From: Michael Roth <mdroth@linux.vnet.ibm.com>
To: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-devel@nongnu.org, qemu-ppc@nongnu.org,
bharata@linux.vnet.ibm.com, nfont@linux.vnet.ibm.com,
jallen@linux.vnet.ibm.com
Subject: Re: [Qemu-devel] [PATCH 09/11] spapr: Add DRC count indexed hotplug identifier type
Date: Fri, 14 Oct 2016 13:52:05 -0500 [thread overview]
Message-ID: <20161014185205.29726.69095@loki> (raw)
In-Reply-To: <20161014045937.GK28562@umbus>
Quoting David Gibson (2016-10-13 23:59:37)
> On Wed, Oct 12, 2016 at 06:13:57PM -0500, Michael Roth wrote:
> > From: Bharata B Rao <bharata@linux.vnet.ibm.com>
> >
> > Add support for DRC count indexed hotplug ID type which is primarily
> > needed for memory hot unplug. This type allows for specifying the
> > number of DRs that should be plugged/unplugged starting from a given
> > DRC index.
> >
> > Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
> > * updated rtas_event_log_v6_hp to reflect count/index field ordering
> > used in PAPR hotplug ACR
> > Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
> > ---
> > hw/ppc/spapr_events.c | 74 ++++++++++++++++++++++++++++++++++++++++----------
> > include/hw/ppc/spapr.h | 4 +++
> > 2 files changed, 63 insertions(+), 15 deletions(-)
> >
> > diff --git a/hw/ppc/spapr_events.c b/hw/ppc/spapr_events.c
> > index f8bbec6..eeca800 100644
> > --- a/hw/ppc/spapr_events.c
> > +++ b/hw/ppc/spapr_events.c
> > @@ -175,6 +175,16 @@ struct epow_log_full {
> > struct rtas_event_log_v6_epow epow;
> > } QEMU_PACKED;
> >
> > +union drc_identifier {
> > + uint32_t index;
> > + uint32_t count;
> > + struct {
> > + uint32_t count;
> > + uint32_t index;
> > + } count_indexed;
> > + char name[1];
> > +} QEMU_PACKED;
> > +
> > struct rtas_event_log_v6_hp {
> > #define RTAS_LOG_V6_SECTION_ID_HOTPLUG 0x4850 /* HP */
> > struct rtas_event_log_v6_section_header hdr;
> > @@ -191,12 +201,9 @@ struct rtas_event_log_v6_hp {
> > #define RTAS_LOG_V6_HP_ID_DRC_NAME 1
> > #define RTAS_LOG_V6_HP_ID_DRC_INDEX 2
> > #define RTAS_LOG_V6_HP_ID_DRC_COUNT 3
> > +#define RTAS_LOG_V6_HP_ID_DRC_COUNT_INDEXED 4
> > uint8_t reserved;
> > - union {
> > - uint32_t index;
> > - uint32_t count;
> > - char name[1];
> > - } drc;
> > + union drc_identifier drc_id;
> > } QEMU_PACKED;
> >
> > struct hp_log_full {
> > @@ -457,7 +464,7 @@ static void spapr_hotplug_set_signalled(uint32_t drc_index)
> >
> > static void spapr_hotplug_req_event(uint8_t hp_id, uint8_t hp_action,
> > sPAPRDRConnectorType drc_type,
> > - uint32_t drc)
> > + union drc_identifier *drc_id)
> > {
> > sPAPRMachineState *spapr = SPAPR_MACHINE(qdev_get_machine());
> > struct hp_log_full *new_hp;
> > @@ -502,7 +509,7 @@ static void spapr_hotplug_req_event(uint8_t hp_id, uint8_t hp_action,
> > case SPAPR_DR_CONNECTOR_TYPE_PCI:
> > hp->hotplug_type = RTAS_LOG_V6_HP_TYPE_PCI;
> > if (hp->hotplug_action == RTAS_LOG_V6_HP_ACTION_ADD) {
> > - spapr_hotplug_set_signalled(drc);
> > + spapr_hotplug_set_signalled(drc_id->index);
> > }
> > break;
> > case SPAPR_DR_CONNECTOR_TYPE_LMB:
> > @@ -520,9 +527,16 @@ static void spapr_hotplug_req_event(uint8_t hp_id, uint8_t hp_action,
> > }
> >
> > if (hp_id == RTAS_LOG_V6_HP_ID_DRC_COUNT) {
> > - hp->drc.count = cpu_to_be32(drc);
> > + hp->drc_id.count = cpu_to_be32(drc_id->count);
> > } else if (hp_id == RTAS_LOG_V6_HP_ID_DRC_INDEX) {
> > - hp->drc.index = cpu_to_be32(drc);
> > + hp->drc_id.index = cpu_to_be32(drc_id->index);
> > + } else if (hp_id == RTAS_LOG_V6_HP_ID_DRC_COUNT_INDEXED) {
> > + /* we should not be using count_indexed value unless the guest
> > + * supports dedicated hotplug event source
> > + */
