From: Aurelien Jarno <aurelien@aurel32.net>
To: Richard Henderson <rth@twiddle.net>
Cc: mark.cave-ayland@ilande.co.uk, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v2 11/14] tcg: Implement indirect memory registers
Date: Thu, 31 Dec 2015 12:54:30 +0100 [thread overview]
Message-ID: <20151231115430.GF360@aurel32.net> (raw)
In-Reply-To: <1450382429-6019-1-git-send-email-rth@twiddle.net>
On 2015-12-17 12:00, Richard Henderson wrote:
> That is, global_mem registers whose base is another global_mem
> register, rather than a fixed register.
>
> Signed-off-by: Richard Henderson <rth@twiddle.net>
> ---
> tcg/tcg.c | 95 ++++++++++++++++++++++++++++++++++++++++++++-------------------
> tcg/tcg.h | 2 ++
> 2 files changed, 68 insertions(+), 29 deletions(-)
>
> diff --git a/tcg/tcg.c b/tcg/tcg.c
> index c51e0ec..7150a3f 100644
> --- a/tcg/tcg.c
> +++ b/tcg/tcg.c
> @@ -509,17 +509,23 @@ int tcg_global_mem_new_internal(TCGType type, TCGv_ptr base,
> TCGContext *s = &tcg_ctx;
> TCGTemp *base_ts = &s->temps[GET_TCGV_PTR(base)];
> TCGTemp *ts = tcg_global_alloc(s);
> - int bigendian = 0;
> + int indirect_reg = 0, bigendian = 0;
> #ifdef HOST_WORDS_BIGENDIAN
> bigendian = 1;
> #endif
>
> + if (!base_ts->fixed_reg) {
> + indirect_reg = 1;
> + base_ts->indirect_base = 1;
> + }
> +
> if (TCG_TARGET_REG_BITS == 32 && type == TCG_TYPE_I64) {
> TCGTemp *ts2 = tcg_global_alloc(s);
> char buf[64];
>
> ts->base_type = TCG_TYPE_I64;
> ts->type = TCG_TYPE_I32;
> + ts->indirect_reg = indirect_reg;
Do we really need to add this new bit, while we can simply test
ts->mem_base->fixed_reg? This means one more derefence, but anyway it
has to be done later when calling temp_load?
> ts->mem_allocated = 1;
> ts->mem_base = base_ts;
> ts->mem_offset = offset + bigendian * 4;
> @@ -1781,13 +1803,16 @@ static inline void temp_save(TCGContext *s, TCGTemp *ts,
> TCGRegSet allocated_regs)
> {
> #ifdef USE_LIVENESS_ANALYSIS
> - /* The liveness analysis already ensures that globals are back
> - in memory. Keep an assert for safety. */
> - tcg_debug_assert(ts->val_type == TEMP_VAL_MEM || ts->fixed_reg);
> -#else
> + /* ??? Liveness does not yet incorporate indirect bases. */
> + if (!ts->indirect_base) {
> + /* The liveness analysis already ensures that globals are back
> + in memory. Keep an assert for safety. */
> + tcg_debug_assert(ts->val_type == TEMP_VAL_MEM || ts->fixed_reg);
> + return;
> + }
This basically disables the assert. What does it mean in practice? Can
it generates bad code?
> +#endif
> temp_sync(s, ts, allocated_regs);
> temp_dead(s, ts);
> -#endif
> }
>
> /* save globals to their canonical location and assume they can be
> @@ -1812,12 +1837,15 @@ static void sync_globals(TCGContext *s, TCGRegSet allocated_regs)
> for (i = 0; i < s->nb_globals; i++) {
> TCGTemp *ts = &s->temps[i];
> #ifdef USE_LIVENESS_ANALYSIS
> - tcg_debug_assert(ts->val_type != TEMP_VAL_REG
> - || ts->fixed_reg
> - || ts->mem_coherent);
> -#else
> - temp_sync(s, ts, allocated_regs);
> + /* ??? Liveness does not yet incorporate indirect bases. */
> + if (!ts->indirect_base) {
> + tcg_debug_assert(ts->val_type != TEMP_VAL_REG
> + || ts->fixed_reg
> + || ts->mem_coherent);
> + continue;
> + }
Same here.
