From: David Gibson <david@gibson.dropbear.id.au>
To: "Cédric Le Goater" <clg@kaod.org>
Cc: Alexander Graf <agraf@suse.de>,
qemu-devel@nongnu.org, qemu-ppc@nongnu.org
Subject: Re: [Qemu-devel] [PATCH 2/3] hw/ppc: use error_report instead of fprintf
Date: Tue, 26 Jul 2016 15:58:36 +1000 [thread overview]
Message-ID: <20160726055836.GK17429@voom.fritz.box> (raw)
In-Reply-To: <1469456683-25891-3-git-send-email-clg@kaod.org>
[-- Attachment #1: Type: text/plain, Size: 9013 bytes --]
On Mon, Jul 25, 2016 at 04:24:42PM +0200, Cédric Le Goater wrote:
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
So, when I did some previous conversions to error_report(), I left out
the DT code, in the hopes I'd obsolete it with a more thorough
cleanup. Since that won't happen for a while yet, I'm happy enough to
queue this for 2.8.
However, if you're going to change all these instances, you should
probably change the one in _FDT as well.
> ---
> hw/ppc/spapr.c | 12 ++++++------
> hw/ppc/spapr_drc.c | 8 ++++----
> hw/ppc/spapr_iommu.c | 4 ++--
> hw/ppc/spapr_rtas.c | 13 +++++++------
> hw/ppc/spapr_vio.c | 3 ++-
> 5 files changed, 21 insertions(+), 19 deletions(-)
>
> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
> index 538ff5a46768..4d073ce39e87 100644
> --- a/hw/ppc/spapr.c
> +++ b/hw/ppc/spapr.c
> @@ -647,13 +647,13 @@ static void spapr_populate_cpu_dt(CPUState *cs, void *fdt, int offset,
> _FDT((fdt_setprop_cell(fdt, offset, "d-cache-size",
> pcc->l1_dcache_size)));
> } else {
> - fprintf(stderr, "Warning: Unknown L1 dcache size for cpu\n");
> + error_report("Warning: Unknown L1 dcache size for cpu");
> }
> if (pcc->l1_icache_size) {
> _FDT((fdt_setprop_cell(fdt, offset, "i-cache-size",
> pcc->l1_icache_size)));
> } else {
> - fprintf(stderr, "Warning: Unknown L1 icache size for cpu\n");
> + error_report("Warning: Unknown L1 icache size for cpu");
> }
>
> _FDT((fdt_setprop_cell(fdt, offset, "timebase-frequency", tbfreq)));
> @@ -944,20 +944,20 @@ static void spapr_finalize_fdt(sPAPRMachineState *spapr,
>
> ret = spapr_populate_memory(spapr, fdt);
> if (ret < 0) {
> - fprintf(stderr, "couldn't setup memory nodes in fdt\n");
> + error_report("couldn't setup memory nodes in fdt");
> exit(1);
> }
>
> ret = spapr_populate_vdevice(spapr->vio_bus, fdt);
> if (ret < 0) {
> - fprintf(stderr, "couldn't setup vio devices in fdt\n");
> + error_report("couldn't setup vio devices in fdt");
> exit(1);
> }
>
> if (object_resolve_path_type("", TYPE_SPAPR_RNG, NULL)) {
> ret = spapr_rng_populate_dt(fdt);
> if (ret < 0) {
> - fprintf(stderr, "could not set up rng device in the fdt\n");
> + error_report("could not set up rng device in the fdt");
> exit(1);
> }
> }
> @@ -973,7 +973,7 @@ static void spapr_finalize_fdt(sPAPRMachineState *spapr,
> /* RTAS */
> ret = spapr_rtas_device_tree_setup(fdt, rtas_addr, rtas_size);
> if (ret < 0) {
> - fprintf(stderr, "Couldn't set up RTAS device tree properties\n");