> > + g_assert(spapr_ovec_test(spapr->ov5_cas, OV5_HP_EVT));
> > + hp->drc_id.count_indexed.count = cpu_to_be32(drc_id->count_indexed.count);
> > + hp->drc_id.count_indexed.index = cpu_to_be32(drc_id->count_indexed.index);
> > }
> >
> > rtas_event_log_queue(RTAS_LOG_TYPE_HOTPLUG, new_hp, true);
> > @@ -535,34 +549,64 @@ void spapr_hotplug_req_add_by_index(sPAPRDRConnector *drc)
> > {
> > sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
> > sPAPRDRConnectorType drc_type = drck->get_type(drc);
> > - uint32_t index = drck->get_index(drc);
> > + union drc_identifier drc_id;
> >
> > + drc_id.index = drck->get_index(drc);
> > spapr_hotplug_req_event(RTAS_LOG_V6_HP_ID_DRC_INDEX,
> > - RTAS_LOG_V6_HP_ACTION_ADD, drc_type, index);
> > + RTAS_LOG_V6_HP_ACTION_ADD, drc_type, &drc_id);
> > }
> >
> > void spapr_hotplug_req_remove_by_index(sPAPRDRConnector *drc)
> > {
> > sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
> > sPAPRDRConnectorType drc_type = drck->get_type(drc);
> > - uint32_t index = drck->get_index(drc);
> > + union drc_identifier drc_id;
> >
> > + drc_id.index = drck->get_index(drc);
> > spapr_hotplug_req_event(RTAS_LOG_V6_HP_ID_DRC_INDEX,
> > - RTAS_LOG_V6_HP_ACTION_REMOVE, drc_type, index);
> > + RTAS_LOG_V6_HP_ACTION_REMOVE, drc_type, &drc_id);
> > }
> >
> > void spapr_hotplug_req_add_by_count(sPAPRDRConnectorType drc_type,
> > uint32_t count)
> > {
> > + union drc_identifier drc_id;
> > +
> > + drc_id.count = count;
> > spapr_hotplug_req_event(RTAS_LOG_V6_HP_ID_DRC_COUNT,
> > - RTAS_LOG_V6_HP_ACTION_ADD, drc_type, count);
> > + RTAS_LOG_V6_HP_ACTION_ADD, drc_type, &drc_id);
> > }
> >
> > void spapr_hotplug_req_remove_by_count(sPAPRDRConnectorType drc_type,
> > uint32_t count)
> > {
> > + union drc_identifier drc_id;
> > +
> > + drc_id.count = count;
> > spapr_hotplug_req_event(RTAS_LOG_V6_HP_ID_DRC_COUNT,
> > - RTAS_LOG_V6_HP_ACTION_REMOVE, drc_type, count);
> > + RTAS_LOG_V6_HP_ACTION_REMOVE, drc_type, &drc_id);
> > +}
> > +
> > +void spapr_hotplug_req_add_by_count_indexed(sPAPRDRConnectorType drc_type,
> > + uint32_t count, uint32_t index)
> > +{
> > + union drc_identifier drc_id;
> > +
> > + drc_id.count_indexed.count = count;
> > + drc_id.count_indexed.index = index;
> > + spapr_hotplug_req_event(RTAS_LOG_V6_HP_ID_DRC_COUNT_INDEXED,
> > + RTAS_LOG_V6_HP_ACTION_ADD, drc_type, &drc_id);
> > +}
> > +
> > +void spapr_hotplug_req_remove_by_count_indexed(sPAPRDRConnectorType drc_type,
> > + uint32_t count, uint32_t index)
> > +{
> > + union drc_identifier drc_id;
> > +
> > + drc_id.count_indexed.count = count;
> > + drc_id.count_indexed.index = index;
> > + spapr_hotplug_req_event(RTAS_LOG_V6_HP_ID_DRC_COUNT_INDEXED,
> > + RTAS_LOG_V6_HP_ACTION_REMOVE, drc_type, &drc_id);
> > }
> >
> > static void check_exception(PowerPCCPU *cpu, sPAPRMachineState *spapr,
> > diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
> > index 2295ac6..11a2597 100644
> > --- a/include/hw/ppc/spapr.h
> > +++ b/include/hw/ppc/spapr.h
> > @@ -602,6 +602,10 @@ void spapr_hotplug_req_add_by_count(sPAPRDRConnectorType drc_type,
> > uint32_t count);
> > void spapr_hotplug_req_remove_by_count(sPAPRDRConnectorType drc_type,
> > uint32_t count);
> > +void spapr_hotplug_req_add_by_count_indexed(sPAPRDRConnectorType drc_type,
> > + uint32_t count, uint32_t index);
> > +void spapr_hotplug_req_remove_by_count_indexed(sPAPRDRConnectorType drc_type,
> > + uint32_t count, uint32_t index);
> > void spapr_cpu_init(sPAPRMachineState *spapr, PowerPCCPU *cpu, Error **errp);
> > void *spapr_populate_hotplug_cpu_dt(CPUState *cs, int *fdt_offset,
> > sPAPRMachineState *spapr);
Was this a mis-fire?
