Re: [Qemu-devel] [PATCH 4/4] target-ppc: Handle NMI guest exit

[David Gibson <david@gibson.dropbear.id.au>]

[-- Attachment #1: Type: text/plain, Size: 7157 bytes --]

On Wed, Nov 11, 2015 at 10:46:02PM +0530, Aravinda Prasad wrote:
> Memory error such as bit flips that cannot be corrected
> by hardware are passed on to the kernel for handling.
> If the memory address in error belongs to guest then
> guest kernel is responsible for taking suitable action.
> Patch [1] enhances KVM to exit guest with exit reason
> set to KVM_EXIT_NMI in such cases.
> 
> This patch handles KVM_EXIT_NMI exit. If the guest OS
> has registered the machine check handling routine by
> calling "ibm,nmi-register", then the handler builds
> the error log and invokes the registered handler else
> invokes the handler at 0x200.
> 
> [1] http://marc.info/?l=kvm-ppc&m=144726114408289
> 
> Signed-off-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
> ---
>  target-ppc/kvm.c     |   69 +++++++++++++++++++++++++++++++++++++++++++
>  target-ppc/kvm_ppc.h |   81 ++++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 150 insertions(+)
> 
> diff --git a/target-ppc/kvm.c b/target-ppc/kvm.c
> index 110436d..e2e5170 100644
> --- a/target-ppc/kvm.c
> +++ b/target-ppc/kvm.c
> @@ -1665,6 +1665,11 @@ int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run)
>          ret = 0;
>          break;
>  
> +    case KVM_EXIT_NMI:
> +        DPRINTF("handle NMI exception\n");
> +        ret = kvm_handle_nmi(cpu);
> +        break;
> +
>      default:
>          fprintf(stderr, "KVM: unknown exit reason %d\n", run->exit_reason);
>          ret = -1;
> @@ -2484,3 +2489,67 @@ int kvm_arch_msi_data_to_gsi(uint32_t data)
>  {
>      return data & 0xffff;
>  }
> +
> +int kvm_handle_nmi(PowerPCCPU *cpu)
> +{
> +    struct rtas_mc_log mc_log;
> +    CPUPPCState *env = &cpu->env;
> +    sPAPRMachineState *spapr = SPAPR_MACHINE(qdev_get_machine());
> +    PowerPCCPUClass *pcc = POWERPC_CPU_GET_CLASS(cpu);
> +
> +    cpu_synchronize_state(CPU(ppc_env_get_cpu(env)));
> +
> +    /* Properly set bits in MSR before we invoke the handler */
> +    env->msr = 0;
> +
> +    if (!(*pcc->interrupts_big_endian)(cpu)) {
> +        env->msr |= (1ULL << MSR_LE);
> +    }
> +
> +#ifdef TARGET_PPC64
> +    env->msr |= (1ULL << MSR_SF);
> +#endif

Surely this should depend on what the MSR actually was before, or at
the very least the cpu model, rather than just whether qemu has PPC64
support compiled in.

