From: "Michael S. Tsirkin" <mst@redhat.com>
To: marcandre.lureau@redhat.com
Cc: haifeng.lin@huawei.com, thibaut.collet@6wind.com,
jasowang@redhat.com, qemu-devel@nongnu.org, pbonzini@redhat.com
Subject: Re: [Qemu-devel] [PATCH v5 11/21] vhost: only use shared log if in use by backend
Date: Tue, 29 Sep 2015 17:59:24 +0300 [thread overview]
Message-ID: <20150929175849-mutt-send-email-mst@redhat.com> (raw)
In-Reply-To: <1443111741-4736-12-git-send-email-marcandre.lureau@redhat.com>
On Thu, Sep 24, 2015 at 06:22:11PM +0200, marcandre.lureau@redhat.com wrote:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> Do not allocate a shared log if the backend doesn't support it.
>
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
So squash this in the previous patch introducing the shared log?
This split makes review harder, not easier.
> ---
> hw/virtio/vhost-user.c | 9 +++++++++
> hw/virtio/vhost.c | 15 ++++++++++-----
> include/hw/virtio/vhost-backend.h | 4 ++++
> 3 files changed, 23 insertions(+), 5 deletions(-)
>
> diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c
> index 41e0364..455caba 100644
> --- a/hw/virtio/vhost-user.c
> +++ b/hw/virtio/vhost-user.c
> @@ -553,6 +553,14 @@ static int vhost_user_get_vq_index(struct vhost_dev *dev, int idx)
> return idx;
> }
>
> +static bool vhost_user_requires_shm_log(struct vhost_dev *dev)
> +{
> + assert(dev->vhost_ops->backend_type == VHOST_BACKEND_TYPE_USER);
> +
> + return virtio_has_feature(dev->protocol_features,
> + VHOST_USER_PROTOCOL_F_LOG_SHMFD);
> +}
> +
> const VhostOps user_ops = {
> .backend_type = VHOST_BACKEND_TYPE_USER,
> .vhost_backend_init = vhost_user_init,
> @@ -573,4 +581,5 @@ const VhostOps user_ops = {
> .vhost_reset_device = vhost_user_reset_device,
> .vhost_get_vq_index = vhost_user_get_vq_index,
> .vhost_set_vring_enable = vhost_user_set_vring_enable,
> + .vhost_requires_shm_log = vhost_user_requires_shm_log,
> };
> diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
> index d9f2131..ec27c7b 100644
> --- a/hw/virtio/vhost.c
> +++ b/hw/virtio/vhost.c
> @@ -357,10 +357,15 @@ static void vhost_log_put(struct vhost_dev *dev, bool sync)
> }
> }
>
> -static inline void vhost_dev_log_resize(struct vhost_dev* dev, uint64_t size)
> +static bool vhost_dev_log_is_shared(struct vhost_dev *dev)
> {
> - bool share = dev->vhost_ops->backend_type == VHOST_BACKEND_TYPE_USER;
> - struct vhost_log *log = vhost_log_get(size, share);
> + return dev->vhost_ops->vhost_requires_shm_log &&
> + dev->vhost_ops->vhost_requires_shm_log(dev);
> +}
> +
> +static inline void vhost_dev_log_resize(struct vhost_dev *dev, uint64_t size)
> +{
> + struct vhost_log *log = vhost_log_get(size, vhost_dev_log_is_shared(dev));
> uint64_t log_base = (uintptr_t)log->log;
> int r;
>
> @@ -1166,10 +1171,10 @@ int vhost_dev_start(struct vhost_dev *hdev, VirtIODevice *vdev)
>
> if (hdev->log_enabled) {
> uint64_t log_base;
> - bool share = hdev->vhost_ops->backend_type == VHOST_BACKEND_TYPE_USER;
>
> hdev->log_size = vhost_get_log_size(hdev);
> - hdev->log = vhost_log_get(hdev->log_size, share);
> + hdev->log = vhost_log_get(hdev->log_size,
> + vhost_dev_log_is_shared(hdev));
> log_base = (uintptr_t)hdev->log->log;
> r = hdev->vhost_ops->vhost_set_log_base(hdev,
> hdev->log_size ? log_base : 0,
> diff --git a/include/hw/virtio/vhost-backend.h b/include/hw/virtio/vhost-backend.h
> index 868a78a..e07118c 100644
> --- a/include/hw/virtio/vhost-backend.h
> +++ b/include/hw/virtio/vhost-backend.h
> @@ -11,6 +11,8 @@
> #ifndef VHOST_BACKEND_H_
> #define VHOST_BACKEND_H_
>
> +#include <stdbool.h>
> +
> typedef enum VhostBackendType {
> VHOST_BACKEND_TYPE_NONE = 0,
> VHOST_BACKEND_TYPE_KERNEL = 1,
> @@ -64,6 +66,7 @@ typedef int (*vhost_reset_device_op)(struct vhost_dev *dev);
> typedef int (*vhost_get_vq_index_op)(struct vhost_dev *dev, int idx);
