qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Wei Liu <wei.liu2@citrix.com>
To: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Wei Liu <wei.liu2@citrix.com>,
	"Michael S. Tsirkin" <mst@redhat.com>,
	qemu-devel@nongnu.org, Alexander Graf <agraf@suse.de>,
	Christian Borntraeger <borntraeger@de.ibm.com>,
	Cornelia Huck <cornelia.huck@de.ibm.com>,
	Richard Henderson <rth@twiddle.net>,
	Greg Kurz <gkurz@linux.vnet.ibm.com>
Subject: Re: [Qemu-devel] [PATCH v2 27/27] 9pfs: disentangle V9fsState
Date: Fri, 8 Jan 2016 18:54:12 +0000	[thread overview]
Message-ID: <20160108185412.GA14080@citrix.com> (raw)
In-Reply-To: <87poxca9ge.fsf@linux.vnet.ibm.com>

On Fri, Jan 08, 2016 at 11:39:37AM +0530, Aneesh Kumar K.V wrote:
> Wei Liu <wei.liu2@citrix.com> writes:
> 
> > V9fsState now only contains generic fields. Introduce V9fsVirtioState
> > for virtio transport.  Change virtio-pci and virtio-ccw to use
> > V9fsVirtioState. Handle transport enumeration in generic routines.
> >
> 
> Few comments below
> 
> 
> > Signed-off-by: Wei Liu <wei.liu2@citrix.com>
> > ---
> >  hw/9pfs/9p.c               | 41 ++++++++++++++++++-----
> >  hw/9pfs/9p.h               | 19 +++++++----
> >  hw/9pfs/virtio-9p-device.c | 82 ++++++++++++++++++++++++++++------------------
> >  hw/9pfs/virtio-9p.h        | 12 ++++++-
> >  hw/s390x/virtio-ccw.h      |  2 +-
> >  hw/virtio/virtio-pci.h     |  2 +-
> >  6 files changed, 109 insertions(+), 49 deletions(-)
> >
> > diff --git a/hw/9pfs/9p.c b/hw/9pfs/9p.c
> > index 6858b21..2cf8580 100644
> > --- a/hw/9pfs/9p.c
> > +++ b/hw/9pfs/9p.c
> > @@ -45,7 +45,13 @@ ssize_t pdu_marshal(V9fsPDU *pdu, size_t offset, const char *fmt, ...)
> >      va_list ap;
> >
> >      va_start(ap, fmt);
> > -    ret = virtio_pdu_vmarshal(pdu, offset, fmt, ap);
> > +    switch (pdu->transport) {
> > +    case VIRTIO:
> > +        ret = virtio_pdu_vmarshal(pdu, offset, fmt, ap);
> > +        break;
> > +    default:
> > +        ret = -1;
> > +    }
> >      va_end(ap);
> >
> 
> 
> All that switch(pdu->transport) can go in the next series along with Xen
> support. It is not really needed now and when we complete Xen transport
> we will pull that. 
> 

No problem.

