class_name();
+ gictype = (type == 3) ? gicv3_class_name() : gic_class_name();
gicdev = qdev_create(NULL, gictype);
- qdev_prop_set_uint32(gicdev, "revision", 2);
+ qdev_prop_set_uint32(gicdev, "revision", type);
qdev_prop_set_uint32(gicdev, "num-cpu", smp_cpus);
/* Note that the num-irq property counts both internal and external
* interrupts; there are always 32 of the former (mandated by GIC spec).
@@ -382,7 +413,11 @@ static void create_gic(VirtBoardInfo *vbi, qemu_irq *pic)
qdev_init_nofail(gicdev);
gicbusdev = SYS_BUS_DEVICE(gicdev);
sysbus_mmio_map(gicbusdev, 0, vbi->memmap[VIRT_GIC_DIST].base);
- sysbus_mmio_map(gicbusdev, 1, vbi->memmap[VIRT_GIC_CPU].base);
+ if (type == 3) {
+ sysbus_mmio_map(gicbusdev, 1, vbi->memmap[VIRT_GIC_REDIST].base);
+ } else {
+ sysbus_mmio_map(gicbusdev, 1, vbi->memmap[VIRT_GIC_CPU].base);
+ }
/* Wire the outputs from each CPU's generic timer to the
* appropriate GIC PPI inputs, and the GIC's IRQ output to
@@ -417,9 +452,11 @@ static void create_gic(VirtBoardInfo *vbi, qemu_irq *pic)
pic[i] = qdev_get_gpio_in(gicdev, i);
}
- fdt_add_gic_node(vbi);
+ fdt_add_gic_node(vbi, type);
- create_v2m(vbi, pic);
+ if (type == 2) {
+ create_v2m(vbi, pic);
+ }
}
static void create_uart(const VirtBoardInfo *vbi, qemu_irq *pic)
@@ -723,7 +760,10 @@ static void create_pcie(const VirtBoardInfo *vbi, qemu_irq *pic)
qemu_fdt_setprop_cells(vbi->fdt, nodename, "bus-range", 0,
nr_pcie_buses - 1);
- qemu_fdt_setprop_cells(vbi->fdt, nodename, "msi-parent", vbi->v2m_phandle);
+ if (vbi->v2m_phandle) {
+ qemu_fdt_setprop_cells(vbi->fdt, nodename, "msi-parent",
+ vbi->v2m_phandle);
+ }
qemu_fdt_setprop_sized_cells(vbi->fdt, nodename, "reg",
2, base_ecam, 2, size_ecam);
@@ -883,7 +923,7 @@ static void machvirt_init(MachineState *machine)
create_flash(vbi);
- create_gic(vbi, pic);
+ create_gic(vbi, pic, vms->gic_version);
create_uart(vbi, pic);
@@ -941,6 +981,26 @@ static void virt_set_secure(Object *obj, bool value, Error **errp)
vms->secure = value;
}
+static void virt_get_gic_version(Object *obj, Visitor *v, void *opaque,
+ const char *name, Error **errp)
+{
+ VirtMachineState *vms = VIRT_MACHINE(obj);
+
+ visit_type_int32(v, &vms->gic_version, name, errp);
+}
+
+static void virt_set_gic_version(Object *obj, Visitor *v, void *opaque,
+ const char *name, Error **errp)
+{
+ VirtMachineState *vms = VIRT_MACHINE(obj);
+
+ visit_type_int32(v, &vms->gic_version, name, errp);
+ if (vms->gic_version != 2 && vms->gic_version != 3) {
+ error_report ("Only GICv2 and GICv3 supported currently\n");
+ exit(1);
+ }
+}
+
static void virt_instance_init(Object *obj)
{
VirtMachineState *vms = VIRT_MACHINE(obj);
@@ -953,6 +1013,14 @@ static void virt_instance_init(Object *obj)
