From: "Alex Bennée" <alex.bennee@linaro.org>
To: rth@twiddle.net, peter.maydell@linaro.org
Cc: qemu-devel@nongnu.org, mttcg@listserver.greensocs.com,
fred.konrad@greensocs.com, a.rigo@virtualopensystems.com,
cota@braap.org, bobby.prani@gmail.com, nikunj@linux.vnet.ibm.com,
mark.burton@greensocs.com, pbonzini@redhat.com,
jan.kiszka@siemens.com, serge.fdrv@gmail.com,
bamvor.zhangjian@linaro.org,
"Alex Bennée" <alex.bennee@linaro.org>
Subject: [Qemu-devel] [PATCH v14 00/24] MTTCG Base enabling patches with ARM enablement
Date: Thu, 23 Feb 2017 18:29:03 +0000 [thread overview]
Message-ID: <20170223182927.7166-1-alex.bennee@linaro.org> (raw)
Hi Richard/Peter,
Well obviously it was expecting a bit much for v13 to pass with flying
colours. A merge failure which didn't affect ARM caused the
regressions on other platforms resulting in the iothread not being
released during cpu_handle_interrupt. This fix has been merged into
Jan's drop global lock patch. I also fixed a whitespace issue on the
error_report/printf for the memory order check.
The rest of this message is as with the v13 post:
I'm hoping this is the final version and we are ready to submit a
pull-request to merge MTTCG upstream. Apart from the final set of
architecture reviewed-by's the following patches have had minor
tweaks:
tcg: handle EXCP_ATOMIC exception for system emulation
Fixed to handle yet another corner case of tb-flush being triggered
during an EXCP_ATOMIC exceptions. Also the mmap_lock is now correctly
taken (as EXCP_ATOMIC can be taken for linux-user).
tcg: remove global exit_request
In the single threaded round robin we also check for
cpu->queued_work_first and bail the loop if needed. Otherwise we run
into strangeness when the "target-arm: ensure all cross vCPUs TLB
flushes complete" runs in single-threaded mode. The tail end of the
commit message has been tweaked to explain this.
tcg: enable thread-per-vCPU
Pranith found a regression running linux-user tests/atomic_bench
which was due to the fact we previously removed a setting of
cpu->exit_request to 0 in cpu_handle_interrupt. Because the
linux-user loop doesn't have the outer loop of system emulation this
caused it to hang - always exiting the TB. There was a knock on
effect w.r.t to safe work for single-threaded execution but this was
fixed in commit above.
So if you are happy are you going to be able to submit the pull
request before the soft-freeze kicks in?
Regards,
Alex.
Alex Bennée (18):
docs: new design document multi-thread-tcg.txt
tcg: move TCG_MO/BAR types into own file
tcg: add kick timer for single-threaded vCPU emulation
tcg: rename tcg_current_cpu to tcg_current_rr_cpu
tcg: remove global exit_request
tcg: enable tb_lock() for SoftMMU
tcg: enable thread-per-vCPU
cputlb: add assert_cpu_is_self checks
cputlb: tweak qemu_ram_addr_from_host_nofail reporting
cputlb and arm/sparc targets: convert mmuidx flushes from varg to
bitmap
cputlb: add tlb_flush_by_mmuidx async routines
cputlb: atomically update tlb fields used by tlb_reset_dirty
cputlb: introduce tlb_flush_*_all_cpus[_synced]
target-arm/powerctl: defer cpu reset work to CPU context
target-arm: don't generate WFE/YIELD calls for MTTCG
target-arm: ensure all cross vCPUs TLB flushes complete
hw/misc/imx6_src: defer clearing of SRC_SCR reset bits
tcg: enable MTTCG by default for ARM on x86 hosts
Jan Kiszka (1):
tcg: drop global lock during TCG code execution
KONRAD Frederic (2):
tcg: add options for enabling MTTCG
cputlb: introduce tlb_flush_* async work.
