qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Fam Zheng <famz@redhat.com>
To: Markus Armbruster <armbru@redhat.com>
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v3 18/24] vmdk: Clean up "Invalid extent lines" error message
Date: Tue, 22 Dec 2015 09:30:55 +0800	[thread overview]
Message-ID: <20151222013055.GB9331@ad.usersys.redhat.com> (raw)
In-Reply-To: <1450452927-8346-19-git-send-email-armbru@redhat.com>

On Fri, 12/18 16:35, Markus Armbruster wrote:
> vmdk_parse_extents() reports parse errors like this:
> 
>     error_setg(errp, "Invalid extent lines:\n%s", p);
> 
> where p points to the beginning of the malformed line in the image
> descriptor.  This results in a multi-line error message
> 
>     Invalid extent lines:
>     <first line that doesn't parse>
>     <remaining text that may or may not parse, if any>
> 
> Error messages should not have newlines embedded.  Since the remaining
> text is not helpful, we can simply report:
> 
>     Invalid extent line: <first line that doesn't parse>
> 
> Cc: Fam Zheng <famz@redhat.com>
> Signed-off-by: Markus Armbruster <armbru@redhat.com>
> Reviewed-by: Eric Blake <eblake@redhat.com>
> ---
>  block/vmdk.c               | 20 +++++++++++++-------
>  tests/qemu-iotests/059.out |  4 +---
>  2 files changed, 14 insertions(+), 10 deletions(-)
> 
> diff --git a/block/vmdk.c b/block/vmdk.c
> index 08fa3f3..2b5cb00 100644
> --- a/block/vmdk.c
> +++ b/block/vmdk.c
> @@ -780,7 +780,7 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
>      char access[11];
>      char type[11];
>      char fname[512];
> -    const char *p;
> +    const char *p, *np;
>      int64_t sectors = 0;
>      int64_t flat_offset;
>      char *extent_path;
> @@ -805,19 +805,16 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
>              continue;
>          } else if (!strcmp(type, "FLAT")) {
>              if (matches != 5 || flat_offset < 0) {
> -                error_setg(errp, "Invalid extent lines: \n%s", p);
> -                return -EINVAL;
> +                goto invalid;
>              }
>          } else if (!strcmp(type, "VMFS")) {
>              if (matches == 4) {
>                  flat_offset = 0;
>              } else {
> -                error_setg(errp, "Invalid extent lines:\n%s", p);
> -                return -EINVAL;
> +                goto invalid;
>              }
>          } else if (matches != 4) {
> -            error_setg(errp, "Invalid extent lines:\n%s", p);
> -            return -EINVAL;
> +            goto invalid;
>          }
>  
>          if (sectors <= 0 ||
> @@ -883,6 +880,15 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
>          extent->type = g_strdup(type);
>      }
>      return 0;
> +
> +invalid:
> +    np = next_line(p);
> +    assert(np != p);
> +    if (np[-1] == '\n') {
> +        np--;
> +    }
> +    error_setg(errp, "Invalid extent line: %.*s", (int)(np - p), p);
> +    return -EINVAL;
>  }
>  
>  static int vmdk_open_desc_file(BlockDriverState *bs, int flags, char *buf,
> diff --git a/tests/qemu-iotests/059.out b/tests/qemu-iotests/059.out
> index d28df5b..9d506cb 100644
> --- a/tests/qemu-iotests/059.out
> +++ b/tests/qemu-iotests/059.out
> @@ -2038,9 +2038,7 @@ Format specific information:
>              format: FLAT
>  
>  === Testing malformed VMFS extent description line ===
> -qemu-img: Could not open 'TEST_DIR/t.IMGFMT': Invalid extent lines:
> -RW 12582912 VMFS "dummy.IMGFMT" 1
> -
> +qemu-img: Could not open 'TEST_DIR/t.IMGFMT': Invalid extent line: RW 12582912 VMFS "dummy.IMGFMT" 1
>  
>  === Testing truncated sparse ===
>  Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=107374182400 subformat=monolithicSparse
> -- 
> 2.4.3
> 

Reviewed-by: Fam Zheng <famz@redhat.com>

  reply	other threads:[~2015-12-22  1:31 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-18 15:35 [Qemu-devel] [PATCH v3 00/24] Error reporting cleanups and fixes Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 01/24] qemu-nbd: Replace BSDism <err.h> by error_report() Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 02/24] error: Use error_report_err() where appropriate (again) Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 03/24] error: Use error_report_err() instead of monitor_printf() Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 04/24] error: Use error_report_err() instead of ad hoc prints Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 05/24] error: Improve documentation Markus Armbruster
2015-12-18 15:51   ` Eric Blake
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 06/24] block: Clean up "Could not create temporary overlay" error message Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 07/24] qemu-nbd: Clean up "Failed to load snapshot" " Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 08/24] test-throttle: Simplify qemu_init_main_loop() error handling Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 09/24] error: New error_prepend(), error_reportf_err() Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 10/24] error: Don't decorate original error message when adding to it Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 11/24] error: Use error_reportf_err() where it makes obvious sense Markus Armbruster
2015-12-18 16:08   ` Eric Blake
2015-12-18 16:22     ` Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 12/24] error: Use error_prepend() " Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 13/24] spapr: Use error_reportf_err() Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 14/24] migration: Use error_reportf_err() instead of monitor_printf() Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 15/24] qemu-io qemu-nbd: Use error_report() etc. instead of fprintf() Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 16/24] error: Strip trailing '\n' from error string arguments (again) Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 17/24] vmdk: Clean up control flow in vmdk_parse_extents() a bit Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 18/24] vmdk: Clean up "Invalid extent lines" error message Markus Armbruster
2015-12-22  1:30   ` Fam Zheng [this message]
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 19/24] pci-assign: Clean up "Failed to assign" error messages Markus Armbruster
2016-01-04 15:44   ` Laszlo Ersek
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 20/24] vhdx: Fix "log that needs to be replayed" error message Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 21/24] error: Clean up errors with embedded newlines (again) Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 22/24] hw/s390x: Rename local variables Error *l_err to just err Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 23/24] s390/sclp: Simplify control flow in sclp_realize() Markus Armbruster
2015-12-18 15:35 ` [Qemu-devel] [PATCH v3 24/24] error: Consistently name Error * objects err, and not errp Markus Armbruster
2015-12-18 16:11   ` Eric Blake

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151222013055.GB9331@ad.usersys.redhat.com \
    --to=famz@redhat.com \
    --cc=armbru@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).