> typedef int (*vhost_set_vring_enable_op)(struct vhost_dev *dev,
> int enable);
> +typedef bool (*vhost_requires_shm_log_op)(struct vhost_dev *dev);
>
> typedef struct VhostOps {
> VhostBackendType backend_type;
> @@ -90,6 +93,7 @@ typedef struct VhostOps {
> vhost_reset_device_op vhost_reset_device;
> vhost_get_vq_index_op vhost_get_vq_index;
> vhost_set_vring_enable_op vhost_set_vring_enable;
> + vhost_requires_shm_log_op vhost_requires_shm_log;
> } VhostOps;
>
> extern const VhostOps user_ops;
> --
> 2.4.3
next prev parent reply other threads:[~2015-09-29 14:59 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-24 16:22 [Qemu-devel] [PATCH v5 00/21] vhost-user: add migration support marcandre.lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 01/21] vhost-user: unit test for new messages marcandre.lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 02/21] configure: probe for memfd marcandre.lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 03/21] util: add linux-only memfd fallback marcandre.lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 04/21] util: add memfd helpers marcandre.lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 05/21] vhost: alloc shareable log marcandre.lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 06/21] vhost: document log resizing marcandre.lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 07/21] vhost: add vhost_set_log_base op marcandre.lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 08/21] vhost-user: send log shm fd along with log_base marcandre.lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 09/21] vhost-user: add a migration blocker marcandre.lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 10/21] vhost: use a function for each call marcandre.lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 11/21] vhost: only use shared log if in use by backend marcandre.lureau
2015-09-29 14:59 ` Michael S. Tsirkin [this message]
2015-09-29 15:26 ` Marc-André Lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 12/21] vhost-user: document migration log marcandre.lureau
2015-09-24 16:38 ` Eric Blake
2015-09-24 16:41 ` Marc-André Lureau
2015-09-24 16:47 ` Eric Blake
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 13/21] net: add trace_vhost_user_event marcandre.lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 14/21] vhost user: add support of live migration marcandre.lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 15/21] vhost user: add rarp sending after live migration for legacy guest marcandre.lureau
2015-09-24 17:24 ` Thibaut Collet
2015-09-24 21:53 ` Marc-André Lureau
2015-09-27 13:12 ` Michael S. Tsirkin
2015-09-27 15:13 ` Marc-André Lureau
2015-09-27 15:49 ` Thibaut Collet
2015-09-27 18:04 ` Marc-André Lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 16/21] vhost-user-test: move wait_for_fds() out marcandre.lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 17/21] vhost-user-test: remove useless static check marcandre.lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 18/21] vhost-user-test: wrap server in TestServer struct marcandre.lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 19/21] vhost-user-test: learn to tweak various qemu arguments marcandre.lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 20/21] vhost-user-test: add live-migration test marcandre.lureau
2015-09-24 16:22 ` [Qemu-devel] [PATCH v5 21/21] vhost-user-test: check ownership during migration marcandre.lureau
2015-09-27 13:19 ` [Qemu-devel] [PATCH v5 00/21] vhost-user: add migration support Michael S. Tsirkin
2015-09-29 15:07 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150929175849-mutt-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=haifeng.lin@huawei.com \
--cc=jasowang@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=thibaut.collet@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).