"Set on/off to enable/disable the ARM "
"Security Extensions (TrustZone)",
NULL);
+
+ /* Default GIC type is v2 */
+ vms->gic_version = 2;
+ object_property_add(obj, "gic-version", "int", virt_get_gic_version,
+ virt_set_gic_version, NULL, NULL, NULL);
+ object_property_set_description(obj, "gic-version",
+ "Set GIC version. "
+ "Valid values are 2 and 3", NULL);
}
static void virt_class_init(ObjectClass *oc, void *data)
@@ -962,7 +1030,10 @@ static void virt_class_init(ObjectClass *oc, void *data)
mc->name = TYPE_VIRT_MACHINE;
mc->desc = "ARM Virtual Machine",
mc->init = machvirt_init;
- mc->max_cpus = 8;
+ /* Our maximum number of CPUs depends on how many redistributors
+ * we can fit into memory map
+ */
+ mc->max_cpus = a15memmap[VIRT_GIC_REDIST].size / 0x20000;
mc->has_dynamic_sysbus = true;
mc->block_default_type = IF_VIRTIO;
mc->no_cdrom = 1;
diff --git a/include/hw/arm/fdt.h b/include/hw/arm/fdt.h
index c3d5015..dd794dd 100644
--- a/include/hw/arm/fdt.h
+++ b/include/hw/arm/fdt.h
@@ -29,6 +29,6 @@
#define GIC_FDT_IRQ_FLAGS_LEVEL_LO 8
#define GIC_FDT_IRQ_PPI_CPU_START 8
-#define GIC_FDT_IRQ_PPI_CPU_WIDTH 8
+#define GIC_FDT_IRQ_PPI_CPU_WIDTH 24
#endif
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index d22fd8e..6c5a9c9 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -46,6 +46,10 @@ enum {
VIRT_CPUPERIPHS,
VIRT_GIC_DIST,
VIRT_GIC_CPU,
+ VIRT_GIC_V2M,
+ VIRT_ITS_CONTROL,
+ VIRT_ITS_TRANSLATION,
+ VIRT_GIC_REDIST,
VIRT_UART,
VIRT_MMIO,
VIRT_RTC,
@@ -54,7 +58,6 @@ enum {
VIRT_PCIE_MMIO,
VIRT_PCIE_PIO,
VIRT_PCIE_ECAM,
- VIRT_GIC_V2M,
VIRT_PLATFORM_BUS,
};
--
1.9.5.msysgit.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [Qemu-devel] [PATCH v11 5/5] hw/arm/virt: Add gic-version option to virt machine
2015-08-19 7:23 ` [Qemu-devel] [PATCH v11 5/5] hw/arm/virt: Add gic-version option to virt machine Pavel Fedin
@ 2015-08-25 13:40 ` Ashok Kumar
[not found] ` <"20150825134053.GB27329@ashoks"@broadcom.com>
1 sibling, 0 replies; 9+ messages in thread
From: Ashok Kumar @ 2015-08-25 13:40 UTC (permalink / raw)
To: Pavel Fedin
Cc: Peter Maydell, Eric Auger, Shlomo Pongratz, Shlomo Pongratz,
qemu-devel, Christoffer Dall
On Wed, Aug 19, 2015 at 10:23:26AM +0300, Pavel Fedin wrote:
> Add gic_version to VirtMachineState, set it to value of the option
> and pass it around where necessary. Instantiate devices and fdt
> nodes according to the choice.
>
> max_cpus for virt machine increased to 126 (calculated from redistributor
> space available in the memory map). GICv2 compatibility check happens
> inside arm_gic_common_realize().
>
> ITS regions are added to the memory map too, however currently they
> are not used, just reserved.
