From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: Gerd Hoffmann <kraxel@redhat.com>
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] xhci migration breakage
Date: Fri, 31 Mar 2017 09:54:59 +0100 [thread overview]
Message-ID: <20170331085459.GB2408@work-vm> (raw)
In-Reply-To: <1490939133.1877.3.camel@redhat.com>
* Gerd Hoffmann (kraxel@redhat.com) wrote:
> Hi,
>
> > dest:
> > (qemu) red_dispatcher_loadvm_commands:
> > usb-storage msd post_load 0x7f45f510ee50 sig=0 tag=0
> >
> > I added these as debug on the 'usb-storage' vmsd element; but
> > the signature/tag being 0 I assume they're not the culprit.
>
> Yep, no inflight transfer, so highly unlikely (also note that ehci works
> fine according to bugzilla).
>
> > #6 0x00007febabacae27 in xhci_kick_epctx (epctx=<optimized out>, xfer=<optimized out>, xhci=<optimized out>)
> > at /root/1436616/qemu/hw/usb/hcd-xhci.c:2103 <- right at the end of xhci_submit
> > #7 0x00007febabacae27 in xhci_kick_epctx (epctx=<optimized out>, xfer=<optimized out>, xhci=<optimized out>)
> > at /root/1436616/qemu/hw/usb/hcd-xhci.c:2112 right at end of xhci_fire_transfer
> > #8 0x00007febabacae27 in xhci_kick_epctx (epctx=0x7febaec395a0, streamid=0)
> > at /root/1436616/qemu/hw/usb/hcd-xhci.c:2240
>
> Recursive xhci_kick_epctx calls, not good.
>
> Does the attached patch (not tested yet) make any difference?
Nope.
Source:
xhci_submit(slotid=1,epid=3)
xhci: setup packet pid 0x69 addr 1 ep 1
30724@1490950388.025424:usb_xhci_ep_kick slotid 1, epid 4, streamid 0
xhci: set epctx: 23fe22080 state=1 dequeue=0000000035460f41
30724@1490950388.025449:usb_xhci_xfer_start 0x7fbf642facc0: slotid 1, epid 4, streamid 0
xhci_submit(slotid=1,epid=4)
xhci: setup packet pid 0xe1 addr 1 ep 2
30724@1490950388.025649:usb_xhci_ep_kick slotid 1, epid 3, streamid 0
xhci: set epctx: 23fe22060 state=1 dequeue=000000003550e421
30724@1490950388.025674:usb_xhci_xfer_start 0x7fbf642facc0: slotid 1, epid 3, streamid 0
xhci_submit(slotid=1,epid=3)
xhci: setup packet pid 0x69 addr 1 ep 1
30724@1490950388.025790:usb_xhci_ep_kick slotid 1, epid 3, streamid 0
xhci: set epctx: 23fe22060 state=1 dequeue=000000003550e431
30724@1490950388.025807:usb_xhci_xfer_start 0x7fbf642facc0: slotid 1, epid 3, streamid 0
xhci_submit(slotid=1,epid=3)
xhci: setup packet pid 0x69 addr 1 ep 1
30724@1490950388.026700:usb_xhci_ep_kick slotid 1, epid 4, streamid 0
xhci: set epctx: 23fe22080 state=1 dequeue=0000000035460f51
30724@1490950388.026739:usb_xhci_xfer_start 0x7fbf680008f0: slotid 1, epid 4, streamid 0
xhci_submit(slotid=1,epid=4)
xhci: setup packet pid 0xe1 addr 1 ep 2
30724@1490950388.026910:usb_xhci_ep_kick slotid 1, epid 3, streamid 0
xhci: set epctx: 23fe22060 state=1 dequeue=000000003550e441
30724@1490950388.026936:usb_xhci_xfer_start 0x7fbf680008f0: slotid 1, epid 3, streamid 0
xhci_submit(slotid=1,epid=3)
xhci: setup packet pid 0x69 addr 1 ep 1
Dest:
QEMU 2.8.92 monitor - type 'help' for more information
(qemu) red_dispatcher_loadvm_commands:
usb-storage msd post_load 0x7fbcde35def0 sig=0 tag=0
main_channel_link: add main channel client
main_channel_handle_parsed: net test: latency 210.332000 ms, bitrate 1656610 bps (1.579866 Mbps) LOW BANDWIDTH
red_dispatcher_set_cursor_peer:
inputs_connect: inputs channel client create
(qemu) c
(qemu) 30736@1490950422.138659:usb_xhci_ep_kick slotid 1, epid 1, streamid 0
xhci: set epctx: 23fe22020 state=1 dequeue=0000000230c87231
30736@1490950422.138695:usb_xhci_xfer_start 0x7fbcdd8cdee0: slotid 1, epid 1, streamid 0
xhci: setup packet pid 0x69 addr 1 ep 0
