From: Leif Lindholm <leif.lindholm@linaro.org>
To: qemu-devel@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Igor Mammedov <imammedo@redhat.com>,
"Michael S . Tsirkin" <mst@redhat.com>,
Peter Maydell <peter.maydell@linaro.org>
Subject: [Qemu-devel] [PATCH] smbios: filter based on CONFIG_SMBIOS rather than TARGET
Date: Thu, 22 Dec 2016 15:18:28 +0000 [thread overview]
Message-ID: <20161222151828.28292-1-leif.lindholm@linaro.org> (raw)
-smbios command line options were accepted but silently ignored on
TARGET_ARM, due to a test for TARGET_I386 in arch_init.c.
Copy the mechanism of hw/pci/pci-stub.c to implement an smbios-stub
instead, enabled for all targets without CONFIG_SMBIOS.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
---
Not sure if Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
is semantically correct in this instance, but if it is, please
add it.
arch_init.c | 8 --------
hw/Makefile.objs | 2 +-
hw/smbios/Makefile.objs | 3 +++
hw/smbios/smbios-stub.c | 31 +++++++++++++++++++++++++++++++
hw/smbios/smbios.c | 2 +-
include/hw/smbios/smbios.h | 2 +-
vl.c | 2 +-
7 files changed, 38 insertions(+), 12 deletions(-)
create mode 100644 hw/smbios/smbios-stub.c
diff --git a/arch_init.c b/arch_init.c
index 5cc58b2..34e7694 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -28,7 +28,6 @@
#include "sysemu/arch_init.h"
#include "hw/pci/pci.h"
#include "hw/audio/audio.h"
-#include "hw/smbios/smbios.h"
#include "qemu/config-file.h"
#include "qemu/error-report.h"
#include "qmp-commands.h"
@@ -248,13 +247,6 @@ void do_acpitable_option(const QemuOpts *opts)
#endif
}
-void do_smbios_option(QemuOpts *opts)
-{
-#ifdef TARGET_I386
- smbios_entry_add(opts);
-#endif
-}
-
int kvm_available(void)
{
#ifdef CONFIG_KVM
diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index 0ffd281..2a73ae5 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -33,7 +33,7 @@ devices-dirs-$(CONFIG_VIRTIO) += virtio/
devices-dirs-$(CONFIG_SOFTMMU) += watchdog/
devices-dirs-$(CONFIG_SOFTMMU) += xen/
devices-dirs-$(CONFIG_MEM_HOTPLUG) += mem/
-devices-dirs-$(CONFIG_SMBIOS) += smbios/
+devices-dirs-$(CONFIG_SOFTMMU) += smbios/
devices-dirs-y += core/
common-obj-y += $(devices-dirs-y)
obj-y += $(devices-dirs-y)
diff --git a/hw/smbios/Makefile.objs b/hw/smbios/Makefile.objs
index c3d3753..ee0712b 100644
--- a/hw/smbios/Makefile.objs
+++ b/hw/smbios/Makefile.objs
@@ -1,2 +1,5 @@
common-obj-$(CONFIG_SMBIOS) += smbios.o
common-obj-$(call land,$(CONFIG_SMBIOS),$(CONFIG_IPMI)) += smbios_type_38.o
+
+common-obj-$(call lnot,$(CONFIG_SMBIOS)) += smbios-stub.o
+common-obj-$(CONFIG_ALL) += smbios-stub.o
diff --git a/hw/smbios/smbios-stub.c b/hw/smbios/smbios-stub.c
new file mode 100644
index 0000000..3087394
--- /dev/null
+++ b/hw/smbios/smbios-stub.c
@@ -0,0 +1,31 @@
+/*
+ * SMBIOS stubs for platforms that don't support SMBIOS.
+ *
+ * Copyright (c) 2010 Isaku Yamahata <yamahata at valinux co jp>
+ * VA Linux Systems Japan K.K.
+ * Copyright (c) 2016 Leif Lindholm <leif.lindholm@linaro.org>
+ * Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/qmp/qerror.h"
+#include "qmp-commands.h"
+#include "hw/smbios/smbios.h"
+
+void smbios_entry_add(QemuOpts *opts, Error **errp)
+{
+ error_setg(errp, QERR_UNSUPPORTED);
+}
diff --git a/hw/smbios/smbios.c b/hw/smbios/smbios.c
index 3a96ced..1a5437a 100644
--- a/hw/smbios/smbios.c
+++ b/hw/smbios/smbios.c
@@ -882,7 +882,7 @@ static void save_opt(const char **dest, QemuOpts *opts, const char *name)
}
}
-void smbios_entry_add(QemuOpts *opts)
+void smbios_entry_add(QemuOpts *opts, Error **errp)
{
const char *val;
diff --git a/include/hw/smbios/smbios.h b/include/hw/smbios/smbios.h
index 1cd53cc..31e8d5f 100644
--- a/include/hw/smbios/smbios.h
+++ b/include/hw/smbios/smbios.h
@@ -257,7 +257,7 @@ struct smbios_type_127 {
struct smbios_structure_header header;
} QEMU_PACKED;
-void smbios_entry_add(QemuOpts *opts);
+void smbios_entry_add(QemuOpts *opts, Error **errp);
void smbios_set_cpuid(uint32_t version, uint32_t features);
void smbios_set_defaults(const char *manufacturer, const char *product,
const char *version, bool legacy_mode,
diff --git a/vl.c b/vl.c
index d77dd86..d2a0d75 100644
--- a/vl.c
+++ b/vl.c
@@ -3711,7 +3711,7 @@ int main(int argc, char **argv, char **envp)
if (!opts) {
exit(1);
}
- do_smbios_option(opts);
+ smbios_entry_add(opts, &error_abort);
break;
case QEMU_OPTION_fwcfg:
opts = qemu_opts_parse_noisily(qemu_find_opts("fw_cfg"),
--
2.10.2
next reply other threads:[~2016-12-22 15:18 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-22 15:18 Leif Lindholm [this message]
2016-12-22 15:25 ` [Qemu-devel] [PATCH] smbios: filter based on CONFIG_SMBIOS rather than TARGET Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161222151828.28292-1-leif.lindholm@linaro.org \
--to=leif.lindholm@linaro.org \
--cc=imammedo@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).