From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: Juan Quintela <quintela@redhat.com>
Cc: qemu-devel@nongnu.org, amit.shah@redhat.com
Subject: Re: [Qemu-devel] [PATCH 17/17] migration: flush receive queue
Date: Fri, 3 Feb 2017 12:28:27 +0000 [thread overview]
Message-ID: <20170203122826.GI3208@work-vm> (raw)
In-Reply-To: <1485207141-1941-18-git-send-email-quintela@redhat.com>
* Juan Quintela (quintela@redhat.com) wrote:
> Each time that we sync the bitmap, it is a possiblity that we receive
> a page that is being processed by a different thread. We fix this
> problem just making sure that we wait for all receiving threads to
> finish its work before we procedeed with the next stage.
>
> We are low on page flags, so we use a combination that is not valid to
> emit that message: MULTIFD_PAGE and COMPRESSED.
>
> I tried to make a migration command for it, but it don't work because
> we sync the bitmap sometimes when we have already sent the beggining
> of the section, so I just added a new page flag.
>
> Signed-off-by: Juan Quintela <quintela@redhat.com>
Is there something that makes sure that the very last page is marked
with a flush to ensure that the read completes before we start
trying to do anything after ram_load ?
As I read this the flag gets added to the first page of the next round.
Dave
> ---
> include/migration/migration.h | 1 +
> migration/ram.c | 46 +++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 47 insertions(+)
>
> diff --git a/include/migration/migration.h b/include/migration/migration.h
> index b3e4f31..1bd6bc0 100644
> --- a/include/migration/migration.h
> +++ b/include/migration/migration.h
> @@ -259,6 +259,7 @@ void migrate_multifd_send_threads_create(void);
> void migrate_multifd_send_threads_join(void);
> void migrate_multifd_recv_threads_create(void);
> void migrate_multifd_recv_threads_join(void);
> +void qemu_savevm_send_multifd_flush(QEMUFile *f);
>
> void migrate_compress_threads_create(void);
> void migrate_compress_threads_join(void);
> diff --git a/migration/ram.c b/migration/ram.c
> index 28d099f..3baead8 100644
> --- a/migration/ram.c
> +++ b/migration/ram.c
> @@ -63,6 +63,13 @@ static uint64_t bitmap_sync_count;
> #define RAM_SAVE_FLAG_COMPRESS_PAGE 0x100
> #define RAM_SAVE_FLAG_MULTIFD_PAGE 0x200
>
> +/* We are getting low on pages flags, so we start using combinations
> + When we need to flush a page, we sent it as
> + RAM_SAVE_FLAG_MULTIFD_PAGE | RAM_SAVE_FLAG_COMPRESS_PAGE
> + We don't allow that combination
> +*/
> +
> +
> static uint8_t *ZERO_TARGET_PAGE;
>
> static inline bool is_zero_range(uint8_t *p, uint64_t size)
> @@ -391,6 +398,9 @@ void migrate_compress_threads_create(void)
>
> /* Multiple fd's */
>
> +/* Indicates if we have synced the bitmap and we need to assure that
> + target has processeed all previous pages */
> +bool multifd_needs_flush = false;
>
> typedef struct {
> int num;
> @@ -752,6 +762,25 @@ static void multifd_recv_page(uint8_t *address, uint16_t fd_num)
> qemu_mutex_unlock(¶ms->mutex);
> }
>
> +
> +static int multifd_flush(void)
> +{
> + int i, thread_count;
> +
> + if (!migrate_use_multifd()) {
> + return 0;
> + }
> + thread_count = migrate_multifd_threads();
> + qemu_mutex_lock(&multifd_recv_mutex);
> + for (i = 0; i < thread_count; i++) {
> + while(!multifd_recv[i].done) {
> + qemu_cond_wait(&multifd_recv_cond, &multifd_recv_mutex);
> + }
> + }
> + qemu_mutex_unlock(&multifd_recv_mutex);
> + return 0;
> +}
> +
> /**
> * save_page_header: Write page header to wire
> *
> @@ -768,6 +797,12 @@ static size_t save_page_header(QEMUFile *f, RAMBlock *block, ram_addr_t offset)
> {
> size_t size, len;
>
> + if (multifd_needs_flush &&
> + (offset & RAM_SAVE_FLAG_MULTIFD_PAGE)) {
> + offset |= RAM_SAVE_FLAG_COMPRESS;
> + multifd_needs_flush = false;
> + }
> +
> qemu_put_be64(f, offset);
> size = 8;
>
> @@ -2450,6 +2485,9 @@ static int ram_save_complete(QEMUFile *f, void *opaque)
>
> if (!migration_in_postcopy(migrate_get_current())) {
> migration_bitmap_sync();
> + if (migrate_use_multifd()) {
> + multifd_needs_flush = true;
> + }
> }
>
> ram_control_before_iterate(f, RAM_CONTROL_FINISH);
> @@ -2491,6 +2529,9 @@ static void ram_save_pending(QEMUFile *f, void *opaque, uint64_t max_size,
> qemu_mutex_lock_iothread();
> rcu_read_lock();
> migration_bitmap_sync();
> + if (migrate_use_multifd()) {
