qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Fam Zheng <famz@redhat.com>
To: Eric Blake <eblake@redhat.com>
Cc: qemu-devel@nongnu.org, qemu-block@nongnu.org,
	qemu-stable@nongnu.org, Ed Swierk <eswierk@skyportsystems.com>,
	"Denis V . Lunev" <den@openvz.org>,
	Stefan Hajnoczi <stefanha@redhat.com>,
	Kevin Wolf <kwolf@redhat.com>, Max Reitz <mreitz@redhat.com>
Subject: Re: [Qemu-devel] [PATCH for-2.8] block: Let write zeroes fallback work even with small max_transfer
Date: Wed, 9 Nov 2016 10:35:36 +0800	[thread overview]
Message-ID: <20161109023536.GB18749@lemon> (raw)
In-Reply-To: <1478645535-21236-1-git-send-email-eblake@redhat.com>

On Tue, 11/08 16:52, Eric Blake wrote:
> Commit 443668ca rewrote the write_zeroes logic to guarantee that
> an unaligned request never crosses a cluster boundary.  But
> in the rewrite, the new code assumed that at most one iteration
> would be needed to get to an alignment boundary.
> 
> However, it is easy to trigger an assertion failure: the Linux
> kernel limits loopback devices to advertise a max_transfer of
> only 64k.  Any operation that requires falling back to writes
> rather than more efficient zeroing must obey max_transfer during
> that fallback, which means an unaligned head may require multiple
> iterations of the write fallbacks before reaching the aligned
> boundaries, when layering a format with clusters larger than 64k
> atop the protocol of file access to a loopback device.
> 
> Test case:
> 
> $ qemu-img create -f qcow2 -o cluster_size=1M file 10M
> $ losetup /dev/loop2 /path/to/file
> $ qemu-io -f qcow2 /dev/loop2
> qemu-io> w 7m 1k
> qemu-io> w -z 8003584 2093056
> 
> In fairness to Denis (as the original listed author of the culprit
> commit), the faulty logic for at most one iteration is probably all
> my fault in reworking his idea.  But the solution is to restore what
> was in place prior to that commit: when dealing with an unaligned
> head or tail, iterate as many times as necessary while fragmenting
> the operation at max_transfer boundaries.
> 
> CC: qemu-stable@nongnu.org
> CC: Ed Swierk <eswierk@skyportsystems.com>
> CC: Denis V. Lunev <den@openvz.org>
> Signed-off-by: Eric Blake <eblake@redhat.com>
> ---
>  block/io.c | 13 ++++++++-----
>  1 file changed, 8 insertions(+), 5 deletions(-)
> 
> diff --git a/block/io.c b/block/io.c
> index aa532a5..085ac34 100644
> --- a/block/io.c
> +++ b/block/io.c
> @@ -1214,6 +1214,8 @@ static int coroutine_fn bdrv_co_do_pwrite_zeroes(BlockDriverState *bs,
>      int max_write_zeroes = MIN_NON_ZERO(bs->bl.max_pwrite_zeroes, INT_MAX);
>      int alignment = MAX(bs->bl.pwrite_zeroes_alignment,
>                          bs->bl.request_alignment);
> +    int max_transfer = MIN_NON_ZERO(bs->bl.max_transfer,
> +                                    MAX_WRITE_ZEROES_BOUNCE_BUFFER);
> 
>      assert(alignment % bs->bl.request_alignment == 0);
>      head = offset % alignment;
> @@ -1229,9 +1231,12 @@ static int coroutine_fn bdrv_co_do_pwrite_zeroes(BlockDriverState *bs,
>           * boundaries.
>           */
>          if (head) {
> -            /* Make a small request up to the first aligned sector.  */
> -            num = MIN(count, alignment - head);
> -            head = 0;
> +            /* Make a small request up to the first aligned sector. For
> +             * convenience, limit this request to max_transfer even if
> +             * we don't need to fall back to writes.  */
> +            num = MIN(MIN(count, max_transfer), alignment - head);
> +            head = (head + num) % alignment;
> +            assert(num < max_write_zeroes);
>          } else if (tail && num > alignment) {
>              /* Shorten the request to the last aligned sector.  */
>              num -= tail;
> @@ -1257,8 +1262,6 @@ static int coroutine_fn bdrv_co_do_pwrite_zeroes(BlockDriverState *bs,
> 
>          if (ret == -ENOTSUP) {
>              /* Fall back to bounce buffer if write zeroes is unsupported */
> -            int max_transfer = MIN_NON_ZERO(bs->bl.max_transfer,
> -                                            MAX_WRITE_ZEROES_BOUNCE_BUFFER);
>              BdrvRequestFlags write_flags = flags & ~BDRV_REQ_ZERO_WRITE;
> 
>              if ((flags & BDRV_REQ_FUA) &&
> -- 
> 2.7.4
> 

Reviewed-by: Fam Zheng <famz@redhat.com>

  reply	other threads:[~2016-11-09  2:35 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-08 22:52 [Qemu-devel] [PATCH for-2.8] block: Let write zeroes fallback work even with small max_transfer Eric Blake
2016-11-09  2:35 ` Fam Zheng [this message]
2016-11-09 13:49 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2016-11-09 20:06   ` Eric Blake
2016-11-10  2:11     ` Fam Zheng
2016-11-10  8:03       ` Kevin Wolf
2016-11-14 15:50         ` Eric Blake
2016-11-15 12:57           ` Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161109023536.GB18749@lemon \
    --to=famz@redhat.com \
    --cc=den@openvz.org \
    --cc=eblake@redhat.com \
    --cc=eswierk@skyportsystems.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-stable@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).