> #endif
> + temp_sync(s, ts, allocated_regs);
> }
> }
>
> @@ -1833,12 +1861,15 @@ static void tcg_reg_alloc_bb_end(TCGContext *s, TCGRegSet allocated_regs)
> temp_save(s, ts, allocated_regs);
> } else {
> #ifdef USE_LIVENESS_ANALYSIS
> - /* The liveness analysis already ensures that temps are dead.
> - Keep an assert for safety. */
> - assert(ts->val_type == TEMP_VAL_DEAD);
> -#else
> - temp_dead(s, ts);
> + /* ??? Liveness does not yet incorporate indirect bases. */
> + if (!ts->indirect_base) {
> + /* The liveness analysis already ensures that temps are dead.
> + Keep an assert for safety. */
> + assert(ts->val_type == TEMP_VAL_DEAD);
> + continue;
> + }
And here.
> #endif
> + temp_dead(s, ts);
> }
> }
>
--
Aurelien Jarno GPG: 4096R/1DDD8C9B
aurelien@aurel32.net http://www.aurel32.net
next prev parent reply other threads:[~2015-12-31 11:59 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-17 19:58 [Qemu-devel] [PATCH v2 00/14] tcg: Improve sparc register windows Richard Henderson
2015-12-17 20:00 ` [Qemu-devel] [PATCH v2 02/14] tcg: Change ts->mem_reg to ts->mem_base Richard Henderson
2015-12-31 10:52 ` Aurelien Jarno
2015-12-17 20:00 ` [Qemu-devel] [PATCH v2 03/14] tcg: Tidy temporary allocation Richard Henderson
2015-12-31 11:13 ` Aurelien Jarno
2015-12-17 20:00 ` [Qemu-devel] [PATCH v2 04/14] tcg: More use of TCGReg where appropriate Richard Henderson
2015-12-31 11:14 ` Aurelien Jarno
2015-12-17 20:00 ` [Qemu-devel] [PATCH v2 05/14] tcg: Remove tcg_get_arg_str_i32/64 Richard Henderson
2015-12-31 11:15 ` Aurelien Jarno
2015-12-17 20:00 ` [Qemu-devel] [PATCH v2 06/14] tcg: Change reg_to_temp to TCGTemp pointer Richard Henderson
2015-12-31 11:19 ` Aurelien Jarno
2015-12-17 20:00 ` [Qemu-devel] [PATCH v2 07/14] tcg: Change temp_dead argument to TCGTemp Richard Henderson
2015-12-31 11:24 ` Aurelien Jarno
2015-12-17 20:00 ` [Qemu-devel] [PATCH v2 08/14] tcg: Change temp_sync " Richard Henderson
2015-12-31 11:24 ` Aurelien Jarno
2015-12-17 20:00 ` [Qemu-devel] [PATCH v2 09/14] tcg: Change temp_save " Richard Henderson
2015-12-31 11:24 ` Aurelien Jarno
2015-12-17 20:00 ` [Qemu-devel] [PATCH v2 10/14] tcg: Introduce temp_load Richard Henderson
2015-12-31 11:33 ` Aurelien Jarno
2016-01-15 22:08 ` Richard Henderson
2015-12-17 20:00 ` [Qemu-devel] [PATCH v2 11/14] tcg: Implement indirect memory registers Richard Henderson
2015-12-31 11:54 ` Aurelien Jarno [this message]
2016-01-15 22:31 ` Richard Henderson
2015-12-17 20:00 ` [Qemu-devel] [PATCH v2 12/14] tcg: Allocate indirect_base temporaries in a different order Richard Henderson
2015-12-17 20:00 ` [Qemu-devel] [PATCH v2 13/14] target-sparc: Tidy global register initialization Richard Henderson
2015-12-17 20:00 ` [Qemu-devel] [PATCH v2 14/14] target-sparc: Use global registers for the register window Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151231115430.GF360@aurel32.net \
--to=aurelien@aurel32.net \
--cc=mark.cave-ayland@ilande.co.uk \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).