30736@1490950422.138731:usb_xhci_ep_kick slotid 1, epid 3, streamid 0
xhci: set epctx: 23fe22060 state=1 dequeue=000000003550e441
30736@1490950422.138746:usb_xhci_xfer_start 0x7fbcddaf8f20: slotid 1, epid 3, streamid 0
xhci_submit(slotid=1,epid=3)
xhci: setup packet pid 0x69 addr 1 ep 1
xhci: set epctx: 23fe22060 state=2 dequeue=000000003550e441
30736@1490950422.138769:usb_xhci_ep_kick slotid 1, epid 4, streamid 0
xhci: set epctx: 23fe22080 state=1 dequeue=0000000035460f51
30736@1490950422.138781:usb_xhci_xfer_start 0x7fbcdd76aff0: slotid 1, epid 4, streamid 0
xhci_submit(slotid=1,epid=4)
xhci: setup packet pid 0xe1 addr 1 ep 2
qemu-system-x86_64: usb-msd: Bad signature 53425300
Dave
> cheers,
> Gerd
>
> From 1b10b10445ab438c3fa1107f9962add3ae0716c6 Mon Sep 17 00:00:00 2001
> From: Gerd Hoffmann <kraxel@redhat.com>
> Date: Fri, 31 Mar 2017 07:40:45 +0200
> Subject: [PATCH] xhci: set kick_active for retried xfers too
>
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
> ---
> hw/usb/hcd-xhci.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c
> index f0af852..8958f95 100644
> --- a/hw/usb/hcd-xhci.c
> +++ b/hw/usb/hcd-xhci.c
> @@ -2083,6 +2083,7 @@ static void xhci_kick_epctx(XHCIEPContext *epctx, unsigned int streamid)
> return;
> }
>
> + epctx->kick_active++;
> if (epctx->retry) {
> XHCITransfer *xfer = epctx->retry;
>
> @@ -2093,6 +2094,7 @@ static void xhci_kick_epctx(XHCIEPContext *epctx, unsigned int streamid)
> mfindex = xhci_mfindex_get(xhci);
> xhci_check_intr_iso_kick(xhci, xfer, epctx, mfindex);
> if (xfer->running_retry) {
> + epctx->kick_active--;
> return;
> }
> xfer->timed_xfer = 0;
> @@ -2101,6 +2103,7 @@ static void xhci_kick_epctx(XHCIEPContext *epctx, unsigned int streamid)
> if (xfer->iso_xfer) {
> /* retry iso transfer */
> if (xhci_setup_packet(xfer) < 0) {
> + epctx->kick_active--;
> return;
> }
> usb_handle_packet(xfer->packet.ep->dev, &xfer->packet);
> @@ -2109,10 +2112,12 @@ static void xhci_kick_epctx(XHCIEPContext *epctx, unsigned int streamid)
> } else {
> /* retry nak'ed transfer */
> if (xhci_setup_packet(xfer) < 0) {
> + epctx->kick_active--;
> return;
> }
> usb_handle_packet(xfer->packet.ep->dev, &xfer->packet);
> if (xfer->packet.status == USB_RET_NAK) {
> + epctx->kick_active--;
> return;
> }
> xhci_try_complete_packet(xfer);
> @@ -2126,6 +2131,7 @@ static void xhci_kick_epctx(XHCIEPContext *epctx, unsigned int streamid)
>
> if (epctx->state == EP_HALTED) {
> DPRINTF("xhci: ep halted, not running schedule\n");
> + epctx->kick_active--;
> return;
> }
>
> @@ -2134,6 +2140,7 @@ static void xhci_kick_epctx(XHCIEPContext *epctx, unsigned int streamid)
> uint32_t err;
> stctx = xhci_find_stream(epctx, streamid, &err);
> if (stctx == NULL) {
> + epctx->kick_active--;
> return;
> }
> ring = &stctx->ring;
> @@ -2145,7 +2152,6 @@ static void xhci_kick_epctx(XHCIEPContext *epctx, unsigned int streamid)
> }
> assert(ring->dequeue != 0);
>
> - epctx->kick_active++;
> while (1) {
> length = xhci_ring_chain_length(xhci, ring);
> if (length <= 0) {
> --
> 1.8.3.1
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
prev parent reply other threads:[~2017-03-31 8:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-30 12:23 [Qemu-devel] xhci migration breakage Dr. David Alan Gilbert
2017-03-30 14:10 ` Gerd Hoffmann
2017-03-30 17:42 ` Dr. David Alan Gilbert
2017-03-31 5:45 ` Gerd Hoffmann
2017-03-31 8:54 ` Dr. David Alan Gilbert [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170331085459.GB2408@work-vm \
--to=dgilbert@redhat.com \
--cc=kraxel@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).