>
> Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
> ---
> hw/arm/virt.c | 111 +++++++++++++++++++++++++++++++++++++++++---------
> include/hw/arm/fdt.h | 2 +-
> include/hw/arm/virt.h | 5 ++-
> 3 files changed, 96 insertions(+), 22 deletions(-)
>
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index d5a8417..e090640 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -50,6 +50,7 @@
> #include "hw/arm/fdt.h"
> #include "hw/intc/arm_gic_common.h"
> #include "kvm_arm.h"
> +#include "qapi/visitor.h"
>
> /* Number of external interrupt lines to configure the GIC with */
> #define NUM_IRQS 256
> @@ -79,6 +80,7 @@ typedef struct {
> typedef struct {
> MachineState parent;
> bool secure;
> + int32_t gic_version;
> } VirtMachineState;
>
> #define TYPE_VIRT_MACHINE "virt"
> @@ -109,6 +111,9 @@ static const MemMapEntry a15memmap[] = {
> [VIRT_GIC_DIST] = { 0x08000000, 0x00010000 },
> [VIRT_GIC_CPU] = { 0x08010000, 0x00010000 },
> [VIRT_GIC_V2M] = { 0x08020000, 0x00001000 },
> + [VIRT_ITS_CONTROL] = { 0x08020000, 0x00010000 },
> + [VIRT_ITS_TRANSLATION] = { 0x08030000, 0x00010000 },
> + [VIRT_GIC_REDIST] = { 0x08040000, 0x00FC0000 },
> [VIRT_UART] = { 0x09000000, 0x00001000 },
> [VIRT_RTC] = { 0x09010000, 0x00001000 },
> [VIRT_FW_CFG] = { 0x09020000, 0x0000000a },
> @@ -258,10 +263,13 @@ static void fdt_add_timer_nodes(const VirtBoardInfo *vbi)
> * they are edge-triggered.
> */
> ARMCPU *armcpu;
> + uint32_t max;
> uint32_t irqflags = GIC_FDT_IRQ_FLAGS_EDGE_LO_HI;
>
> + /* Argument is 32 bit but 8 bits are reserved for flags */
> + max = (vbi->smp_cpus >= 24) ? 24 : vbi->smp_cpus;
> irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START,
> - GIC_FDT_IRQ_PPI_CPU_WIDTH, (1 << vbi->smp_cpus) - 1);
> + GIC_FDT_IRQ_PPI_CPU_WIDTH, (1 << max) - 1);
>
> qemu_fdt_add_subnode(vbi->fdt, "/timer");
>
> @@ -285,6 +293,18 @@ static void fdt_add_cpu_nodes(const VirtBoardInfo *vbi)
> {
> int cpu;
>
> + /*
> + * From Documentation/devicetree/bindings/arm/cpus.txt
> + * On ARM v8 64-bit systems value should be set to 2,
> + * that corresponds to the MPIDR_EL1 register size.
> + * If MPIDR_EL1[63:32] value is equal to 0 on all CPUs
> + * in the system, #address-cells can be set to 1, since
> + * MPIDR_EL1[63:32] bits are not used for CPUs
> + * identification.
> + *
> + * Now GIC500 doesn't support affinities 2 & 3 so currently
> + * #address-cells can stay 1 until future GIC
> + */
> qemu_fdt_add_subnode(vbi->fdt, "/cpus");
> qemu_fdt_setprop_cell(vbi->fdt, "/cpus", "#address-cells", 0x1);
> qemu_fdt_setprop_cell(vbi->fdt, "/cpus", "#size-cells", 0x0);
> @@ -321,25 +341,36 @@ static void fdt_add_v2m_gic_node(VirtBoardInfo *vbi)
> qemu_fdt_setprop_cell(vbi->fdt, "/intc/v2m", "phandle", vbi->v2m_phandle);
> }
>
> -static void fdt_add_gic_node(VirtBoardInfo *vbi)
> +static void fdt_add_gic_node(VirtBoardInfo *vbi, int type)
> {
> vbi->gic_phandle = qemu_fdt_alloc_phandle(vbi->fdt);
> qemu_fdt_setprop_cell(vbi->fdt, "/", "interrupt-parent", vbi->gic_phandle);
>
> qemu_fdt_add_subnode(vbi->fdt, "/intc");
> - /* 'cortex-a15-gic' means 'GIC v2' */
> - qemu_fdt_setprop_string(vbi->fdt, "/intc", "compatible",
> - "arm,cortex-a15-gic");
