Re: [Qemu-devel] [PATCH 08/10] hw/sd/pxa2xx_mmci: Update to use new SDBus APIs

[Peter Crosthwaite <crosthwaitepeter@gmail.com>]

On Fri, Dec 11, 2015 at 04:37:09PM +0000, Peter Maydell wrote:
> Now the PXA2xx MMCI device is QOMified itself, we can
> update it to use the SDBus APIs to talk to the SD card.
> 
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> ---
>  hw/sd/pxa2xx_mmci.c | 80 +++++++++++++++++++++++++++++++++++++++++++----------
>  1 file changed, 66 insertions(+), 14 deletions(-)
> 
> diff --git a/hw/sd/pxa2xx_mmci.c b/hw/sd/pxa2xx_mmci.c
> index b6bb390..a30be2b 100644
> --- a/hw/sd/pxa2xx_mmci.c
> +++ b/hw/sd/pxa2xx_mmci.c
> @@ -16,10 +16,14 @@
>  #include "hw/sd/sd.h"
>  #include "hw/qdev.h"
>  #include "hw/qdev-properties.h"
> +#include "qemu/error-report.h"
>  
>  #define TYPE_PXA2XX_MMCI "pxa2xx-mmci"
>  #define PXA2XX_MMCI(obj) OBJECT_CHECK(PXA2xxMMCIState, (obj), TYPE_PXA2XX_MMCI)
>  
> +#define TYPE_PXA2XX_MMCI_BUS "pxa2xx-mmci-bus"
> +#define PXA2XX_MMCI_BUS(obj) OBJECT_CHECK(SDBus, (obj), TYPE_PXA2XX_MMCI_BUS)
> +
>  typedef struct PXA2xxMMCIState {
>      SysBusDevice parent_obj;
>  
> @@ -27,9 +31,11 @@ typedef struct PXA2xxMMCIState {
>      qemu_irq irq;
>      qemu_irq rx_dma;
>      qemu_irq tx_dma;
> +    qemu_irq inserted;
> +    qemu_irq readonly;
>  
>      BlockBackend *blk;
> -    SDState *card;
> +    SDBus sdbus;
>  
>      uint32_t status;
>      uint32_t clkrt;
> @@ -129,7 +135,7 @@ static void pxa2xx_mmci_fifo_update(PXA2xxMMCIState *s)
>  
>      if (s->cmdat & CMDAT_WR_RD) {
>          while (s->bytesleft && s->tx_len) {
> -            sd_write_data(s->card, s->tx_fifo[s->tx_start ++]);
> +            sdbus_write_data(&s->sdbus, s->tx_fifo[s->tx_start++]);
>              s->tx_start &= 0x1f;
>              s->tx_len --;
>              s->bytesleft --;
> @@ -139,7 +145,7 @@ static void pxa2xx_mmci_fifo_update(PXA2xxMMCIState *s)
>      } else
>          while (s->bytesleft && s->rx_len < 32) {
>              s->rx_fifo[(s->rx_start + (s->rx_len ++)) & 0x1f] =
> -                sd_read_data(s->card);
> +                sdbus_read_data(&s->sdbus);
>              s->bytesleft --;
>              s->intreq |= INT_RXFIFO_REQ;
>          }
> @@ -173,7 +179,7 @@ static void pxa2xx_mmci_wakequeues(PXA2xxMMCIState *s)
>      request.arg = s->arg;
>      request.crc = 0;	/* FIXME */
>  
> -    rsplen = sd_do_command(s->card, &request, response);
> +    rsplen = sdbus_do_command(&s->sdbus, &request, response);
>      s->intreq |= INT_END_CMD;
>  
>      memset(s->resp_fifo, 0, sizeof(s->resp_fifo));
> @@ -482,32 +488,59 @@ PXA2xxMMCIState *pxa2xx_mmci_init(MemoryRegion *sysmem,
>                  BlockBackend *blk, qemu_irq irq,
>                  qemu_irq rx_dma, qemu_irq tx_dma)
>  {
> -    DeviceState *dev;
> +    DeviceState *dev, *carddev;
>      SysBusDevice *sbd;
>      PXA2xxMMCIState *s;
> +    Error *err = NULL;
>  
>      dev = qdev_create(NULL, TYPE_PXA2XX_MMCI);
>      s = PXA2XX_MMCI(dev);
> -    /* Reach into the device and initialize the SD card. This is
> -     * unclean but will vanish when we update to SDBus APIs.
> -     */
> -    s->card = sd_init(s->blk, false);
> -    if (s->card == NULL) {
> -        exit(1);
> -    }
> -    qdev_init_nofail(dev);
>      sbd = SYS_BUS_DEVICE(dev);
>      sysbus_mmio_map(sbd, 0, base);
>      sysbus_connect_irq(sbd, 0, irq);
>      sysbus_connect_irq(sbd, 1, rx_dma);
>      sysbus_connect_irq(sbd, 2, tx_dma);
> +
> +    /* Create and plug in the sd card */
> +    carddev = qdev_create(qdev_get_child_bus(dev, "sd-bus"), TYPE_SD);
> +    qdev_prop_set_drive(carddev, "drive", blk, &err);
> +    if (err) {
> +        error_report("failed to init SD card: %s", error_get_pretty(err));
> +        return NULL;
> +    }
> +    object_property_set_bool(OBJECT(carddev), true, "realized", &err);
> +    if (err) {
> +        error_report("failed to init SD card: %s", error_get_pretty(err));
> +        return NULL;
> +    }
> +
>      return s;
>  }
>  
> +static void pxa2xx_mmci_set_inserted(DeviceState *dev, bool inserted)
> +{
> +    PXA2xxMMCIState *s = PXA2XX_MMCI(dev);
> +
> +    qemu_set_irq(s->inserted, inserted);
> +}
> +
> +static void pxa2xx_mmci_set_readonly(DeviceState *dev, bool readonly)
> +{
> +    PXA2xxMMCIState *s = PXA2XX_MMCI(dev);
> +
> +    qemu_set_irq(s->readonly, readonly);
> +}
> +
>  void pxa2xx_mmci_handlers(PXA2xxMMCIState *s, qemu_irq readonly,
>                            qemu_irq coverswitch)
>  {
> -    sd_set_cb(s->card, readonly, coverswitch);
> +    DeviceState *dev = DEVICE(s);
> +
> +    s->readonly = readonly;
> +    s->inserted = coverswitch;
> +
> +    pxa2xx_mmci_set_inserted(dev, sdbus_get_inserted(&s->sdbus));
> +    pxa2xx_mmci_set_readonly(dev, sdbus_get_readonly(&s->sdbus));

