From: "Michael S. Tsirkin" <mst@redhat.com>
To: Cao jin <caoj.fnst@cn.fujitsu.com>
Cc: Chen Fan <chen.fan.fnst@cn.fujitsu.com>,
alex.williamson@redhat.com, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v13 06/13] aer: impove pcie_aer_init to support vfio device
Date: Wed, 11 Nov 2015 18:55:52 +0200 [thread overview]
Message-ID: <20151111185547-mutt-send-email-mst@redhat.com> (raw)
In-Reply-To: <70e2840f31bce7610a2b04a3390589b3085035b3.1447231392.git.chen.fan.fnst@cn.fujitsu.com>
On Wed, Nov 11, 2015 at 06:34:24PM +0800, Cao jin wrote:
> From: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
>
> pcie_aer_init was used to emulate an aer capability for pcie device,
> but for vfio device, the aer config space size is mutable and is not
> always equal to PCI_ERR_SIZEOF(0x48). it depends on where the TLP Prefix
> register required, so here we add a size argument.
>
> Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
> ---
> hw/pci-bridge/ioh3420.c | 2 +-
> hw/pci-bridge/xio3130_downstream.c | 2 +-
> hw/pci-bridge/xio3130_upstream.c | 2 +-
> hw/pci/pcie_aer.c | 4 ++--
> include/hw/pci/pcie_aer.h | 2 +-
> 5 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/hw/pci-bridge/ioh3420.c b/hw/pci-bridge/ioh3420.c
> index cce2fdd..4d9cd3f 100644
> --- a/hw/pci-bridge/ioh3420.c
> +++ b/hw/pci-bridge/ioh3420.c
> @@ -129,7 +129,7 @@ static int ioh3420_initfn(PCIDevice *d)
> goto err_pcie_cap;
> }
> pcie_cap_root_init(d);
> - rc = pcie_aer_init(d, IOH_EP_AER_OFFSET);
> + rc = pcie_aer_init(d, IOH_EP_AER_OFFSET, PCI_ERR_SIZEOF);
> if (rc < 0) {
> goto err;
> }
> diff --git a/hw/pci-bridge/xio3130_downstream.c b/hw/pci-bridge/xio3130_downstream.c
> index b3a6479..9737041 100644
> --- a/hw/pci-bridge/xio3130_downstream.c
> +++ b/hw/pci-bridge/xio3130_downstream.c
> @@ -92,7 +92,7 @@ static int xio3130_downstream_initfn(PCIDevice *d)
> goto err_pcie_cap;
> }
> pcie_cap_arifwd_init(d);
> - rc = pcie_aer_init(d, XIO3130_AER_OFFSET);
> + rc = pcie_aer_init(d, XIO3130_AER_OFFSET, PCI_ERR_SIZEOF);
> if (rc < 0) {
> goto err;
> }
> diff --git a/hw/pci-bridge/xio3130_upstream.c b/hw/pci-bridge/xio3130_upstream.c
> index eada582..4d7f894 100644
> --- a/hw/pci-bridge/xio3130_upstream.c
> +++ b/hw/pci-bridge/xio3130_upstream.c
> @@ -81,7 +81,7 @@ static int xio3130_upstream_initfn(PCIDevice *d)
> }
> pcie_cap_flr_init(d);
> pcie_cap_deverr_init(d);
> - rc = pcie_aer_init(d, XIO3130_AER_OFFSET);
> + rc = pcie_aer_init(d, XIO3130_AER_OFFSET, PCI_ERR_SIZEOF);
> if (rc < 0) {
> goto err;
> }
> diff --git a/hw/pci/pcie_aer.c b/hw/pci/pcie_aer.c
> index 98d2c18..45f351b 100644
> --- a/hw/pci/pcie_aer.c
> +++ b/hw/pci/pcie_aer.c
> @@ -94,12 +94,12 @@ static void aer_log_clear_all_err(PCIEAERLog *aer_log)
> aer_log->log_num = 0;
> }
>
> -int pcie_aer_init(PCIDevice *dev, uint16_t offset)
> +int pcie_aer_init(PCIDevice *dev, uint16_t offset, uint16_t size)
> {
> PCIExpressDevice *exp;
>
> pcie_add_capability(dev, PCI_EXT_CAP_ID_ERR, PCI_ERR_VER,
> - offset, PCI_ERR_SIZEOF);
> + offset, size);
> exp = &dev->exp;
> exp->aer_cap = offset;
>
> diff --git a/include/hw/pci/pcie_aer.h b/include/hw/pci/pcie_aer.h
> index 2fb8388..156acb0 100644
> --- a/include/hw/pci/pcie_aer.h
> +++ b/include/hw/pci/pcie_aer.h
> @@ -87,7 +87,7 @@ struct PCIEAERErr {
>
> extern const VMStateDescription vmstate_pcie_aer_log;
>
> -int pcie_aer_init(PCIDevice *dev, uint16_t offset);
> +int pcie_aer_init(PCIDevice *dev, uint16_t offset, uint16_t size);
> void pcie_aer_exit(PCIDevice *dev);
> void pcie_aer_write_config(PCIDevice *dev,
> uint32_t addr, uint32_t val, int len);
> --
> 1.9.3
next prev parent reply other threads:[~2015-11-11 16:59 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-11 10:34 [Qemu-devel] [PATCH v13 00/13] vfio-pci: pass the aer error to guest Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 01/13] vfio: extract vfio_get_hot_reset_info as a single function Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 02/13] vfio: squeeze out vfio_pci_do_hot_reset for support bus reset Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 03/13] pcie: modify the capability size assert Cao jin
2015-11-11 16:55 ` Michael S. Tsirkin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 04/13] vfio: make the 4 bytes aligned for capability size Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 05/13] vfio: add pcie extanded capability support Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 06/13] aer: impove pcie_aer_init to support vfio device Cao jin
2015-11-11 16:55 ` Michael S. Tsirkin [this message]
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 07/13] vfio: add aer support for " Cao jin
2015-11-11 20:49 ` Alex Williamson
2015-11-12 11:54 ` Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 08/13] vfio: add check host bus reset is support or not Cao jin
2015-11-11 20:53 ` Alex Williamson
2015-11-12 11:56 ` Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 09/13] add check reset mechanism when hotplug vfio device Cao jin
2015-11-12 11:51 ` Michael S. Tsirkin
2015-11-13 3:28 ` Cao jin
2015-11-13 21:04 ` Alex Williamson
2015-11-16 10:18 ` Chen Fan
2015-11-16 16:05 ` Alex Williamson
2015-11-17 2:48 ` Chen Fan
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 10/13] pci: add pci device pre-post reset callbacks for host bus reset Cao jin
2015-11-11 16:56 ` Michael S. Tsirkin
2015-11-11 20:58 ` Alex Williamson
2015-11-12 11:58 ` Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 11/13] pcie_aer: expose pcie_aer_msg() interface Cao jin
2015-11-11 16:56 ` Michael S. Tsirkin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 12/13] vfio-pci: pass the aer error to guest Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 13/13] vfio: add 'aer' property to expose aercap Cao jin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151111185547-mutt-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=alex.williamson@redhat.com \
--cc=caoj.fnst@cn.fujitsu.com \
--cc=chen.fan.fnst@cn.fujitsu.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).