> qemu_fdt_setprop_cell(vbi->fdt, "/intc", "#interrupt-cells", 3);
> qemu_fdt_setprop(vbi->fdt, "/intc", "interrupt-controller", NULL, 0);
> - qemu_fdt_setprop_sized_cells(vbi->fdt, "/intc", "reg",
> - 2, vbi->memmap[VIRT_GIC_DIST].base,
> - 2, vbi->memmap[VIRT_GIC_DIST].size,
> - 2, vbi->memmap[VIRT_GIC_CPU].base,
> - 2, vbi->memmap[VIRT_GIC_CPU].size);
> qemu_fdt_setprop_cell(vbi->fdt, "/intc", "#address-cells", 0x2);
> qemu_fdt_setprop_cell(vbi->fdt, "/intc", "#size-cells", 0x2);
> qemu_fdt_setprop(vbi->fdt, "/intc", "ranges", NULL, 0);
> + if (type == 3) {
> + qemu_fdt_setprop_string(vbi->fdt, "/intc", "compatible",
> + "arm,gic-v3");
> + qemu_fdt_setprop_sized_cells(vbi->fdt, "/intc", "reg",
> + 2, vbi->memmap[VIRT_GIC_DIST].base,
> + 2, vbi->memmap[VIRT_GIC_DIST].size,
> + 2, vbi->memmap[VIRT_GIC_REDIST].base,
> + 2, vbi->memmap[VIRT_GIC_REDIST].size);
> + } else {
> + /* 'cortex-a15-gic' means 'GIC v2' */
> + qemu_fdt_setprop_string(vbi->fdt, "/intc", "compatible",
> + "arm,cortex-a15-gic");
> + qemu_fdt_setprop_sized_cells(vbi->fdt, "/intc", "reg",
> + 2, vbi->memmap[VIRT_GIC_DIST].base,
> + 2, vbi->memmap[VIRT_GIC_DIST].size,
> + 2, vbi->memmap[VIRT_GIC_CPU].base,
> + 2, vbi->memmap[VIRT_GIC_CPU].size);
> + }
> +
> qemu_fdt_setprop_cell(vbi->fdt, "/intc", "phandle", vbi->gic_phandle);
> }
>
> @@ -362,18 +393,18 @@ static void create_v2m(VirtBoardInfo *vbi, qemu_irq *pic)
> fdt_add_v2m_gic_node(vbi);
> }
>
> -static void create_gic(VirtBoardInfo *vbi, qemu_irq *pic)
> +static void create_gic(VirtBoardInfo *vbi, qemu_irq *pic, int type)
> {
> - /* We create a standalone GIC v2 */
> + /* We create a standalone GIC */
> DeviceState *gicdev;
> SysBusDevice *gicbusdev;
> const char *gictype;
> int i;
>
> - gictype = gic_class_name();
> + gictype = (type == 3) ? gicv3_class_name() : gic_class_name();
>
> gicdev = qdev_create(NULL, gictype);
> - qdev_prop_set_uint32(gicdev, "revision", 2);
> + qdev_prop_set_uint32(gicdev, "revision", type);
> qdev_prop_set_uint32(gicdev, "num-cpu", smp_cpus);
> /* Note that the num-irq property counts both internal and external
> * interrupts; there are always 32 of the former (mandated by GIC spec).
> @@ -382,7 +413,11 @@ static void create_gic(VirtBoardInfo *vbi, qemu_irq *pic)
> qdev_init_nofail(gicdev);
> gicbusdev = SYS_BUS_DEVICE(gicdev);
> sysbus_mmio_map(gicbusdev, 0, vbi->memmap[VIRT_GIC_DIST].base);
> - sysbus_mmio_map(gicbusdev, 1, vbi->memmap[VIRT_GIC_CPU].base);
> + if (type == 3) {
> + sysbus_mmio_map(gicbusdev, 1, vbi->memmap[VIRT_GIC_REDIST].base);
> + } else {
> + sysbus_mmio_map(gicbusdev, 1, vbi->memmap[VIRT_GIC_CPU].base);
> + }
>
> /* Wire the outputs from each CPU's generic timer to the
> * appropriate GIC PPI inputs, and the GIC's IRQ output to
> @@ -417,9 +452,11 @@ static void create_gic(VirtBoardInfo *vbi, qemu_irq *pic)
> pic[i] = qdev_get_gpio_in(gicdev, i);
> }
>
> - fdt_add_gic_node(vbi);
> + fdt_add_gic_node(vbi, type);
>
> - create_v2m(vbi, pic);
> + if (type == 2) {
> + create_v2m(vbi, pic);
> + }
> }
>
> static void create_uart(const VirtBoardInfo *vbi, qemu_irq *pic)
> @@ -723,7 +760,10 @@ static void create_pcie(const VirtBoardInfo *vbi, qemu_irq *pic)
