From: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
To: Stefan Weil <sw@weilnetz.de>
Cc: QEMU Trivial <qemu-trivial@nongnu.org>,
QEMU Developer <qemu-devel@nongnu.org>
Subject: Re: [Qemu-devel] [PATCH] disas/microblaze: Remove unused code
Date: Sun, 30 Aug 2015 12:36:53 -0700 [thread overview]
Message-ID: <20150830193653.GA5289@toto> (raw)
In-Reply-To: <1440834273-6023-1-git-send-email-sw@weilnetz.de>
On Sat, Aug 29, 2015 at 09:44:33AM +0200, Stefan Weil wrote:
> Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
> ---
> disas/microblaze.c | 150 -----------------------------------------------------
> 1 file changed, 150 deletions(-)
>
> diff --git a/disas/microblaze.c b/disas/microblaze.c
> index c14ab89..3588235 100644
> --- a/disas/microblaze.c
> +++ b/disas/microblaze.c
> @@ -604,25 +604,6 @@ char * get_field_special (long instr, struct op_code_struct * op);
> unsigned long read_insn_microblaze (bfd_vma memaddr,
> struct disassemble_info *info,
> struct op_code_struct **opr);
> -enum microblaze_instr get_insn_microblaze (long inst,
> - bfd_boolean *isunsignedimm,
> - enum microblaze_instr_type *insn_type,
> - short *delay_slots);
> -short get_delay_slots_microblaze (long inst);
> -enum microblaze_instr microblaze_decode_insn (long insn,
> - int *rd,
> - int *ra,
> - int *rb,
> - int *imm);
> -unsigned long
> -microblaze_get_target_address (long inst,
> - bfd_boolean immfound,
> - int immval,
> - long pcval,
> - long r1val,
> - long r2val,
> - bfd_boolean *targetvalid,
> - bfd_boolean *unconditionalbranch);
>
> static char *
> get_field (long instr, long mask, unsigned short low)
> @@ -968,134 +949,3 @@ print_insn_microblaze (bfd_vma memaddr, struct disassemble_info * info)
> /* Say how many bytes we consumed? */
> return 4;
> }
> -
> -enum microblaze_instr
> -get_insn_microblaze (long inst,
> - bfd_boolean *isunsignedimm,
> - enum microblaze_instr_type *insn_type,
> - short *delay_slots)
> -{
> - struct op_code_struct * op;
> - *isunsignedimm = FALSE;
> -
> - /* Just a linear search of the table. */
> - for (op = opcodes; op->name != 0; op ++)
> - if (op->bit_sequence == (inst & op->opcode_mask))
> - break;
> -
> - if (op->name == 0)
> - return invalid_inst;
> - else {
> - *isunsignedimm = (op->inst_type == INST_TYPE_RD_R1_UNSIGNED_IMM);
> - *insn_type = op->instr_type;
> - *delay_slots = op->delay_slots;
> - return op->instr;
> - }
> -}
> -
> -short
> -get_delay_slots_microblaze (long inst)
> -{
> - bfd_boolean isunsignedimm;
> - enum microblaze_instr_type insn_type;
> - enum microblaze_instr op;
> - short delay_slots;
> -
> - op = get_insn_microblaze( inst, &isunsignedimm, &insn_type, &delay_slots);
> - if (op == invalid_inst)
> - return 0;
> - else
> - return delay_slots;
> -}
> -
> -enum microblaze_instr
> -microblaze_decode_insn (long insn,
> - int *rd,
> - int *ra,
> - int *rb,
> - int *imm)
> -{
> - enum microblaze_instr op;
> - bfd_boolean t1;
> - enum microblaze_instr_type t2;
> - short t3;
> -
> - op = get_insn_microblaze(insn, &t1, &t2, &t3);
> - *rd = (insn & RD_MASK) >> RD_LOW;
> - *ra = (insn & RA_MASK) >> RA_LOW;
> - *rb = (insn & RB_MASK) >> RB_LOW;
> - t3 = (insn & IMM_MASK) >> IMM_LOW;
> - *imm = (int) t3;
> - return (op);
> -}
> -
> -unsigned long
> -microblaze_get_target_address (long inst,
> - bfd_boolean immfound,
> - int immval,
> - long pcval,
> - long r1val,
> - long r2val,
> - bfd_boolean *targetvalid,
> - bfd_boolean *unconditionalbranch)
> -{
> - struct op_code_struct * op;
> - long targetaddr = 0;
> -
> - *unconditionalbranch = FALSE;
> - /* Just a linear search of the table. */
> - for (op = opcodes; op->name != 0; op ++)
> - if (op->bit_sequence == (inst & op->opcode_mask))
> - break;
> -
> - if (op->name == 0) {
> - *targetvalid = FALSE;
> - } else if (op->instr_type == branch_inst) {
> - switch (op->inst_type) {
> - case INST_TYPE_R2:
> - *unconditionalbranch = TRUE;
> - /* fallthru */
> - case INST_TYPE_RD_R2:
> - case INST_TYPE_R1_R2:
> - targetaddr = r2val;
> - *targetvalid = TRUE;
> - if (op->inst_offset_type == INST_PC_OFFSET)
> - targetaddr += pcval;
> - break;
> - case INST_TYPE_IMM:
> - *unconditionalbranch = TRUE;
> - /* fallthru */
> - case INST_TYPE_RD_IMM:
> - case INST_TYPE_R1_IMM:
> - if (immfound) {
> - targetaddr = (immval << 16) & 0xffff0000;
> - targetaddr |= (get_int_field_imm(inst) & 0x0000ffff);
> - } else {
> - targetaddr = get_int_field_imm(inst);
> - if (targetaddr & 0x8000)
> - targetaddr |= 0xFFFF0000;
> - }
> - if (op->inst_offset_type == INST_PC_OFFSET)
> - targetaddr += pcval;
> - *targetvalid = TRUE;
> - break;
> - default:
> - *targetvalid = FALSE;
> - break;
> - }
> - } else if (op->instr_type == return_inst) {
> - if (immfound) {
> - targetaddr = (immval << 16) & 0xffff0000;
> - targetaddr |= (get_int_field_imm(inst) & 0x0000ffff);
> - } else {
> - targetaddr = get_int_field_imm(inst);
> - if (targetaddr & 0x8000)
> - targetaddr |= 0xFFFF0000;
> - }
> - targetaddr += r1val;
> - *targetvalid = TRUE;
> - } else {
> - *targetvalid = FALSE;
> - }
> - return targetaddr;
> -}
> --
> 2.1.4
>
next prev parent reply other threads:[~2015-08-30 19:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-29 7:44 [Qemu-devel] [PATCH] disas/microblaze: Remove unused code Stefan Weil
2015-08-30 19:36 ` Edgar E. Iglesias [this message]
2015-09-06 11:08 ` Michael Tokarev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150830193653.GA5289@toto \
--to=edgar.iglesias@gmail.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-trivial@nongnu.org \
--cc=sw@weilnetz.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).