From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Michal Privoznik <mprivozn@redhat.com>,
Jitendra Kolhe <jitendra.kolhe@hpe.com>,
Paolo Bonzini <pbonzini@redhat.com>,
qemu-devel@nongnu.org, Stefan Hajnoczi <stefanha@redhat.com>
Subject: Re: [Qemu-devel] [PATCH] os: don't corrupt pre-existing memory-backend data with prealloc
Date: Fri, 24 Feb 2017 12:12:18 +0000 [thread overview]
Message-ID: <20170224121217.GH2435@work-vm> (raw)
In-Reply-To: <20170224092416.GE3702@redhat.com>
* Daniel P. Berrange (berrange@redhat.com) wrote:
> On Fri, Feb 24, 2017 at 10:05:17AM +0100, Michal Privoznik wrote:
> > On 02/23/2017 01:07 PM, Daniel P. Berrange wrote:
> > > On Thu, Feb 23, 2017 at 01:05:33PM +0100, Michal Privoznik wrote:
> > >> On 02/23/2017 11:59 AM, Daniel P. Berrange wrote:
> > >>> When using a memory-backend object with prealloc turned on, QEMU
> > >>> will memset() the first byte in every memory page to zero. While
> > >>> this might have been acceptable for memory backends associated
> > >>> with RAM, this corrupts application data for NVDIMMs.
> > >>>
> > >>> Instead of setting every page to zero, read the current byte
> > >>> value and then just write that same value back, so we are not
> > >>> corrupting the original data.
> > >>>
> > >>> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
> > >>> ---
> > >>>
> > >>> I'm unclear if this is actually still safe in practice ? Is the
> > >>> compiler permitted to optimize away the read+write since it doesn't
> > >>> change the memory value. I'd hope not, but I've been surprised
> > >>> before...
> > >>>
> > >>> IMHO this is another factor in favour of requesting an API from
> > >>> the kernel to provide the prealloc behaviour we want.
> > >>>
> > >>> util/oslib-posix.c | 3 ++-
> > >>> 1 file changed, 2 insertions(+), 1 deletion(-)
> > >>>
> > >>> diff --git a/util/oslib-posix.c b/util/oslib-posix.c
> > >>> index 35012b9..8f5b656 100644
> > >>> --- a/util/oslib-posix.c
> > >>> +++ b/util/oslib-posix.c
> > >>> @@ -355,7 +355,8 @@ void os_mem_prealloc(int fd, char *area, size_t memory, Error **errp)
> > >>>
> > >>> /* MAP_POPULATE silently ignores failures */
> > >>> for (i = 0; i < numpages; i++) {
> > >>> - memset(area + (hpagesize * i), 0, 1);
> > >>> + char val = *(area + (hpagesize * i));
> > >>> + memset(area + (hpagesize * i), 0, val);
> > >>
> > >> I think you wanted:
> > >>
> > >> memset(area + (hpagesize * i), val, 1);
> > >>
> > >> because what you are suggesting will overwrite even more than the first
> > >> byte with zeroes.
> > >
> > > Lol, yes, I'm stupid.
> > >
> > > Anyway, rather than repost this yet, I'm interested if this is actually
> > > the right way to fix the problem or if we should do something totally
> > > different....
> >
> > So, I've done some analysis and if the optimizations are enabled, this
> > whole body is optimized away. Not the loop though. Here's what I've tested:
> >
> > #include <stdio.h>
> > #include <stdlib.h>
> > #include <string.h>
> >
> > int main(int argc, char *argv[])
> > {
> > int ret = EXIT_FAILURE;
> > unsigned char *ptr;
> > size_t i, j;
> >
> > if (!(ptr = malloc(1024 * 4))) {
> > perror("malloc");
> > goto cleanup;
> > }
> >
> > for (i = 0; i < 4; i++) {
> > unsigned char val = ptr[i*1024];
> > memset(ptr + i * 1024, val, 1);
> > }
> >
> > ret = EXIT_SUCCESS;
> > cleanup:
> > free(ptr);
> > return ret;
> > }
> >
> >
> > But if I make @val volatile, I can enforce the compiler to include the
> > body of the loop and actually read and write some bytes. BTW: if I
> > replace memset with *(ptr + i * 1024) = val; and don't make @val
> > volatile even the loop is optimized away.
>
> Ok, yeah, it makes sense that the compiler can optimize that away without
> volatile. I wonder if adding volatile has much of a performance impact on
> this loop...
I don't think we have anything else in QEMU to do it (other than atomic's
but we don't need this to be atomic). I don't think the use of memset()
helps, because the compiler is free to optimise that out as well; so
I think 'volatile' is a reasonable use (although I seem to have a soft-spot
for volatile and I know everyone else tells me I'm mad).
However, note the performance of this loop is important as shown by
Jitendra's recent patchset to parallelise it.
I wonder if MADV_WILLNEED makes any difference.
Dave
> Regards,
> Daniel
> --
> |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :|
> |: http://libvirt.org -o- http://virt-manager.org :|
> |: http://entangle-photo.org -o- http://search.cpan.org/~danberr/ :|
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
next prev parent reply other threads:[~2017-02-24 12:12 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-23 10:59 [Qemu-devel] [PATCH] os: don't corrupt pre-existing memory-backend data with prealloc Daniel P. Berrange
2017-02-23 12:05 ` Michal Privoznik
2017-02-23 12:07 ` Daniel P. Berrange
2017-02-24 9:05 ` Michal Privoznik
2017-02-24 9:24 ` Daniel P. Berrange
2017-02-24 12:12 ` Dr. David Alan Gilbert [this message]
2017-02-24 12:18 ` Paolo Bonzini
2017-02-27 11:10 ` Stefan Hajnoczi
2017-02-27 13:46 ` Rik van Riel
2017-02-27 13:58 ` Daniel P. Berrange
-- strict thread matches above, loose matches on Subject: below --
2017-02-24 17:27 Daniel P. Berrange
2017-02-24 17:33 ` no-reply
2017-02-27 9:25 ` Daniel P. Berrange
2017-02-24 19:04 ` Eric Blake
2017-02-27 13:28 ` Stefan Hajnoczi
2017-02-27 15:53 ` Andrea Arcangeli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170224121217.GH2435@work-vm \
--to=dgilbert@redhat.com \
--cc=berrange@redhat.com \
--cc=jitendra.kolhe@hpe.com \
--cc=mprivozn@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).