> qemu_fdt_setprop_cells(vbi->fdt, nodename, "bus-range", 0,
> nr_pcie_buses - 1);
>
> - qemu_fdt_setprop_cells(vbi->fdt, nodename, "msi-parent", vbi->v2m_phandle);
> + if (vbi->v2m_phandle) {
> + qemu_fdt_setprop_cells(vbi->fdt, nodename, "msi-parent",
> + vbi->v2m_phandle);
> + }
>
> qemu_fdt_setprop_sized_cells(vbi->fdt, nodename, "reg",
> 2, base_ecam, 2, size_ecam);
> @@ -883,7 +923,7 @@ static void machvirt_init(MachineState *machine)
>
> create_flash(vbi);
>
> - create_gic(vbi, pic);
> + create_gic(vbi, pic, vms->gic_version);
>
> create_uart(vbi, pic);
>
> @@ -941,6 +981,26 @@ static void virt_set_secure(Object *obj, bool value, Error **errp)
> vms->secure = value;
> }
>
> +static void virt_get_gic_version(Object *obj, Visitor *v, void *opaque,
> + const char *name, Error **errp)
> +{
> + VirtMachineState *vms = VIRT_MACHINE(obj);
> +
> + visit_type_int32(v, &vms->gic_version, name, errp);
> +}
> +
> +static void virt_set_gic_version(Object *obj, Visitor *v, void *opaque,
> + const char *name, Error **errp)
> +{
> + VirtMachineState *vms = VIRT_MACHINE(obj);
> +
> + visit_type_int32(v, &vms->gic_version, name, errp);
> + if (vms->gic_version != 2 && vms->gic_version != 3) {
> + error_report ("Only GICv2 and GICv3 supported currently\n");
> + exit(1);
> + }
> +}
> +
> static void virt_instance_init(Object *obj)
> {
> VirtMachineState *vms = VIRT_MACHINE(obj);
> @@ -953,6 +1013,14 @@ static void virt_instance_init(Object *obj)
> "Set on/off to enable/disable the ARM "
> "Security Extensions (TrustZone)",
> NULL);
> +
> + /* Default GIC type is v2 */
> + vms->gic_version = 2;
In KVM case instead of assigning GICv2 as default, can we probe the KVM
for GICv3 presence using KVM_CREATE_DEVICE_TEST and give priority to
GICv3? Any suggestions?
Thanks,
Ashok
> + object_property_add(obj, "gic-version", "int", virt_get_gic_version,
> + virt_set_gic_version, NULL, NULL, NULL);
> + object_property_set_description(obj, "gic-version",
> + "Set GIC version. "
> + "Valid values are 2 and 3", NULL);
> }
>
> static void virt_class_init(ObjectClass *oc, void *data)
> @@ -962,7 +1030,10 @@ static void virt_class_init(ObjectClass *oc, void *data)
> mc->name = TYPE_VIRT_MACHINE;
> mc->desc = "ARM Virtual Machine",
> mc->init = machvirt_init;
> - mc->max_cpus = 8;
> + /* Our maximum number of CPUs depends on how many redistributors
> + * we can fit into memory map
> + */
> + mc->max_cpus = a15memmap[VIRT_GIC_REDIST].size / 0x20000;
> mc->has_dynamic_sysbus = true;
> mc->block_default_type = IF_VIRTIO;
> mc->no_cdrom = 1;
> diff --git a/include/hw/arm/fdt.h b/include/hw/arm/fdt.h
> index c3d5015..dd794dd 100644
> --- a/include/hw/arm/fdt.h
> +++ b/include/hw/arm/fdt.h
> @@ -29,6 +29,6 @@
> #define GIC_FDT_IRQ_FLAGS_LEVEL_LO 8
>
> #define GIC_FDT_IRQ_PPI_CPU_START 8
> -#define GIC_FDT_IRQ_PPI_CPU_WIDTH 8
> +#define GIC_FDT_IRQ_PPI_CPU_WIDTH 24
>
> #endif
> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> index d22fd8e..6c5a9c9 100644
> --- a/include/hw/arm/virt.h
> +++ b/include/hw/arm/virt.h
> @@ -46,6 +46,10 @@ enum {
> VIRT_CPUPERIPHS,
> VIRT_GIC_DIST,
> VIRT_GIC_CPU,
> + VIRT_GIC_V2M,
> + VIRT_ITS_CONTROL,
> + VIRT_ITS_TRANSLATION,
> + VIRT_GIC_REDIST,
> VIRT_UART,