> + error_report("Couldn't set up RTAS device tree properties");
> }
>
> /* cpus */
> diff --git a/hw/ppc/spapr_drc.c b/hw/ppc/spapr_drc.c
> index 26a067951c54..4b1a943b8e4d 100644
> --- a/hw/ppc/spapr_drc.c
> +++ b/hw/ppc/spapr_drc.c
> @@ -816,7 +816,7 @@ int spapr_drc_populate_dt(void *fdt, int fdt_offset, Object *owner,
> drc_indexes->data,
> drc_indexes->len * sizeof(uint32_t));
> if (ret) {
> - fprintf(stderr, "Couldn't create ibm,drc-indexes property\n");
> + error_report("Couldn't create ibm,drc-indexes property");
> goto out;
> }
>
> @@ -824,21 +824,21 @@ int spapr_drc_populate_dt(void *fdt, int fdt_offset, Object *owner,
> drc_power_domains->data,
> drc_power_domains->len * sizeof(uint32_t));
> if (ret) {
> - fprintf(stderr, "Couldn't finalize ibm,drc-power-domains property\n");
> + error_report("Couldn't finalize ibm,drc-power-domains property");
> goto out;
> }
>
> ret = fdt_setprop(fdt, fdt_offset, "ibm,drc-names",
> drc_names->str, drc_names->len);
> if (ret) {
> - fprintf(stderr, "Couldn't finalize ibm,drc-names property\n");
> + error_report("Couldn't finalize ibm,drc-names property");
> goto out;
> }
>
> ret = fdt_setprop(fdt, fdt_offset, "ibm,drc-types",
> drc_types->str, drc_types->len);
> if (ret) {
> - fprintf(stderr, "Couldn't finalize ibm,drc-types property\n");
> + error_report("Couldn't finalize ibm,drc-types property");
> goto out;
> }
>
> diff --git a/hw/ppc/spapr_iommu.c b/hw/ppc/spapr_iommu.c
> index d57b05d5c0f1..53c2cd4fb657 100644
> --- a/hw/ppc/spapr_iommu.c
> +++ b/hw/ppc/spapr_iommu.c
> @@ -310,8 +310,8 @@ sPAPRTCETable *spapr_tce_new_table(DeviceState *owner, uint32_t liobn)
> char tmp[32];
>
> if (spapr_tce_find_by_liobn(liobn)) {
> - fprintf(stderr, "Attempted to create TCE table with duplicate"
> - " LIOBN 0x%x\n", liobn);
> + error_report("Attempted to create TCE table with duplicate"
> + " LIOBN 0x%x", liobn);
> return NULL;
> }
>
> diff --git a/hw/ppc/spapr_rtas.c b/hw/ppc/spapr_rtas.c
> index dc058e512b86..27b5ad4bc437 100644
> --- a/hw/ppc/spapr_rtas.c
> +++ b/hw/ppc/spapr_rtas.c
> @@ -27,6 +27,7 @@
> #include "qemu/osdep.h"
> #include "cpu.h"
> #include "qemu/log.h"
> +#include "qemu/error-report.h"
> #include "sysemu/sysemu.h"
> #include "sysemu/char.h"
> #include "hw/qdev.h"
> @@ -716,7 +717,7 @@ int spapr_rtas_device_tree_setup(void *fdt, hwaddr rtas_addr,
>
> ret = fdt_add_mem_rsv(fdt, rtas_addr, rtas_size);
> if (ret < 0) {
> - fprintf(stderr, "Couldn't add RTAS reserve entry: %s\n",
> + error_report("Couldn't add RTAS reserve entry: %s",
> fdt_strerror(ret));
> return ret;
> }
> @@ -724,7 +725,7 @@ int spapr_rtas_device_tree_setup(void *fdt, hwaddr rtas_addr,
> ret = qemu_fdt_setprop_cell(fdt, "/rtas", "linux,rtas-base",
> rtas_addr);
> if (ret < 0) {
> - fprintf(stderr, "Couldn't add linux,rtas-base property: %s\n",
> + error_report("Couldn't add linux,rtas-base property: %s",
> fdt_strerror(ret));
