qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 09/25] virtio-scsi: introduce virtio_scsi_acquire/release
Date: Thu, 22 Dec 2016 16:22:44 +0100	[thread overview]
Message-ID: <20161222152300.32395-10-pbonzini@redhat.com> (raw)
In-Reply-To: <20161222152300.32395-1-pbonzini@redhat.com>

These will be used more as soon as the acquire/release is pushed down to
the ioeventfd handlers.

Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/scsi/virtio-scsi.c | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

diff --git a/hw/scsi/virtio-scsi.c b/hw/scsi/virtio-scsi.c
index 10fd687..34bba35 100644
--- a/hw/scsi/virtio-scsi.c
+++ b/hw/scsi/virtio-scsi.c
@@ -420,6 +420,20 @@ static void virtio_scsi_handle_ctrl_req(VirtIOSCSI *s, VirtIOSCSIReq *req)
     }
 }
 
+static inline void virtio_scsi_acquire(VirtIOSCSI *s)
+{
+    if (s->ctx) {
+        aio_context_acquire(s->ctx);
+    }
+}
+
+static inline void virtio_scsi_release(VirtIOSCSI *s)
+{
+    if (s->ctx) {
+        aio_context_release(s->ctx);
+    }
+}
+
 void virtio_scsi_handle_ctrl_vq(VirtIOSCSI *s, VirtQueue *vq)
 {
     VirtIOSCSIReq *req;
@@ -691,10 +705,7 @@ void virtio_scsi_push_event(VirtIOSCSI *s, SCSIDevice *dev,
         return;
     }
 
-    if (s->dataplane_started) {
-        assert(s->ctx);
-        aio_context_acquire(s->ctx);
-    }
+    virtio_scsi_acquire(s);
 
     req = virtio_scsi_pop_req(s, vs->event_vq);
     if (!req) {
@@ -730,9 +741,7 @@ void virtio_scsi_push_event(VirtIOSCSI *s, SCSIDevice *dev,
     }
     virtio_scsi_complete_req(req);
 out:
-    if (s->dataplane_started) {
-        aio_context_release(s->ctx);
-    }
+    virtio_scsi_release(s);
 }
 
 void virtio_scsi_handle_event_vq(VirtIOSCSI *s, VirtQueue *vq)
@@ -778,9 +787,9 @@ static void virtio_scsi_hotplug(HotplugHandler *hotplug_dev, DeviceState *dev,
         if (blk_op_is_blocked(sd->conf.blk, BLOCK_OP_TYPE_DATAPLANE, errp)) {
             return;
         }
-        aio_context_acquire(s->ctx);
+        virtio_scsi_acquire(s);
         blk_set_aio_context(sd->conf.blk, s->ctx);
-        aio_context_release(s->ctx);
+        virtio_scsi_release(s);
 
     }
 
-- 
2.9.3

  parent reply	other threads:[~2016-12-22 15:23 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-22 15:22 [Qemu-devel] [PULL 00/25] First round of misc patches for QEMU 2.9 Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 01/25] exec: optimize remaining address_space_* cases Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 02/25] exec: introduce memory_ldst.inc.c Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 03/25] exec: introduce address_space_extend_translation Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 04/25] exec: introduce MemoryRegionCache Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 05/25] watchdog: 6300esb: add exit function Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 06/25] rules.mak: speedup save-vars load-vars Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 07/25] rules.mak: add more rules to avoid chaining Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 08/25] build-sys: remove libtool left-over Paolo Bonzini
2016-12-22 15:22 ` Paolo Bonzini [this message]
2016-12-22 15:22 ` [Qemu-devel] [PULL 10/25] qemu-timer: check active_timers outside lock/event Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 11/25] timer: fix misleading comment in timer.h Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 12/25] main-loop: update comment for qemu_mutex_lock/unlock_iothread Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 13/25] block: drop remaining legacy aio functions in comment Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 14/25] target-i386: Add Intel SHA_NI instruction support Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 15/25] pc: make smbus configurable Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 16/25] pc: make sata configurable Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 17/25] pc: make pit configurable Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 18/25] x86: Fix x86_64 'g' packet response to gdb from 32-bit mode Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 19/25] multiboot: copy the cmdline verbatim, unescape module strings Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 20/25] hw/block/pflash_cfi*.c: fix confusing assert fail message Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 21/25] scsi-disk: fix VERIFY for scsi-block Paolo Bonzini
2017-01-09 19:42   ` Peter Maydell
2017-01-10  9:36     ` Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 22/25] kvm: sync linux headers Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 23/25] kvmclock: reduce kvmclock difference on migration Paolo Bonzini
2016-12-22 15:22 ` [Qemu-devel] [PULL 24/25] target-i386: Fix eflags.TF/#DB handling of syscall/sysret insns Paolo Bonzini
2016-12-22 15:23 ` [Qemu-devel] [PULL 25/25] x86: implement la57 paging mode Paolo Bonzini
2016-12-22 15:58 ` [Qemu-devel] [PULL 00/25] First round of misc patches for QEMU 2.9 no-reply
2016-12-23 11:15 ` Peter Maydell
2016-12-23 12:12   ` Paolo Bonzini
2016-12-23 12:33     ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161222152300.32395-10-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).