> VIRT_MMIO,
> VIRT_RTC,
> @@ -54,7 +58,6 @@ enum {
> VIRT_PCIE_MMIO,
> VIRT_PCIE_PIO,
> VIRT_PCIE_ECAM,
> - VIRT_GIC_V2M,
> VIRT_PLATFORM_BUS,
> };
>
> --
> 1.9.5.msysgit.0
>
>
^ permalink raw reply [flat|nested] 9+ messages in thread[parent not found: <"20150825134053.GB27329@ashoks"@broadcom.com>]
* Re: [Qemu-devel] [PATCH v11 5/5] hw/arm/virt: Add gic-version option to virt machine
[not found] ` <"20150825134053.GB27329@ashoks"@broadcom.com>
@ 2015-08-25 13:53 ` Pavel Fedin
0 siblings, 0 replies; 9+ messages in thread
From: Pavel Fedin @ 2015-08-25 13:53 UTC (permalink / raw)
To: 'Ashok Kumar'
Cc: 'Peter Maydell', 'Eric Auger',
'Shlomo Pongratz', 'Shlomo Pongratz', qemu-devel,
'Christoffer Dall'
Hello!
> In KVM case instead of assigning GICv2 as default, can we probe the KVM
> for GICv3 presence using KVM_CREATE_DEVICE_TEST and give priority to
> GICv3?
We could, but i think this would hurt usability. I suggest that when the user chooses a
configuration, he/she expects to get something particular. And IMHO it's much better to default to
GICv2 (to be backwards-compatible), and just report error in case if this is not supported by KVM,
than to default to something, which is different on different machines and different kernels.
Libvirt guys already blame "virt" machine for being too flexible...
Kind regards,
Pavel Fedin
Expert Engineer
Samsung Electronics Research center Russia
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] [PATCH v11 0/5] vGICv3 support
2015-08-19 7:23 [Qemu-devel] [PATCH v11 0/5] vGICv3 support Pavel Fedin
` (4 preceding siblings ...)
2015-08-19 7:23 ` [Qemu-devel] [PATCH v11 5/5] hw/arm/virt: Add gic-version option to virt machine Pavel Fedin
@ 2015-08-25 13:31 ` Ashok Kumar
5 siblings, 0 replies; 9+ messages in thread
From: Ashok Kumar @ 2015-08-25 13:31 UTC (permalink / raw)
To: Pavel Fedin
Cc: Peter Maydell, Eric Auger, Shlomo Pongratz, Shlomo Pongratz,
qemu-devel, Christoffer Dall
On Wed, Aug 19, 2015 at 10:23:21AM +0300, Pavel Fedin wrote:
> This series introduces support for GICv3 by KVM. Software emulation is
> currently not supported.
>
> v11 => v10
> - Fixed minor issues with checkpatch and comments, reported by Eric Auger
> - Make reusable kvm_gic_supports_attr(), moved to kvm-all.c and renamed
> as kvm_device_check_attr(). Useful for future live migration.
>
> v9 => v10
> - Renamed "gicversion" option to "gic-version" (was forgotten in v9)
> - Data pointer in kvm_gic_access() is now void * because in case of
> vGICv3 this function is expected to operate on 64-bit registers too
> (GICD_IROUTER for instance)
>
> v8 => v9
> - Removed all limitations on CPU and IRQ number from the base class
> - Added back missing properties, interface is now the same as in GICv2
> - Refactored reusable parts of vGICv2 code, decreased number of changes
> - Removed GIC type check from kvm_arch_irqchip_create(), no more need to
> specify GIC type early
> - Fixed up all commit messages / logs
> - Removed 'nvic' field assignment in virt machine (was forgotten in v8)
> - CPU number limitation for 'virt' machine now comes from memory map
> (how many redistributors can be placed). With current layout it appears
> to be 126.
