From: Zhen Ning Lim <limzn88@gmail.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [Bug 1588328] [NEW] Qemu 2.6 Solaris 9 Sparc Segmentation Fault
Date: Thu, 02 Jun 2016 11:58:09 -0000 [thread overview]
Message-ID: <20160602115809.16901.66842.malonedeb@gac.canonical.com> (raw)
Public bug reported:
Hi,
I tried the following command to boot Solaris 9 sparc:
qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server
It seems there are a few Segmentation Faults, one from the starting of
the boot. Another at the beginning of the commandline installation.
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Configuration device id QEMU version 1 machine id 32
Probing SBus slot 0 offset 0
Probing SBus slot 1 offset 0
Probing SBus slot 2 offset 0
Probing SBus slot 3 offset 0
Probing SBus slot 4 offset 0
Probing SBus slot 5 offset 0
Invalid FCode start byte
CPUs: 1 x FMI,MB86904
UUID: 00000000-0000-0000-0000-000000000000
Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
Type 'help' for detailed information
Trying cdrom:d...
Not a bootable ELF image
Loading a.out image...
Loaded 7680 bytes
entry point is 0x4000
bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d
Jumping to entry point 00004000 for type 00000005...
switching to new context:
SunOS Release 5.9 Version Generic_118558-34 32-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
Corrupt label; wrong magic number
Segmentation Fault
Configuring /dev and /devices
NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
audio may not work correctly until it is stopped and restarted
Segmentation Fault
Using RPC Bootparams for network configuration information.
Skipping interface le0
Searching for configuration file(s)...
Search complete.
....
What type of terminal are you using?
1) ANSI Standard CRT
2) DEC VT52
3) DEC VT100
4) Heathkit 19
5) Lear Siegler ADM31
6) PC Console
7) Sun Command Tool
8) Sun Workstation
9) Televideo 910
10) Televideo 925
11) Wyse Model 50
12) X Terminal Emulator (xterms)
13) CDE Terminal Emulator (dtterm)
14) Other
Type the number of your choice and press Return: 3
syslog service starting.
savecore: no dump device configured
Running in command line mode
/sbin/disk0_install[109]: 143 Segmentation Fault
/sbin/run_install[130]: 155 Segmentation Fault
** Affects: qemu
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1588328
Title:
Qemu 2.6 Solaris 9 Sparc Segmentation Fault
Status in QEMU:
New
Bug description:
Hi,
I tried the following command to boot Solaris 9 sparc:
qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server
It seems there are a few Segmentation Faults, one from the starting of
the boot. Another at the beginning of the commandline installation.
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Configuration device id QEMU version 1 machine id 32
Probing SBus slot 0 offset 0
Probing SBus slot 1 offset 0
Probing SBus slot 2 offset 0
Probing SBus slot 3 offset 0
Probing SBus slot 4 offset 0
Probing SBus slot 5 offset 0
Invalid FCode start byte
CPUs: 1 x FMI,MB86904
UUID: 00000000-0000-0000-0000-000000000000
Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19
Type 'help' for detailed information
Trying cdrom:d...
Not a bootable ELF image
Loading a.out image...
Loaded 7680 bytes
entry point is 0x4000
bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@2,0:d
Jumping to entry point 00004000 for type 00000005...
switching to new context:
SunOS Release 5.9 Version Generic_118558-34 32-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 (sd0):
Corrupt label; wrong magic number
Segmentation Fault
Configuring /dev and /devices
NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88)
audio may not work correctly until it is stopped and restarted
Segmentation Fault
Using RPC Bootparams for network configuration information.
Skipping interface le0
Searching for configuration file(s)...
Search complete.
....
What type of terminal are you using?
1) ANSI Standard CRT
2) DEC VT52
3) DEC VT100
4) Heathkit 19
5) Lear Siegler ADM31
6) PC Console
7) Sun Command Tool
8) Sun Workstation
9) Televideo 910
10) Televideo 925
11) Wyse Model 50
12) X Terminal Emulator (xterms)
13) CDE Terminal Emulator (dtterm)
14) Other
Type the number of your choice and press Return: 3
syslog service starting.
savecore: no dump device configured
Running in command line mode
/sbin/disk0_install[109]: 143 Segmentation Fault
/sbin/run_install[130]: 155 Segmentation Fault
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions
next reply other threads:[~2016-06-02 12:05 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-02 11:58 Zhen Ning Lim [this message]
2016-06-02 20:45 ` [Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault Mark Cave-Ayland
2016-06-04 4:40 ` Zhen Ning Lim
2016-06-04 12:45 ` Mark Cave-Ayland
2016-06-05 6:04 ` Zhen Ning Lim
2016-06-14 3:34 ` Zhen Ning Lim
2016-06-14 21:44 ` Mark Cave-Ayland
2016-06-17 11:42 ` Artyom Tarasenko
2016-06-17 12:35 ` Mark Cave-Ayland
2016-06-24 18:03 ` Mark Cave-Ayland
2016-06-28 4:38 ` Zhen Ning Lim
2016-06-28 21:26 ` Mark Cave-Ayland
2016-06-29 7:04 ` Zhen Ning Lim
2016-06-29 10:58 ` Mark Cave-Ayland
2016-06-29 14:32 ` Zhen Ning Lim
2016-06-29 20:33 ` Mark Cave-Ayland
2016-06-30 4:22 ` Zhen Ning Lim
2016-06-30 6:48 ` Mark Cave-Ayland
2016-06-30 8:33 ` Zhen Ning Lim
2016-06-30 9:40 ` Zhen Ning Lim
2016-06-30 13:41 ` Zhen Ning Lim
2016-07-01 16:26 ` Mark Cave-Ayland
2016-07-02 11:28 ` Zhen Ning Lim
2016-07-02 15:18 ` Mark Cave-Ayland
2016-07-02 18:13 ` Mark Cave-Ayland
2016-07-03 6:29 ` Zhen Ning Lim
2016-07-07 13:47 ` Mark Cave-Ayland
2017-01-19 14:25 ` Thomas Huth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160602115809.16901.66842.malonedeb@gac.canonical.com \
--to=limzn88@gmail.com \
--cc=1588328@bugs.launchpad.net \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).