>
> --
> David Gibson | I'll have my music baroque, and my code
> david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
> | _way_ _around_!
> http://www.ozlabs.org/~dgibson
next prev parent reply other threads:[~2016-10-14 18:53 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-12 23:13 [Qemu-devel] [RFC PATCH 00/11] spapr: option vector re-work and memory unplug support Michael Roth
2016-10-12 23:13 ` [Qemu-devel] [PATCH 01/11] spapr_ovec: initial implementation of option vector helpers Michael Roth
2016-10-14 2:39 ` David Gibson
2016-10-14 17:49 ` Michael Roth
2016-10-12 23:13 ` [Qemu-devel] [PATCH 02/11] spapr_hcall: use spapr_ovec_* interfaces for CAS options Michael Roth
2016-10-14 3:02 ` David Gibson
2016-10-14 4:20 ` David Gibson
2016-10-14 7:10 ` Bharata B Rao
2016-10-12 23:13 ` [Qemu-devel] [PATCH 03/11] spapr: add option vector handling in CAS-generated resets Michael Roth
2016-10-14 4:15 ` David Gibson
2016-10-12 23:13 ` [Qemu-devel] [PATCH 04/11] spapr: improve ibm, architecture-vec-5 property handling Michael Roth
2016-10-12 23:13 ` [Qemu-devel] [PATCH 05/11] spapr: fix inheritance chain for default machine options Michael Roth
2016-10-14 4:34 ` David Gibson
2016-10-12 23:13 ` [Qemu-devel] [PATCH 06/11] spapr: update spapr hotplug documentation Michael Roth
2016-10-14 4:35 ` David Gibson
2016-10-12 23:13 ` [Qemu-devel] [PATCH 07/11] spapr: add hotplug interrupt machine options Michael Roth
2016-10-14 4:38 ` David Gibson
2016-10-14 18:08 ` Michael Roth
2016-10-14 8:37 ` Bharata B Rao
2016-10-14 18:04 ` Michael Roth
2016-10-17 2:51 ` Bharata B Rao
2016-10-12 23:13 ` [Qemu-devel] [PATCH 08/11] spapr_events: add support for dedicated hotplug event source Michael Roth
2016-10-14 4:56 ` David Gibson
2016-10-14 18:44 ` Michael Roth
2016-10-16 23:39 ` David Gibson
2016-10-14 8:46 ` Bharata B Rao
2016-10-14 18:51 ` Michael Roth
2016-10-12 23:13 ` [Qemu-devel] [PATCH 09/11] spapr: Add DRC count indexed hotplug identifier type Michael Roth
2016-10-14 4:59 ` David Gibson
2016-10-14 18:52 ` Michael Roth [this message]
2016-10-12 23:13 ` [Qemu-devel] [PATCH 10/11] spapr: use count+index for memory hotplug Michael Roth
2016-10-12 23:13 ` [Qemu-devel] [PATCH 11/11] spapr: Memory hot-unplug support Michael Roth
2016-10-14 7:05 ` Bharata B Rao
2016-10-14 4:10 ` [Qemu-devel] [RFC PATCH 00/11] spapr: option vector re-work and memory unplug support no-reply
2016-10-14 5:43 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161014185205.29726.69095@loki \
--to=mdroth@linux.vnet.ibm.com \
--cc=bharata@linux.vnet.ibm.com \
--cc=david@gibson.dropbear.id.au \
--cc=jallen@linux.vnet.ibm.com \
--cc=nfont@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).