> return ret;
> }
> @@ -732,7 +733,7 @@ int spapr_rtas_device_tree_setup(void *fdt, hwaddr rtas_addr,
> ret = qemu_fdt_setprop_cell(fdt, "/rtas", "linux,rtas-entry",
> rtas_addr);
> if (ret < 0) {
> - fprintf(stderr, "Couldn't add linux,rtas-entry property: %s\n",
> + error_report("Couldn't add linux,rtas-entry property: %s",
> fdt_strerror(ret));
> return ret;
> }
> @@ -740,7 +741,7 @@ int spapr_rtas_device_tree_setup(void *fdt, hwaddr rtas_addr,
> ret = qemu_fdt_setprop_cell(fdt, "/rtas", "rtas-size",
> rtas_size);
> if (ret < 0) {
> - fprintf(stderr, "Couldn't add rtas-size property: %s\n",
> + error_report("Couldn't add rtas-size property: %s",
> fdt_strerror(ret));
> return ret;
> }
> @@ -755,7 +756,7 @@ int spapr_rtas_device_tree_setup(void *fdt, hwaddr rtas_addr,
> ret = qemu_fdt_setprop_cell(fdt, "/rtas", call->name,
> i + RTAS_TOKEN_BASE);
> if (ret < 0) {
> - fprintf(stderr, "Couldn't add rtas token for %s: %s\n",
> + error_report("Couldn't add rtas token for %s: %s",
> call->name, fdt_strerror(ret));
> return ret;
> }
> @@ -770,7 +771,7 @@ int spapr_rtas_device_tree_setup(void *fdt, hwaddr rtas_addr,
> ret = qemu_fdt_setprop(fdt, "/rtas", "ibm,lrdr-capacity", lrdr_capacity,
> sizeof(lrdr_capacity));
> if (ret < 0) {
> - fprintf(stderr, "Couldn't add ibm,lrdr-capacity rtas property\n");
> + error_report("Couldn't add ibm,lrdr-capacity rtas property");
> return ret;
> }
>
> diff --git a/hw/ppc/spapr_vio.c b/hw/ppc/spapr_vio.c
> index f93244d7c182..497028f075e3 100644
> --- a/hw/ppc/spapr_vio.c
> +++ b/hw/ppc/spapr_vio.c
> @@ -20,6 +20,7 @@
> */
>
> #include "qemu/osdep.h"
> +#include "qemu/error-report.h"
> #include "qapi/error.h"
> #include "hw/hw.h"
> #include "qemu/log.h"
> @@ -276,7 +277,7 @@ int spapr_vio_send_crq(VIOsPAPRDevice *dev, uint8_t *crq)
> uint8_t byte;
>
> if (!dev->crq.qsize) {
> - fprintf(stderr, "spapr_vio_send_creq on uninitialized queue\n");
> + error_report("spapr_vio_send_creq on uninitialized queue");
> return -1;
> }
>
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2016-07-26 6:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-25 14:24 [Qemu-devel] [PATCH 0/3] Add PowerNV skeleton Cédric Le Goater
2016-07-25 14:24 ` [Qemu-devel] [PATCH 1/3] hw/ppc: include fdt helper routine in a common file Cédric Le Goater
2016-07-26 5:57 ` David Gibson
2016-07-25 14:24 ` [Qemu-devel] [PATCH 2/3] hw/ppc: use error_report instead of fprintf Cédric Le Goater
2016-07-26 5:58 ` David Gibson [this message]
2016-07-26 6:29 ` Cédric Le Goater
2016-07-25 14:24 ` [Qemu-devel] [PATCH 3/3] ppc/pnv: Add skeletton PowerNV platform Cédric Le Goater
2016-07-26 6:23 ` David Gibson
2016-07-28 17:27 ` Cédric Le Goater
2016-07-29 3:32 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160726055836.GK17429@voom.fritz.box \
--to=david@gibson.dropbear.id.au \
--cc=agraf@suse.de \
--cc=clg@kaod.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).