From: Eric Bischoff <ebischoff@suse.com>
To: Richard Henderson <rth@twiddle.net>, Alexander Graf <agraf@suse.de>
Cc: Michal Marek <mmarek@suse.cz>, Miroslav Benes <mbenes@suse.cz>,
QEmu developers <qemu-devel@nongnu.org>,
Eric Bischoff <ebischoff@nerim.net>
Subject: [Qemu-devel] [PATCH] Adding support for LPD and LPDG instructions
Date: Tue, 28 Feb 2017 12:35:35 +0100 [thread overview]
Message-ID: <20170228113535.7099-2-ebischoff@suse.com> (raw)
In-Reply-To: <20170228113535.7099-1-ebischoff@suse.com>
From: Eric Bischoff <ebischoff@nerim.net>
LPD = LOAD PAIR DISJOINT
Third patch
---
target/s390x/insn-data.def | 4 ++-
target/s390x/translate.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 66 insertions(+), 1 deletion(-)
diff --git a/target/s390x/insn-data.def b/target/s390x/insn-data.def
index 075ff59..72d1017 100644
--- a/target/s390x/insn-data.def
+++ b/target/s390x/insn-data.def
@@ -504,7 +504,9 @@
C(0xb9e2, LOCGR, RRF_c, LOC, r1, r2, r1, 0, loc, 0)
C(0xebf2, LOC, RSY_b, LOC, r1, m2_32u, new, r1_32, loc, 0)
C(0xebe2, LOCG, RSY_b, LOC, r1, m2_64, r1, 0, loc, 0)
-/* LOAD PAIR DISJOINT TODO */
+/* LOAD PAIR DISJOINT */
+ C(0xc804, LPD, SSF, ILA, 0, 0, 0, r3_P32, lpd32, 0)
+ C(0xc805, LPDG, SSF, ILA, 0, 0, 0, r3_P64, lpd64, 0)
/* LOAD POSITIVE */
C(0x1000, LPR, RR_a, Z, 0, r2_32s, new, r1_32, abs, abs32)
C(0xb900, LPGR, RRE, Z, 0, r2, r1, 0, abs, abs64)
diff --git a/target/s390x/translate.c b/target/s390x/translate.c
index 01c6217..28a53ec 100644
--- a/target/s390x/translate.c
+++ b/target/s390x/translate.c
@@ -2558,6 +2558,7 @@ static ExitStatus op_lctlg(DisasContext *s, DisasOps *o)
tcg_temp_free_i32(r3);
return NO_EXIT;
}
+
static ExitStatus op_lra(DisasContext *s, DisasOps *o)
{
check_privileged(s);
@@ -2750,6 +2751,52 @@ static ExitStatus op_lm64(DisasContext *s, DisasOps *o)
return NO_EXIT;
}
+static ExitStatus op_lpd32(DisasContext *s, DisasOps *o)
+{
+ TCGv_i64 a1, a2;
+
+ /* In a parallel context, stop the world and single step. */
+ if (parallel_cpus) {
+ potential_page_fault(s);
+ gen_helper_exit_atomic(cpu_env);
+ return EXIT_NORETURN;
+ }
+
+ /* In a serial context, perform the two loads and indicate
+ that we performed them while interlocked. */
+ a1 = get_address(s, 0, get_field(s->fields, b1), get_field(s->fields, d1));
+ a2 = get_address(s, 0, get_field(s->fields, b2), get_field(s->fields, d2));
+ o->out = tcg_temp_new_i64();
+ tcg_gen_qemu_ld32s(o->out, a1, get_mem_index(s));
+ o->out2 = tcg_temp_new_i64();
+ tcg_gen_qemu_ld32s(o->out2, a2, get_mem_index(s));
+ gen_op_movi_cc(s, 0);
+ return NO_EXIT;
+}
+
+static ExitStatus op_lpd64(DisasContext *s, DisasOps *o)
+{
+ TCGv_i64 a1, a2;
+
+ /* In a parallel context, stop the world and single step. */
+ if (parallel_cpus) {
+ potential_page_fault(s);
+ gen_helper_exit_atomic(cpu_env);
+ return EXIT_NORETURN;
+ }
+
+ /* In a serial context, perform the two loads and indicate
+ that we performed them while interlocked. */
+ a1 = get_address(s, 0, get_field(s->fields, b1), get_field(s->fields, d1));
+ a2 = get_address(s, 0, get_field(s->fields, b2), get_field(s->fields, d2));
+ o->out = tcg_temp_new_i64();
+ tcg_gen_qemu_ld64(o->out, a1, get_mem_index(s));
+ o->out2 = tcg_temp_new_i64();
+ tcg_gen_qemu_ld64(o->out2, a2, get_mem_index(s));
+ gen_op_movi_cc(s, 0);
+ return NO_EXIT;
+}
+
#ifndef CONFIG_USER_ONLY
static ExitStatus op_lura(DisasContext *s, DisasOps *o)
{
@@ -4420,6 +4467,22 @@ static void wout_r1_D32(DisasContext *s, DisasFields *f, DisasOps *o)
}
#define SPEC_wout_r1_D32 SPEC_r1_even
+static void wout_r3_P32(DisasContext *s, DisasFields *f, DisasOps *o)
+{
+ int r3 = get_field(f, r3);
+ store_reg32_i64(r3, o->out);
+ store_reg32_i64(r3 + 1, o->out2);
+}
+#define SPEC_wout_r3_P32 SPEC_r3_even
+
+static void wout_r3_P64(DisasContext *s, DisasFields *f, DisasOps *o)
+{
+ int r3 = get_field(f, r3);
+ store_reg(r3, o->out);
+ store_reg(r3 + 1, o->out2);
+}
+#define SPEC_wout_r3_P64 SPEC_r3_even
+
static void wout_e1(DisasContext *s, DisasFields *f, DisasOps *o)
{
store_freg32_i64(get_field(f, r1), o->out);
--
2.10.2
next prev parent reply other threads:[~2017-02-28 11:36 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-28 11:35 [Qemu-devel] [PATCHv3] Adding support for LPD and LPDG instructions Eric Bischoff
2017-02-28 11:35 ` Eric Bischoff [this message]
2017-02-28 11:42 ` [Qemu-devel] [PATCH] " no-reply
-- strict thread matches above, loose matches on Subject: below --
2017-02-28 12:01 Eric Bischoff
2017-02-28 17:57 ` Richard Henderson
2017-02-28 23:10 ` Richard Henderson
2017-02-27 11:22 [Qemu-devel] [PATCH v2] " Eric Bischoff
2017-02-27 11:22 ` [Qemu-devel] [PATCH] " Eric Bischoff
2017-02-27 19:10 ` Richard Henderson
2017-02-28 8:58 ` Éric Bischoff
[not found] <20170223115805.16688-1-ebischoff@suse.com>
[not found] ` <20170223115805.16688-2-ebischoff@suse.com>
[not found] ` <a26cf735-bbb6-5be7-7575-198ec55a3ecc@twiddle.net>
2017-02-26 16:10 ` Éric Bischoff
2017-02-27 10:48 ` Éric Bischoff
2017-02-24 13:19 [Qemu-devel] (no subject) Eric Bischoff
2017-02-24 13:19 ` [Qemu-devel] [PATCH] Adding support for LPD and LPDG instructions Eric Bischoff
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170228113535.7099-2-ebischoff@suse.com \
--to=ebischoff@suse.com \
--cc=agraf@suse.de \
--cc=ebischoff@nerim.net \
--cc=mbenes@suse.cz \
--cc=mmarek@suse.cz \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).