> >      return ret;
> > @@ -57,7 +63,13 @@ ssize_t pdu_unmarshal(V9fsPDU *pdu, size_t offset, const char *fmt, ...)
> >      va_list ap;
> >
> >      va_start(ap, fmt);
> > -    ret = virtio_pdu_vunmarshal(pdu, offset, fmt, ap);
> > +    switch (pdu->transport) {
> > +    case VIRTIO:
> > +        ret = virtio_pdu_vunmarshal(pdu, offset, fmt, ap);
> > +        break;
> > +    default:
> > +        ret = -1;
> > +    }
> >      va_end(ap);
> >
> >      return ret;
> > @@ -65,7 +77,11 @@ ssize_t pdu_unmarshal(V9fsPDU *pdu, size_t offset, const char *fmt, ...)
> >
> >  static void pdu_push_and_notify(V9fsPDU *pdu)
> >  {
> > -    virtio_9p_push_and_notify(pdu);
> > +    switch (pdu->transport) {
> > +    case VIRTIO:
> > +        virtio_9p_push_and_notify(pdu);
> > +        break;
> > +    }
> >  }
> >
> >  static int omode_to_uflags(int8_t mode)
> > @@ -1696,7 +1712,11 @@ static void v9fs_init_qiov_from_pdu(QEMUIOVector *qiov, V9fsPDU *pdu,
> >      struct iovec *iov;
> >      unsigned int niov;
> >
> > -    virtio_init_iov_from_pdu(pdu, &iov, &niov, is_write);
> > +    switch (pdu->transport) {
> > +    case VIRTIO:
> > +        virtio_init_iov_from_pdu(pdu, &iov, &niov, is_write);
> > +        break;
> > +    }
> >
> >      qemu_iovec_init_external(&elem, iov, niov);
> >      qemu_iovec_init(qiov, niov);
> > @@ -3272,8 +3292,10 @@ void pdu_submit(V9fsPDU *pdu)
> >  }
> >
> >  /* Returns 0 on success, 1 on failure. */
> > -int v9fs_device_realize_common(V9fsState *s, Error **errp)
> > +int v9fs_device_realize_common(V9fsState *s, enum p9_transport transport,
> > +                               Error **errp)
> >  {
> > +    V9fsVirtioState *v = container_of(s, V9fsVirtioState, state);
> >      int i, len;
> >      struct stat stat;
> >      FsDriverEntry *fse;
> > @@ -3284,8 +3306,10 @@ int v9fs_device_realize_common(V9fsState *s, Error **errp)
> >      QLIST_INIT(&s->free_list);
> >      QLIST_INIT(&s->active_list);
> >      for (i = 0; i < (MAX_REQ - 1); i++) {
> > -        QLIST_INSERT_HEAD(&s->free_list, &s->pdus[i], next);
> > -        s->pdus[i].s = s;
> > +        QLIST_INSERT_HEAD(&s->free_list, &v->pdus[i], next);
> > +        v->pdus[i].s = s;
> > +        v->pdus[i].idx = i;
> > +        v->pdus[i].transport = transport;
> >      }
> >
> >      v9fs_path_init(&path);
> > @@ -3360,7 +3384,8 @@ out:
> >      return rc;
> >  }
> >
> > -void v9fs_device_unrealize_common(V9fsState *s, Error **errp)
> > +void v9fs_device_unrealize_common(V9fsState *s, enum p9_transport transport,
> > +                                  Error **errp)
> >  {
> >      g_free(s->ctx.fs_root);
> >      g_free(s->tag);
> > diff --git a/hw/9pfs/9p.h b/hw/9pfs/9p.h
> > index 3fe4da4..bd8588d 100644
> > --- a/hw/9pfs/9p.h
> > +++ b/hw/9pfs/9p.h
> > @@ -14,6 +14,10 @@
> >  #include "qemu/thread.h"
> >  #include "qemu/coroutine.h"
> >
> > +enum p9_transport {
> > +    VIRTIO = 0x1,
> > +};
> > +
> >  enum {
> >      P9_TLERROR = 6,
> >      P9_RLERROR,
> > @@ -131,9 +135,10 @@ struct V9fsPDU
> >      uint8_t id;
> >      uint8_t cancelled;
> >      CoQueue complete;
> > -    VirtQueueElement elem;
> >      struct V9fsState *s;
> >      QLIST_ENTRY(V9fsPDU) next;
> > +    uint32_t idx; /* index inside the array */
> > +    enum p9_transport transport;
> >  };
> >
> 
> 
> Can you do this change as a separate patch ? ie, Make V9fsPDU
> independent of virtio . Also introduce V9fsVirtioState 
> 

No problem.

Wei.

