From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Igor Mammedov <imammedo@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Richard Henderson <rth@twiddle.net>,
Eduardo Habkost <ehabkost@redhat.com>
Subject: [Qemu-devel] [PULL 28/34] pc: acpi: drop intermediate PCMachineState.node_cpu
Date: Fri, 24 Jun 2016 08:55:42 +0300 [thread overview]
Message-ID: <20160624085542-mutt-send-email-mst@redhat.com> (raw)
In-Reply-To: <1466747621-4342-1-git-send-email-mst@redhat.com>
From: Igor Mammedov <imammedo@redhat.com>
PCMachineState.node_cpu was used for mapping APIC ID
to numa node id as CPU entries in SRAT used to be
built on sparse APIC ID bitmap (up to apic_id_limit).
However since commit
5803fce pc: acpi: SRAT: create only valid processor lapic entries
CPU entries in SRAT aren't build using apic bitmap
but using 0..maxcpus index instead which is also used
for creating numa_info[x].node_cpu map.
So instead of doing useless intermediate conversion from
1. node by cpu index -> node by apic id
i.e. numa_info[x].node_cpu -> PCMachineState.node_cpu
2. apic id -> srat entry PMX
PCMachineState.node_cpu[apic id] -> PMX value
use numa_info[x].node_cpu map directly like ARM does and do
1. numa_info[x].node_cpu -> PMX value using index
in range 0..maxcpus
and drop not necessary PCMachineState.node_cpu and related
code.
That also removes the last (not counting legacy hotplug)
dependency of ACPI code on apic_id_limit and need to allocate
huge sparse PCMachineState.node_cpu array in case of 32-bit
APIC IDs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
include/hw/i386/pc.h | 1 -
hw/i386/acpi-build.c | 11 ++++++++---
hw/i386/pc.c | 16 +---------------
3 files changed, 9 insertions(+), 19 deletions(-)
diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h
index 884224e..948ed0c 100644
--- a/include/hw/i386/pc.h
+++ b/include/hw/i386/pc.h
@@ -72,7 +72,6 @@ struct PCMachineState {
/* NUMA information: */
uint64_t numa_nodes;
uint64_t *node_mem;
- uint64_t *node_cpu;
};
#define PC_MACHINE_ACPI_DEVICE_PROP "acpi-device"
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 20e5b49..5a594be 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -44,6 +44,7 @@
#include "hw/acpi/tpm.h"
#include "sysemu/tpm_backend.h"
#include "hw/timer/mc146818rtc_regs.h"
+#include "sysemu/numa.h"
/* Supported chipsets: */
#include "hw/acpi/piix4.h"
@@ -2328,7 +2329,6 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
AcpiSratMemoryAffinity *numamem;
int i;
- uint64_t curnode;
int srat_start, numa_start, slots;
uint64_t mem_len, mem_base, next_base;
MachineClass *mc = MACHINE_GET_CLASS(machine);
@@ -2344,14 +2344,19 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
srat->reserved1 = cpu_to_le32(1);
for (i = 0; i < apic_ids->len; i++) {
+ int j;
int apic_id = apic_ids->cpus[i].arch_id;
core = acpi_data_push(table_data, sizeof *core);
core->type = ACPI_SRAT_PROCESSOR_APIC;
core->length = sizeof(*core);
core->local_apic_id = apic_id;
- curnode = pcms->node_cpu[apic_id];
- core->proximity_lo = curnode;
+ for (j = 0; j < nb_numa_nodes; j++) {
+ if (test_bit(i, numa_info[j].node_cpu)) {
+ core->proximity_lo = j;
+ break;
+ }
+ }
memset(core->proximity_hi, 0, 3);
core->local_sapic_eid = 0;
core->flags = cpu_to_le32(1);
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index dbfba5c..b8fead3 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -1179,7 +1179,7 @@ void pc_machine_done(Notifier *notifier, void *data)
void pc_guest_info_init(PCMachineState *pcms)
{
- int i, j;
+ int i;
pcms->apic_xrupt_override = kvm_allows_irq0_override();
pcms->numa_nodes = nb_numa_nodes;
@@ -1189,20 +1189,6 @@ void pc_guest_info_init(PCMachineState *pcms)
pcms->node_mem[i] = numa_info[i].node_mem;
}
- pcms->node_cpu = g_malloc0(pcms->apic_id_limit *
- sizeof *pcms->node_cpu);
-
- for (i = 0; i < max_cpus; i++) {
- unsigned int apic_id = x86_cpu_apic_id_from_index(i);
- assert(apic_id < pcms->apic_id_limit);
- for (j = 0; j < nb_numa_nodes; j++) {
- if (test_bit(i, numa_info[j].node_cpu)) {
- pcms->node_cpu[apic_id] = j;
