qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Cao jin <caoj.fnst@cn.fujitsu.com>
Cc: Chen Fan <chen.fan.fnst@cn.fujitsu.com>,
	alex.williamson@redhat.com, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v13 10/13] pci: add pci device pre-post reset callbacks for host bus reset
Date: Wed, 11 Nov 2015 18:56:05 +0200	[thread overview]
Message-ID: <20151111185559-mutt-send-email-mst@redhat.com> (raw)
In-Reply-To: <4c3082e57fbcc6c2a0ebf032f7eabea273d7e935.1447231392.git.chen.fan.fnst@cn.fujitsu.com>

On Wed, Nov 11, 2015 at 06:34:28PM +0800, Cao jin wrote:
> From: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
> 
> Particularly, For vfio devices, Once need to recovery devices
> by bus reset such as AER, we always need to reset the host bus
> to recovery the devices under the bus, so we need to add pci device
> callbacks to specify to do host bus reset.
> 
> Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>


Reviewed-by: Michael S. Tsirkin <mst@redhat.com>

> ---
>  hw/pci/pci.c         | 18 ++++++++++++++++++
>  hw/pci/pci_bridge.c  |  9 +++++++++
>  hw/vfio/pci.c        | 26 ++++++++++++++++++++++++++
>  hw/vfio/pci.h        |  2 ++
>  include/hw/pci/pci.h |  7 +++++++
>  5 files changed, 62 insertions(+)
> 
> diff --git a/hw/pci/pci.c b/hw/pci/pci.c
> index f6ca6ef..64fa2cc 100644
> --- a/hw/pci/pci.c
> +++ b/hw/pci/pci.c
> @@ -247,6 +247,24 @@ static void pci_do_device_reset(PCIDevice *dev)
>      msix_reset(dev);
>  }
>  
> +void pci_device_pre_reset(PCIBus *bus, PCIDevice *dev, void *unused)
> +{
> +    PCIDeviceClass *dc = PCI_DEVICE_GET_CLASS(dev);
> +
> +    if (dc->pre_reset) {
> +        dc->pre_reset(dev);
> +    }
> +}
> +
> +void pci_device_post_reset(PCIBus *bus, PCIDevice *dev, void *unused)
> +{
> +    PCIDeviceClass *dc = PCI_DEVICE_GET_CLASS(dev);
> +
> +    if (dc->post_reset) {
> +        dc->post_reset(dev);
> +    }
> +}
> +
>  /*
>   * This function is called on #RST and FLR.
>   * FLR if PCI_EXP_DEVCTL_BCR_FLR is set
> diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
> index 40c97b1..ddb76ab 100644
> --- a/hw/pci/pci_bridge.c
> +++ b/hw/pci/pci_bridge.c
> @@ -267,8 +267,17 @@ void pci_bridge_write_config(PCIDevice *d,
>  
>      newctl = pci_get_word(d->config + PCI_BRIDGE_CONTROL);
>      if (~oldctl & newctl & PCI_BRIDGE_CTL_BUS_RESET) {
> +        /*
> +         * Notify all vfio-pci devices under the bus
> +         * should do physical bus reset.
> +         */
> +        PCIBus *sec_bus = pci_bridge_get_sec_bus(s);
> +        pci_for_each_device(sec_bus, pci_bus_num(sec_bus),
> +                            pci_device_pre_reset, NULL);
>          /* Trigger hot reset on 0->1 transition. */
>          qbus_reset_all(&s->sec_bus.qbus);
> +        pci_for_each_device(sec_bus, pci_bus_num(sec_bus),
> +                            pci_device_post_reset, NULL);
>      }
>  }
>  
> diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> index e619998..90df393 100644
> --- a/hw/vfio/pci.c
> +++ b/hw/vfio/pci.c
> @@ -39,6 +39,7 @@
>  
>  static void vfio_disable_interrupts(VFIOPCIDevice *vdev);
>  static void vfio_mmap_set_enabled(VFIOPCIDevice *vdev, bool enabled);
> +static int vfio_pci_hot_reset(VFIOPCIDevice *vdev, bool single);
>  
>  /*
>   * Disabling BAR mmaping can be slow, but toggling it around INTx can
> @@ -1879,6 +1880,8 @@ static int vfio_check_host_bus_reset(VFIOPCIDevice *vdev)
>      /* List all affected devices by bus reset */
>      devices = &info->devices[0];
>  
> +    vdev->single_depend_dev = (info->count == 1);
> +
>      /* Verify that we have all the groups required */
>      for (i = 0; i < info->count; i++) {
>          PCIHostDeviceAddress host;
> @@ -2003,10 +2006,26 @@ static int vfio_check_bus_reset(NotifierWithReturn *n, void *opaque)
>      return vfio_check_host_bus_reset(vdev);
>  }
>  
> +static void vfio_aer_pre_reset(PCIDevice *pdev)
> +{
> +    VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
> +
> +    vdev->aer_reset = true;
> +    vfio_pci_hot_reset(vdev, vdev->single_depend_dev);
> +}
> +
> +static void vfio_aer_post_reset(PCIDevice *pdev)
> +{
> +    VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
> +
> +    vdev->aer_reset = false;
> +}
> +
>  static int vfio_setup_aer(VFIOPCIDevice *vdev, uint8_t cap_ver,
>                            int pos, uint16_t size)
>  {
>      PCIDevice *pdev = &vdev->pdev;
> +    PCIDeviceClass *dc = PCI_DEVICE_GET_CLASS(pdev);
>      PCIDevice *dev_iter;
>      uint8_t type;
>      uint32_t errcap;
> @@ -2060,6 +2079,9 @@ static int vfio_setup_aer(VFIOPCIDevice *vdev, uint8_t cap_ver,
>      vdev->hotplug_notifier.notify = vfio_check_bus_reset;
>      pci_bus_add_hotplug_notifier(pdev->bus, &vdev->hotplug_notifier);
>  
> +    dc->pre_reset = vfio_aer_pre_reset;
> +    dc->post_reset = vfio_aer_post_reset;
> +
>      return 0;
>  
>  error:
> @@ -2953,6 +2975,10 @@ static void vfio_pci_reset(DeviceState *dev)
>  
>      trace_vfio_pci_reset(vdev->vbasedev.name);
>  
> +    if (vdev->aer_reset) {
> +        return;
> +    }
> +
>      vfio_pci_pre_reset(vdev);
>  
>      if (vdev->resetfn && !vdev->resetfn(vdev)) {
> diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
> index b385f07..1b89b83 100644
> --- a/hw/vfio/pci.h
> +++ b/hw/vfio/pci.h
> @@ -144,6 +144,8 @@ typedef struct VFIOPCIDevice {
>      bool no_kvm_msix;
>  
>      NotifierWithReturn hotplug_notifier;
> +    bool aer_reset;
> +    bool single_depend_dev;
>  } VFIOPCIDevice;
>  
>  uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);
> diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
> index 379b6e1..6b1f2d4 100644
> --- a/include/hw/pci/pci.h
> +++ b/include/hw/pci/pci.h
> @@ -105,6 +105,9 @@ typedef void PCIMapIORegionFunc(PCIDevice *pci_dev, int region_num,
>                                  pcibus_t addr, pcibus_t size, int type);
>  typedef void PCIUnregisterFunc(PCIDevice *pci_dev);
>  
> +typedef void PCIPreResetFunc(PCIDevice *pci_dev);
> +typedef void PCIPostResetFunc(PCIDevice *pci_dev);
> +
>  typedef struct PCIIORegion {
>      pcibus_t addr; /* current PCI mapping address. -1 means not mapped */
>  #define PCI_BAR_UNMAPPED (~(pcibus_t)0)
> @@ -193,6 +196,8 @@ typedef struct PCIDeviceClass {
>      PCIUnregisterFunc *exit;
>      PCIConfigReadFunc *config_read;
>      PCIConfigWriteFunc *config_write;
> +    PCIPreResetFunc *pre_reset;
> +    PCIPostResetFunc *post_reset;
>  
>      uint16_t vendor_id;
>      uint16_t device_id;
> @@ -380,6 +385,8 @@ bool pci_intx_route_changed(PCIINTxRoute *old, PCIINTxRoute *new);
>  void pci_bus_fire_intx_routing_notifier(PCIBus *bus);
>  void pci_device_set_intx_routing_notifier(PCIDevice *dev,
>                                            PCIINTxRoutingNotifier notifier);
> +void pci_device_pre_reset(PCIBus *bus, PCIDevice *d, void *opaque);
> +void pci_device_post_reset(PCIBus *bus, PCIDevice *d, void *opaque);
>  void pci_device_reset(PCIDevice *dev);
>  
>  PCIDevice *pci_nic_init_nofail(NICInfo *nd, PCIBus *rootbus,
> -- 
> 1.9.3