Pranith Kumar (3):
mttcg: translate-all: Enable locking debug in a debug build
mttcg: Add missing tb_lock/unlock() in cpu_exec_step()
tcg: handle EXCP_ATOMIC exception for system emulation
configure | 6 +
cpu-exec-common.c | 3 -
cpu-exec.c | 89 ++++++---
cpus.c | 345 ++++++++++++++++++++++++++-------
cputlb.c | 463 +++++++++++++++++++++++++++++++++++++--------
docs/multi-thread-tcg.txt | 350 ++++++++++++++++++++++++++++++++++
exec.c | 12 +-
hw/core/irq.c | 1 +
hw/i386/kvmvapic.c | 4 +-
hw/intc/arm_gicv3_cpuif.c | 3 +
hw/misc/imx6_src.c | 58 +++++-
hw/ppc/ppc.c | 16 +-
hw/ppc/spapr.c | 3 +
include/exec/cputlb.h | 2 -
include/exec/exec-all.h | 132 +++++++++++--
include/qom/cpu.h | 16 ++
include/sysemu/cpus.h | 2 +
memory.c | 2 +
qemu-options.hx | 20 ++
qom/cpu.c | 10 +
target/arm/arm-powerctl.c | 202 +++++++++++++-------
target/arm/arm-powerctl.h | 2 +
target/arm/cpu.c | 4 +-
target/arm/cpu.h | 18 +-
target/arm/helper.c | 219 ++++++++++-----------
target/arm/kvm.c | 7 +-
target/arm/machine.c | 41 +++-
target/arm/op_helper.c | 50 ++++-
target/arm/psci.c | 4 +-
target/arm/translate-a64.c | 8 +-
target/arm/translate.c | 20 +-
target/i386/smm_helper.c | 7 +
target/s390x/misc_helper.c | 5 +-
target/sparc/ldst_helper.c | 8 +-
tcg/i386/tcg-target.h | 11 ++
tcg/tcg-mo.h | 48 +++++
tcg/tcg.h | 27 +--
translate-all.c | 66 ++-----
translate-common.c | 21 +-
vl.c | 49 ++++-
40 files changed, 1878 insertions(+), 476 deletions(-)
create mode 100644 docs/multi-thread-tcg.txt
create mode 100644 tcg/tcg-mo.h
--
2.11.0
next reply other threads:[~2017-02-23 18:29 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-23 18:29 Alex Bennée [this message]
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 01/24] docs: new design document multi-thread-tcg.txt Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 02/24] mttcg: translate-all: Enable locking debug in a debug build Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 03/24] mttcg: Add missing tb_lock/unlock() in cpu_exec_step() Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 04/24] tcg: move TCG_MO/BAR types into own file Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 05/24] tcg: add options for enabling MTTCG Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 06/24] tcg: add kick timer for single-threaded vCPU emulation Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 07/24] tcg: rename tcg_current_cpu to tcg_current_rr_cpu Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 08/24] tcg: drop global lock during TCG code execution Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 09/24] tcg: remove global exit_request Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 10/24] tcg: enable tb_lock() for SoftMMU Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 11/24] tcg: enable thread-per-vCPU Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 12/24] tcg: handle EXCP_ATOMIC exception for system emulation Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 13/24] cputlb: add assert_cpu_is_self checks Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 14/24] cputlb: tweak qemu_ram_addr_from_host_nofail reporting Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 15/24] cputlb: introduce tlb_flush_* async work Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 16/24] cputlb and arm/sparc targets: convert mmuidx flushes from varg to bitmap Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 17/24] cputlb: add tlb_flush_by_mmuidx async routines Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 18/24] cputlb: atomically update tlb fields used by tlb_reset_dirty Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 19/24] cputlb: introduce tlb_flush_*_all_cpus[_synced] Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 20/24] target-arm/powerctl: defer cpu reset work to CPU context Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 21/24] target-arm: don't generate WFE/YIELD calls for MTTCG Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 22/24] target-arm: ensure all cross vCPUs TLB flushes complete Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 23/24] hw/misc/imx6_src: defer clearing of SRC_SCR reset bits Alex Bennée
2017-02-23 18:29 ` [Qemu-devel] [PATCH v14 24/24] tcg: enable MTTCG by default for ARM on x86 hosts Alex Bennée
2017-02-23 20:35 ` [Qemu-devel] [PATCH v14 00/24] MTTCG Base enabling patches with ARM enablement Richard Henderson
2017-02-24 7:16 ` Alex Bennée
[not found] <mailman.54661.1487925109.22739.qemu-devel@nongnu.org>
2017-02-24 14:58 ` G 3
2017-02-24 18:37 ` Alex Bennée
2017-02-26 1:46 ` Programmingkid
2017-02-26 3:03 ` Pranith Kumar
2017-03-03 0:56 ` Programmingkid
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170223182927.7166-1-alex.bennee@linaro.org \
--to=alex.bennee@linaro.org \
--cc=a.rigo@virtualopensystems.com \
--cc=bamvor.zhangjian@linaro.org \
--cc=bobby.prani@gmail.com \
--cc=cota@braap.org \
--cc=fred.konrad@greensocs.com \
--cc=jan.kiszka@siemens.com \
--cc=mark.burton@greensocs.com \
--cc=mttcg@listserver.greensocs.com \
--cc=nikunj@linux.vnet.ibm.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=serge.fdrv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).