> + multifd_needs_flush = true;
> + }
> rcu_read_unlock();
> qemu_mutex_unlock_iothread();
> remaining_size = ram_save_remaining() * TARGET_PAGE_SIZE;
> @@ -2930,6 +2971,11 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
> break;
> }
>
> + if ((flags & (RAM_SAVE_FLAG_MULTIFD_PAGE|RAM_SAVE_FLAG_COMPRESS))
> + == (RAM_SAVE_FLAG_MULTIFD_PAGE|RAM_SAVE_FLAG_COMPRESS)) {
> + multifd_flush();
> + flags = flags & ~RAM_SAVE_FLAG_COMPRESS;
> + }
> if (flags & (RAM_SAVE_FLAG_COMPRESS | RAM_SAVE_FLAG_PAGE |
> RAM_SAVE_FLAG_COMPRESS_PAGE | RAM_SAVE_FLAG_XBZRLE |
> RAM_SAVE_FLAG_MULTIFD_PAGE)) {
> --
> 2.9.3
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
next prev parent reply other threads:[~2017-02-03 12:28 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-23 21:32 [Qemu-devel] [PATCH 00/17] multifd v3 Juan Quintela
2017-01-23 21:32 ` [Qemu-devel] [PATCH 01/17] migration: transform remained DPRINTF into trace_ Juan Quintela
2017-01-24 2:20 ` Eric Blake
2017-01-24 12:20 ` Dr. David Alan Gilbert
2017-01-23 21:32 ` [Qemu-devel] [PATCH 02/17] migration: create Migration Incoming State at init time Juan Quintela
2017-01-23 21:32 ` [Qemu-devel] [PATCH 03/17] migration: Test for disabled features on reception Juan Quintela
2017-01-24 10:33 ` Dr. David Alan Gilbert
2017-02-09 17:12 ` Juan Quintela
2017-01-23 21:32 ` [Qemu-devel] [PATCH 04/17] migration: Don't create decompression threads if not enabled Juan Quintela
2017-01-23 21:32 ` [Qemu-devel] [PATCH 05/17] migration: Add multifd capability Juan Quintela
2017-01-23 21:32 ` [Qemu-devel] [PATCH 06/17] migration: Create x-multifd-threads parameter Juan Quintela
2017-02-02 15:06 ` Eric Blake
2017-02-09 17:28 ` Juan Quintela
2017-01-23 21:32 ` [Qemu-devel] [PATCH 07/17] migration: Create x-multifd-group parameter Juan Quintela
2017-01-26 11:47 ` Dr. David Alan Gilbert
2017-01-23 21:32 ` [Qemu-devel] [PATCH 08/17] migration: create multifd migration threads Juan Quintela
2017-01-23 21:32 ` [Qemu-devel] [PATCH 09/17] migration: Start of multiple fd work Juan Quintela
2017-01-27 17:45 ` Dr. David Alan Gilbert
2017-02-13 16:34 ` Juan Quintela
2017-02-13 16:39 ` Dr. David Alan Gilbert
2017-02-13 17:35 ` Daniel P. Berrange
2017-02-15 14:46 ` Dr. David Alan Gilbert
2017-02-15 15:01 ` Daniel P. Berrange
2017-01-23 21:32 ` [Qemu-devel] [PATCH 10/17] migration: create ram_multifd_page Juan Quintela
2017-01-27 18:02 ` Dr. David Alan Gilbert
2017-01-30 10:06 ` Juan Quintela
2017-02-02 11:04 ` Dr. David Alan Gilbert
2017-02-13 16:36 ` Juan Quintela
2017-02-14 11:26 ` Dr. David Alan Gilbert
2017-02-02 11:20 ` Dr. David Alan Gilbert
2017-01-23 21:32 ` [Qemu-devel] [PATCH 11/17] migration: Create thread infrastructure for multifd send side Juan Quintela
2017-01-26 12:38 ` Paolo Bonzini
2017-02-13 16:38 ` Juan Quintela
2017-02-02 12:03 ` Dr. David Alan Gilbert
2017-02-13 16:40 ` Juan Quintela
2017-02-14 11:58 ` Dr. David Alan Gilbert
2017-01-23 21:32 ` [Qemu-devel] [PATCH 12/17] migration: really use multiple pages at a time Juan Quintela
2017-02-03 10:54 ` Dr. David Alan Gilbert
2017-02-13 16:47 ` Juan Quintela
2017-01-23 21:32 ` [Qemu-devel] [PATCH 13/17] migration: Send the fd number which we are going to use for this page Juan Quintela
2017-02-03 10:59 ` Dr. David Alan Gilbert
2017-01-23 21:32 ` [Qemu-devel] [PATCH 14/17] migration: Create thread infrastructure for multifd recv side Juan Quintela
2017-01-26 12:39 ` Paolo Bonzini
2017-02-03 11:24 ` Dr. David Alan Gilbert
2017-02-13 16:56 ` Juan Quintela
2017-02-14 11:34 ` Dr. David Alan Gilbert
2017-01-23 21:32 ` [Qemu-devel] [PATCH 15/17] migration: Test new fd infrastructure Juan Quintela
2017-02-03 11:36 ` Dr. David Alan Gilbert
2017-02-13 16:57 ` Juan Quintela
2017-02-14 11:05 ` Dr. David Alan Gilbert
2017-02-14 11:15 ` Daniel P. Berrange
2017-01-23 21:32 ` [Qemu-devel] [PATCH 16/17] migration: [HACK]Transfer pages over new channels Juan Quintela
2017-02-03 11:41 ` Dr. David Alan Gilbert
2017-01-23 21:32 ` [Qemu-devel] [PATCH 17/17] migration: flush receive queue Juan Quintela
2017-02-03 12:28 ` Dr. David Alan Gilbert [this message]
2017-02-13 17:13 ` Juan Quintela
2017-01-23 22:12 ` [Qemu-devel] [PATCH 00/17] multifd v3 no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170203122826.GI3208@work-vm \
--to=dgilbert@redhat.com \
--cc=amit.shah@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).