From: "Michael S. Tsirkin" <mst@redhat.com>
To: Marcel Apfelbaum <marcel@redhat.com>
Cc: jasowang@redhat.com, Yuanhan Liu <yuanhan.liu@linux.intel.com>,
qemu-devel@nongnu.org, Changchun.ouyang@hotmail.com
Subject: Re: [Qemu-devel] [PATCH v11 1/7] vhost-user: use VHOST_USER_XXX macro for switch statement
Date: Thu, 24 Sep 2015 13:18:11 +0300 [thread overview]
Message-ID: <20150924131742-mutt-send-email-mst@redhat.com> (raw)
In-Reply-To: <5603CAD7.2000801@redhat.com>
On Thu, Sep 24, 2015 at 01:05:11PM +0300, Marcel Apfelbaum wrote:
> On 09/23/2015 07:19 AM, Yuanhan Liu wrote:
> >So that we could let vhost_user_call to handle extented requests,
> >such as VHOST_USER_GET/SET_PROTOCOL_FEATURES, instead of invoking
> >vhost_user_read/write and constructing the msg again by ourself.
> >
> >Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
> >---
> > hw/virtio/vhost-user.c | 38 ++++++++++++++++++++++----------------
> > 1 file changed, 22 insertions(+), 16 deletions(-)
> >
> >diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c
> >index e7ab829..13677ac 100644
> >--- a/hw/virtio/vhost-user.c
> >+++ b/hw/virtio/vhost-user.c
> >@@ -193,27 +193,33 @@ static int vhost_user_call(struct vhost_dev *dev, unsigned long int request,
> >
> > assert(dev->vhost_ops->backend_type == VHOST_BACKEND_TYPE_USER);
> >
> >- msg_request = vhost_user_request_translate(request);
> >+ /* only translate vhost ioctl requests */
> >+ if (request > VHOST_USER_MAX) {
> >+ msg_request = vhost_user_request_translate(request);
> >+ } else {
> >+ msg_request = request;
> >+ }
> >+
> > msg.request = msg_request;
> > msg.flags = VHOST_USER_VERSION;
> > msg.size = 0;
> >
> >- switch (request) {
> >- case VHOST_GET_FEATURES:
> >+ switch (msg_request) {
> >+ case VHOST_USER_GET_FEATURES:
> > need_reply = 1;
> > break;
> >
> >- case VHOST_SET_FEATURES:
> >- case VHOST_SET_LOG_BASE:
> >+ case VHOST_USER_SET_FEATURES:
> >+ case VHOST_USER_SET_LOG_BASE:
> > msg.u64 = *((__u64 *) arg);
> > msg.size = sizeof(m.u64);
> > break;
> >
> >- case VHOST_SET_OWNER:
> >- case VHOST_RESET_OWNER:
> >+ case VHOST_USER_SET_OWNER:
> >+ case VHOST_USER_RESET_OWNER:
> > break;
> >
> >- case VHOST_SET_MEM_TABLE:
> >+ case VHOST_USER_SET_MEM_TABLE:
> > for (i = 0; i < dev->mem->nregions; ++i) {
> > struct vhost_memory_region *reg = dev->mem->regions + i;
> > ram_addr_t ram_addr;
> >@@ -246,30 +252,30 @@ static int vhost_user_call(struct vhost_dev *dev, unsigned long int request,
> >
> > break;
> >
> >- case VHOST_SET_LOG_FD:
> >+ case VHOST_USER_SET_LOG_FD:
> > fds[fd_num++] = *((int *) arg);
> > break;
> >
> >- case VHOST_SET_VRING_NUM:
> >- case VHOST_SET_VRING_BASE:
> >+ case VHOST_USER_SET_VRING_NUM:
> >+ case VHOST_USER_SET_VRING_BASE:
> > memcpy(&msg.state, arg, sizeof(struct vhost_vring_state));
> > msg.size = sizeof(m.state);
> > break;
> >
> >- case VHOST_GET_VRING_BASE:
> >+ case VHOST_USER_GET_VRING_BASE:
> > memcpy(&msg.state, arg, sizeof(struct vhost_vring_state));
> > msg.size = sizeof(m.state);
> > need_reply = 1;
> > break;
> >
> >- case VHOST_SET_VRING_ADDR:
> >+ case VHOST_USER_SET_VRING_ADDR:
> > memcpy(&msg.addr, arg, sizeof(struct vhost_vring_addr));
> > msg.size = sizeof(m.addr);
> > break;
> >
> >- case VHOST_SET_VRING_KICK:
> >- case VHOST_SET_VRING_CALL:
> >- case VHOST_SET_VRING_ERR:
> >+ case VHOST_USER_SET_VRING_KICK:
> >+ case VHOST_USER_SET_VRING_CALL:
> >+ case VHOST_USER_SET_VRING_ERR:
> > file = arg;
> > msg.u64 = file->index & VHOST_USER_VRING_IDX_MASK;
> > msg.size = sizeof(m.u64);
> >
>
>
> --
> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
The -- is the signature separator.
Please don't put text after that - I almost missed it.
next prev parent reply other threads:[~2015-09-24 10:18 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-23 4:19 [Qemu-devel] [PATCH v11 0/7] vhost-user multiple queue support Yuanhan Liu
2015-09-23 4:19 ` [Qemu-devel] [PATCH v11 1/7] vhost-user: use VHOST_USER_XXX macro for switch statement Yuanhan Liu
2015-09-24 10:05 ` Marcel Apfelbaum
2015-09-24 10:18 ` Michael S. Tsirkin [this message]
2015-09-24 10:27 ` Marcel Apfelbaum
2015-09-23 4:19 ` [Qemu-devel] [PATCH v11 2/7] vhost-user: add protocol feature negotiation Yuanhan Liu
2015-09-24 10:13 ` Marcel Apfelbaum
2015-09-24 11:25 ` Yuanhan Liu
2015-09-24 11:29 ` Yuanhan Liu
2015-09-23 4:19 ` [Qemu-devel] [PATCH v11 3/7] vhost: rename VHOST_RESET_OWNER to VHOST_RESET_DEVICE Yuanhan Liu
2015-09-24 10:18 ` Marcel Apfelbaum
2015-09-23 4:19 ` [Qemu-devel] [PATCH v11 4/7] vhost-user: add VHOST_USER_GET_QUEUE_NUM message Yuanhan Liu
2015-09-24 10:25 ` Marcel Apfelbaum
2015-09-23 4:19 ` [Qemu-devel] [PATCH v11 5/7] vhost: introduce vhost_backend_get_vq_index method Yuanhan Liu
2015-09-23 4:20 ` [Qemu-devel] [PATCH v11 6/7] vhost-user: add multiple queue support Yuanhan Liu
2015-09-23 6:56 ` Yuanhan Liu
2015-09-24 5:34 ` Jason Wang
2015-09-24 5:57 ` Yuanhan Liu
2015-09-24 6:15 ` Jason Wang
2015-09-23 4:20 ` [Qemu-devel] [PATCH v11 7/7] vhost-user: add a new message to disable/enable a specific virt queue Yuanhan Liu
2015-09-24 5:43 ` Jason Wang
2015-09-24 10:03 ` [Qemu-devel] [PATCH v11 0/7] vhost-user multiple queue support Marcel Apfelbaum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150924131742-mutt-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=Changchun.ouyang@hotmail.com \
--cc=jasowang@redhat.com \
--cc=marcel@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=yuanhan.liu@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).