Looking at the machine models, _mmci_handlers is only called at
machine init time. So this should not be needed. devices should be
triggering an initial call of _set_readonly that reliably propagates
back up.

If we do need these two lines they should be in the reset handler.

Regards,
Peter

>  }
>  
>  static void pxa2xx_mmci_instance_init(Object *obj)
> @@ -524,6 +557,17 @@ static void pxa2xx_mmci_instance_init(Object *obj)
>  
>      register_savevm(NULL, "pxa2xx_mmci", 0, 0,
>                      pxa2xx_mmci_save, pxa2xx_mmci_load, s);
> +
> +    qbus_create_inplace(&s->sdbus, sizeof(s->sdbus),
> +                        TYPE_PXA2XX_MMCI_BUS, DEVICE(obj), "sd-bus");
> +}
> +
> +static void pxa2xx_mmci_bus_class_init(ObjectClass *klass, void *data)
> +{
> +    SDBusClass *sbc = SD_BUS_CLASS(klass);
> +
> +    sbc->set_inserted = pxa2xx_mmci_set_inserted;
> +    sbc->set_readonly = pxa2xx_mmci_set_readonly;
>  }
>  
>  static const TypeInfo pxa2xx_mmci_info = {
> @@ -533,9 +577,17 @@ static const TypeInfo pxa2xx_mmci_info = {
>      .instance_init = pxa2xx_mmci_instance_init,
>  };
>  
> +static const TypeInfo pxa2xx_mmci_bus_info = {
> +    .name = TYPE_PXA2XX_MMCI_BUS,
> +    .parent = TYPE_SD_BUS,
> +    .instance_size = sizeof(SDBus),
> +    .class_init = pxa2xx_mmci_bus_class_init,
> +};
> +
>  static void pxa2xx_mmci_register_types(void)
>  {
>      type_register_static(&pxa2xx_mmci_info);
> +    type_register_static(&pxa2xx_mmci_bus_info);
>  }
>  
>  type_init(pxa2xx_mmci_register_types)
> -- 
> 1.9.1
>