> 
> >
> > @@ -205,16 +210,12 @@ struct V9fsFidState
> >
> 
> -aneesh
> 

  reply	other threads:[~2016-01-08 18:54 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-07 19:55 [Qemu-devel] [PATCH v2 00/27] 9pfs: disentangling virtio and generic code Wei Liu
2016-01-07 19:55 ` [Qemu-devel] [PATCH v2 01/27] 9pfs: rename virtio-9p-coth.{c, h} to coth.{c, h} Wei Liu
2016-01-07 19:55 ` [Qemu-devel] [PATCH v2 02/27] 9pfs: rename virtio-9p-handle.c to 9p-handle.c Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 03/27] 9pfs: rename virtio-9p-local.c to 9p-local.c Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 04/27] 9pfs: rename virtio-9p-posix-acl.c to 9p-posix-acl.c Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 05/27] 9pfs: rename virtio-9p-proxy.{c, h} to 9p-proxy.{c, h} Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 06/27] 9pfs: rename virtio-9p-synth.{c, h} to 9p-synth.{c, h} Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 07/27] 9pfs: rename virtio-9p-xattr{, -user}.{c, h} to 9p-xattr{, -user}.{c, h} Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 08/27] 9pfs: merge hw/virtio/virtio-9p.h into hw/9pfs/virtio-9p.h Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 09/27] 9pfs: remove dead code Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 10/27] fsdev: break out 9p-marshal.{c, h} from virtio-9p-marshal.{c, h} Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 11/27] fsdev: 9p-marshal: introduce V9fsBlob Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 12/27] 9pfs: use V9fsBlob to transmit xattr Wei Liu
2016-01-08  8:30   ` Aneesh Kumar K.V
2016-01-08 17:56     ` Wei Liu
2016-01-08 18:48       ` Aneesh Kumar K.V
2016-01-08 18:54         ` Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 13/27] fsdev: rename virtio-9p-marshal.{c, h} to 9p-iov-marshal.{c, h} Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 14/27] 9pfs: PDU processing functions don't need to take V9fsState as argument Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 15/27] 9pfs: PDU processing functions should start pdu_ prefix Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 16/27] 9pfs: make pdu_{, un}marshal proper functions Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 17/27] 9pfs: factor out virtio_pdu_{, un}marshal Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 18/27] 9pfs: factor out pdu_push_and_notify Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 19/27] 9pfs: break out virtio_init_iov_from_pdu Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 20/27] 9pfs: break out 9p.h from virtio-9p.h Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 21/27] 9pfs: factor out virtio_9p_push_and_notify Wei Liu
2016-01-08  9:57   ` Aneesh Kumar K.V
2016-01-08 17:57     ` Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 22/27] 9pfs: export pdu_{submit, alloc, free} Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 23/27] 9pfs: move handle_9p_output and make it static function Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 24/27] 9pfs: rename virtio_9p_set_fd_limit to use v9fs_ prefix Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 25/27] 9pfs: rename virtio-9p.c to 9p.c Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 26/27] 9pfs: factor out v9fs_device_{, un}realize_common Wei Liu
2016-01-07 19:56 ` [Qemu-devel] [PATCH v2 27/27] 9pfs: disentangle V9fsState Wei Liu
2016-01-08  6:09   ` Aneesh Kumar K.V
2016-01-08 18:54     ` Wei Liu [this message]
2016-01-08 10:49 ` [Qemu-devel] [PATCH v2 00/27] 9pfs: disentangling virtio and generic code Aneesh Kumar K.V
2016-01-08 18:54   ` Wei Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160108185412.GA14080@citrix.com \
    --to=wei.liu2@citrix.com \
    --cc=agraf@suse.de \
    --cc=aneesh.kumar@linux.vnet.ibm.com \
    --cc=borntraeger@de.ibm.com \
    --cc=cornelia.huck@de.ibm.com \
    --cc=gkurz@linux.vnet.ibm.com \
    --cc=mst@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=rth@twiddle.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).