- break;
- }
- }
- }
-
pcms->machine_done.notify = pc_machine_done;
qemu_add_machine_init_done_notifier(&pcms->machine_done);
}
--
MST
next prev parent reply other threads:[~2016-06-24 5:55 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1466747621-4342-1-git-send-email-mst@redhat.com>
2016-06-24 5:54 ` [Qemu-devel] [PULL 01/34] smbios: Move table build tools into an include file Michael S. Tsirkin
2016-06-24 5:54 ` [Qemu-devel] [PULL 02/34] ipmi: Add SMBIOS table entry Michael S. Tsirkin
2016-06-24 5:54 ` [Qemu-devel] [PULL 03/34] acpi: Add IPMI table entries Michael S. Tsirkin
2016-06-24 5:54 ` [Qemu-devel] [PULL 04/34] bios: Add tests for the IPMI ACPI and SMBIOS entries Michael S. Tsirkin
2016-06-24 5:54 ` [Qemu-devel] [PULL 05/34] pc-dimm: introduce get_vmstate_memory_region callback Michael S. Tsirkin
2016-06-24 5:54 ` [Qemu-devel] [PULL 06/34] nvdimm: support nvdimm label Michael S. Tsirkin
2016-06-24 5:54 ` [Qemu-devel] [PULL 07/34] acpi: add aml_object_type Michael S. Tsirkin
2016-06-24 5:54 ` [Qemu-devel] [PULL 08/34] acpi: add aml_call5 Michael S. Tsirkin
2016-06-24 5:54 ` [Qemu-devel] [PULL 09/34] nvdimm acpi: set HDLE properly Michael S. Tsirkin
2016-06-24 5:54 ` [Qemu-devel] [PULL 10/34] nvdimm acpi: save arg3 of _DSM method Michael S. Tsirkin
2016-06-24 5:54 ` [Qemu-devel] [PULL 11/34] nvdimm acpi: check UUID Michael S. Tsirkin
2016-06-24 5:54 ` [Qemu-devel] [PULL 12/34] nvdimm acpi: abstract the operations for root & nvdimm devices Michael S. Tsirkin
2016-06-24 5:54 ` [Qemu-devel] [PULL 13/34] nvdimm acpi: check revision Michael S. Tsirkin
2016-06-24 5:54 ` [Qemu-devel] [PULL 14/34] nvdimm acpi: support Get Namespace Label Size function Michael S. Tsirkin
2016-06-24 5:54 ` [Qemu-devel] [PULL 15/34] nvdimm acpi: support Get Namespace Label Data function Michael S. Tsirkin
2016-06-24 5:54 ` [Qemu-devel] [PULL 16/34] nvdimm acpi: support Set " Michael S. Tsirkin
2016-06-24 5:55 ` [Qemu-devel] [PULL 17/34] docs: add NVDIMM ACPI documentation Michael S. Tsirkin
2016-06-24 5:55 ` [Qemu-devel] [PULL 18/34] i386: pci-assign: Fix MSI-X table size Michael S. Tsirkin
2016-06-24 5:55 ` [Qemu-devel] [PULL 19/34] docs: update ACPI CPU hotplug spec with new protocol Michael S. Tsirkin
2016-06-24 5:55 ` [Qemu-devel] [PULL 20/34] pc: piix4/ich9: add 'cpu-hotplug-legacy' property Michael S. Tsirkin
2016-06-24 5:55 ` [Qemu-devel] [PULL 21/34] acpi: cpuhp: add CPU devices AML with _STA method Michael S. Tsirkin
2016-06-24 5:55 ` [Qemu-devel] [PULL 22/34] pc: acpi: introduce AcpiDeviceIfClass.madt_cpu hook Michael S. Tsirkin
2016-06-24 5:55 ` [Qemu-devel] [PULL 23/34] acpi: cpuhp: implement hot-add parts of CPU hotplug interface Michael S. Tsirkin
2016-06-24 5:55 ` [Qemu-devel] [PULL 24/34] acpi: cpuhp: implement hot-remove " Michael S. Tsirkin
2016-06-24 5:55 ` [Qemu-devel] [PULL 25/34] acpi: cpuhp: add cpu._OST handling Michael S. Tsirkin
2016-06-24 5:55 ` [Qemu-devel] [PULL 26/34] pc: use new CPU hotplug interface since 2.7 machine type Michael S. Tsirkin
2016-06-24 5:55 ` [Qemu-devel] [PULL 27/34] acpi-test-data: update expected Michael S. Tsirkin
2016-06-24 5:55 ` Michael S. Tsirkin [this message]
2016-06-24 5:55 ` [Qemu-devel] [PULL 29/34] virtio-bus: common ioeventfd infrastructure Michael S. Tsirkin
2016-06-24 5:55 ` [Qemu-devel] [PULL 30/34] virtio-bus: have callers tolerate new host notifier api Michael S. Tsirkin
2016-06-29 11:37 ` Marc-André Lureau
2016-06-29 11:48 ` Cornelia Huck
2016-06-24 5:55 ` [Qemu-devel] [PULL 31/34] virtio-ccw: convert to ioeventfd callbacks Michael S. Tsirkin
2016-06-24 5:55 ` [Qemu-devel] [PULL 32/34] virtio-pci: " Michael S. Tsirkin
2016-06-24 5:56 ` [Qemu-devel] [PULL 33/34] virtio-mmio: " Michael S. Tsirkin
2016-06-24 5:56 ` [Qemu-devel] [PULL 34/34] virtio-bus: remove old set_host_notifier callback Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160624085542-mutt-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=ehabkost@redhat.com \
--cc=imammedo@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).