>
> v7 => v8
> - Removed all unused SW emulation code
> - Removed unnecessary attributes from common class
> - Set "unmigratable" flag for GICv3 device
> - Removed unnecessary conditions from kvm_arm_gicv3_realize()
> - Fixed GIC type setting in vexpress model, was done in wrong place
> - Fixed condition style in hw/intc/Makefile.objs
> - Cleaned up virt machine memory map
>
> v6 => v7
> - Wrap own GIC type definitions on top of KVM ones. Fixed build on
> non-ARM-Linux hosts
>
> v5 => v6
> - Fixed various checkpatch.pl style warnings
> - Removed TODO in gicv3_init_irqs_and_mmio(), relevant memory API patch
> included
> - gicv3_init_irqs_and_mmio() now takes 3 arguments instead of 4. It is more
> convenient to pass MMIO descriptors as array
>
> v4 => v5
> - Do not reintroduce several constants shared with GICv2, reuse them instead.
> - Added gicv3_init_irqs_and_mmio() in base class, to be used by both software
> emulation and KVM code. Avoids code duplication.
> - Do not add NULL msi-parent phandle to PCI device in the FDT
> - Removed a couple of stale things from virt.c
>
> v3 => v4
> - Fixed stupid build breakage in patch 0002
> - Rebased on top of current master, patch 0003 adjusted according to
> kvm_irqchip_create() changes
> - Added assertion against uninitialized kernel_irqchip_type
> - Removed kernel_irqchip_type initialization from models which do not
> use KVM vGIC
>
> v2 => v3
> - Removed some unrelated and unnecessary changes from virt machine,
> occasionally slipped in; some of them caused qemu to crash on ARM32.
> - Fixed build for ARM32; vGICv3 code requires definitions which are
> present only in ARM64 kernel
>
> v1 => v2
> - Base class included, taken from the series by Shlomo Pongratz:
> http://lists.nongnu.org/archive/html/qemu-devel/2015-06/msg01512.html
> The code is refactored as little as possible in order to simplify
> further addition of software emulation:
> - Minor fixes in code style and comments, according to old reviews
> - Removed REV_V3 definition because it's currently not used, and it does
> not add any meaning to number 3.
> - Removed reserved regions for MBI and ITS (except for 'virt' machine
> memory map). These should go to separate classes when implemented.
> - Improved commit messages
> - vGIC patches restructured
> - Use 'gicversion' option instead of virt-v3 machine
>
> Pavel Fedin (4):
> intc/gic: Extract some reusable vGIC code
> arm_kvm: Do not assume particular GIC type in
> kvm_arch_irqchip_create()
> hw/intc: Initial implementation of vGICv3
> hw/arm/virt: Add gic-version option to virt machine
>
> Shlomo Pongratz (1):
> hw/intc: Implement GIC-500 base class
>
> hw/arm/virt.c | 111 ++++++++++++++++++++++-----
> hw/intc/Makefile.objs | 2 +
> hw/intc/arm_gic_kvm.c | 46 +++++-------
> hw/intc/arm_gicv3_common.c | 140 ++++++++++++++++++++++++++++++++++
> hw/intc/arm_gicv3_kvm.c | 149 +++++++++++++++++++++++++++++++++++++
> hw/intc/vgic_common.h | 55 ++++++++++++++
> include/hw/arm/fdt.h | 2 +-
> include/hw/arm/virt.h | 5 +-
> include/hw/intc/arm_gicv3_common.h | 68 +++++++++++++++++
> include/sysemu/kvm.h | 12 +++
> kvm-all.c | 11 +++
> target-arm/kvm.c | 10 +--
> target-arm/kvm_arm.h | 10 +++
> target-arm/machine.c | 18 +++++
> 14 files changed, 582 insertions(+), 57 deletions(-)
> create mode 100644 hw/intc/arm_gicv3_common.c
> create mode 100644 hw/intc/arm_gicv3_kvm.c
> create mode 100644 hw/intc/vgic_common.h
> create mode 100644 include/hw/intc/arm_gicv3_common.h
>
> --
> 1.9.5.msysgit.0
>
>
Tested on Broadcom ARM64 processor hardware emulation platform and
ARM Fast model.
Tested-by: Ashok kumar <ashoks@broadcom.com>
Thanks,
Ashok
^ permalink raw reply [flat|nested] 9+ messages in thread