> +
> +    if (!spapr->guest_machine_check_addr) {
> +        /*
> +         * If OS has not registered with "ibm,nmi-register"
> +         * jump to 0x200
> +         */
> +        env->nip = 0x200;
> +        return 0;
> +    }
> +
> +    qemu_mutex_lock(&spapr->mc_in_progress);
> +
> +    /* Set error log fields */
> +    mc_log.r3 = env->gpr[3];
> +    mc_log.err_log.byte0 = 0;
> +    mc_log.err_log.byte1 =
> +        (RTAS_SEVERITY_ERROR_SYNC << RTAS_ELOG_SEVERITY_SHIFT);
> +    mc_log.err_log.byte1 |=
> +        (RTAS_DISP_NOT_RECOVERED << RTAS_ELOG_DISPOSITION_SHIFT);
> +    mc_log.err_log.byte2 =
> +        (RTAS_INITIATOR_MEMORY << RTAS_ELOG_INITIATOR_SHIFT);
> +    mc_log.err_log.byte2 |= RTAS_TARGET_MEMORY;
> +
> +    if (env->spr[SPR_DSISR] & P7_DSISR_MC_UE) {
> +        mc_log.err_log.byte3 = RTAS_TYPE_ECC_UNCORR;
> +    } else {
> +        mc_log.err_log.byte3 = 0;
> +    }
> +
> +    /* Handle all Host/Guest LE/BE combinations */
> +    if (env->msr & (1ULL << MSR_LE)) {
> +        mc_log.r3 = cpu_to_le64(mc_log.r3);
> +    } else {
> +        mc_log.r3 = cpu_to_be64(mc_log.r3);
> +    }
> +
> +    cpu_physical_memory_write(spapr->rtas_addr + RTAS_ERRLOG_OFFSET,
> +                              &mc_log, sizeof(mc_log));
> +
> +    env->nip = spapr->guest_machine_check_addr;
> +    env->gpr[3] = spapr->rtas_addr + RTAS_ERRLOG_OFFSET;
> +
> +    return 0;
> +}
> diff --git a/target-ppc/kvm_ppc.h b/target-ppc/kvm_ppc.h
> index 5c1d334..1172735 100644
> --- a/target-ppc/kvm_ppc.h
> +++ b/target-ppc/kvm_ppc.h
> @@ -53,6 +53,87 @@ void kvmppc_hash64_free_pteg(uint64_t token);
>  void kvmppc_hash64_write_pte(CPUPPCState *env, target_ulong pte_index,
>                               target_ulong pte0, target_ulong pte1);
>  bool kvmppc_has_cap_fixup_hcalls(void);
> +int kvm_handle_nmi(PowerPCCPU *cpu);
> +
> +/* Offset from rtas-base where error log is placed */
> +#define RTAS_ERRLOG_OFFSET       (0x200)
> +
> +#define RTAS_ELOG_SEVERITY_SHIFT         0x5
> +#define RTAS_ELOG_DISPOSITION_SHIFT      0x3
> +#define RTAS_ELOG_INITIATOR_SHIFT        0x4
> +
> +/*
> + * Only required RTAS event severity, disposition, initiator
> + * target and type are copied from arch/powerpc/include/asm/rtas.h
> + */
> +
> +/* RTAS event severity */
> +#define RTAS_SEVERITY_ERROR_SYNC    0x3
> +
> +/* RTAS event disposition */
> +#define RTAS_DISP_NOT_RECOVERED     0x2
> +
> +/* RTAS event initiator */
> +#define RTAS_INITIATOR_MEMORY       0x4
> +
> +/* RTAS event target */
> +#define RTAS_TARGET_MEMORY          0x4
> +
> +/* RTAS event type */
> +#define RTAS_TYPE_ECC_UNCORR        0x09
> +
> +/*
> + * Currently KVM only passes on the uncorrected machine
> + * check memory error to guest. Other machine check errors
> + * such as SLB multi-hit and TLB multi-hit are recovered
> + * in KVM and are not passed on to guest.
> + *
> + * DSISR Bit for uncorrected machine check error. Based
> + * on arch/powerpc/include/asm/mce.h
> + */
> +#define PPC_BIT(bit)                (0x8000000000000000ULL >> bit)
> +#define P7_DSISR_MC_UE              (PPC_BIT(48))  /* P8 too */
> +
> +/* Adopted from kernel source arch/powerpc/include/asm/rtas.h */
> +struct rtas_error_log {
> +    /* Byte 0 */
> +    uint8_t     byte0;          /* Architectural version */
> +
> +    /* Byte 1 */
> +    uint8_t     byte1;
> +    /* XXXXXXXX
> +     * XXX      3: Severity level of error
> +     *    XX    2: Degree of recovery
> +     *      X   1: Extended log present?
> +     *       XX 2: Reserved
> +     */
> +
> +    /* Byte 2 */
> +    uint8_t     byte2;
> +    /* XXXXXXXX
> +     * XXXX     4: Initiator of event
> +     *     XXXX 4: Target of failed operation
> +     */
> +    uint8_t     byte3;          /* General event or error*/
> +    __be32      extended_log_length;    /* length in bytes */
> +    unsigned char   buffer[1];      /* Start of extended log */
> +                                /* Variable length.      */
> +};
> +
> +/*
> + * Data format in RTAS-Blob
> + *
> + * This structure contains error information related to Machine
> + * Check exception. This is filled up and copied to rtas-blob
> + * upon machine check exception. The address of rtas-blob is
> + * passed on to OS registered machine check notification
> + * routines upon machine check exception
> + */
> +struct rtas_mc_log {
> +    target_ulong r3;
> +    struct rtas_error_log err_log;
> +};
> +
>  
>  #else
>  
> 

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]