  reply	other threads:[~2015-11-11 17:02 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-11 10:34 [Qemu-devel] [PATCH v13 00/13] vfio-pci: pass the aer error to guest Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 01/13] vfio: extract vfio_get_hot_reset_info as a single function Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 02/13] vfio: squeeze out vfio_pci_do_hot_reset for support bus reset Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 03/13] pcie: modify the capability size assert Cao jin
2015-11-11 16:55   ` Michael S. Tsirkin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 04/13] vfio: make the 4 bytes aligned for capability size Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 05/13] vfio: add pcie extanded capability support Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 06/13] aer: impove pcie_aer_init to support vfio device Cao jin
2015-11-11 16:55   ` Michael S. Tsirkin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 07/13] vfio: add aer support for " Cao jin
2015-11-11 20:49   ` Alex Williamson
2015-11-12 11:54     ` Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 08/13] vfio: add check host bus reset is support or not Cao jin
2015-11-11 20:53   ` Alex Williamson
2015-11-12 11:56     ` Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 09/13] add check reset mechanism when hotplug vfio device Cao jin
2015-11-12 11:51   ` Michael S. Tsirkin
2015-11-13  3:28     ` Cao jin
2015-11-13 21:04       ` Alex Williamson
2015-11-16 10:18         ` Chen Fan
2015-11-16 16:05           ` Alex Williamson
2015-11-17  2:48             ` Chen Fan
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 10/13] pci: add pci device pre-post reset callbacks for host bus reset Cao jin
2015-11-11 16:56   ` Michael S. Tsirkin [this message]
2015-11-11 20:58   ` Alex Williamson
2015-11-12 11:58     ` Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 11/13] pcie_aer: expose pcie_aer_msg() interface Cao jin
2015-11-11 16:56   ` Michael S. Tsirkin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 12/13] vfio-pci: pass the aer error to guest Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 13/13] vfio: add 'aer' property to expose aercap Cao jin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151111185559-mutt-send-email-mst@redhat.com \
    --to=mst@redhat.com \
    --cc=alex.williamson@redhat.com \
    --cc=caoj.fnst@cn.fujitsu.com \
    --cc=chen.fan.fnst@cn.fujitsu.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).