From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org
Subject: [Qemu-devel] [PATCH 14/17] block: optimize access to reqs_lock
Date: Thu, 20 Apr 2017 14:00:55 +0200 [thread overview]
Message-ID: <20170420120058.28404-15-pbonzini@redhat.com> (raw)
In-Reply-To: <20170420120058.28404-1-pbonzini@redhat.com>
Hot path reqs_lock critical sections are very small; the only large critical
sections happen when a request waits for serialising requests, and these
should never happen in usual circumstances.
We do not want these small critical sections to yield in any case,
which calls for using a spinlock while writing the list. The reqs_lock
is still used to protect the individual requests' CoQueue. For this
purpose, serializing removals against concurrent walks of the request
list can use lock_unlock for efficiency and determinism.
The reqs_lock is also used to protect the flush generation counts, but
that's unrelated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
block.c | 1 +
block/io.c | 25 ++++++++++++++++++++-----
include/block/block_int.h | 11 ++++++++---
3 files changed, 29 insertions(+), 8 deletions(-)
diff --git a/block.c b/block.c
index 3b2ed29..7ba6afe 100644
--- a/block.c
+++ b/block.c
@@ -234,6 +234,7 @@ BlockDriverState *bdrv_new(void)
QLIST_INIT(&bs->op_blockers[i]);
}
notifier_with_return_list_init(&bs->before_write_notifiers);
+ qemu_spin_init(&bs->reqs_list_write_lock);
qemu_co_mutex_init(&bs->reqs_lock);
bs->refcnt = 1;
bs->aio_context = qemu_get_aio_context();
diff --git a/block/io.c b/block/io.c
index 7af9d47..476807d 100644
--- a/block/io.c
+++ b/block/io.c
@@ -374,14 +374,29 @@ void bdrv_drain_all(void)
*/
static void tracked_request_end(BdrvTrackedRequest *req)
{
+ BlockDriverState *bs = req->bs;
+
if (req->serialising) {
- atomic_dec(&req->bs->serialising_in_flight);
+ atomic_dec(&bs->serialising_in_flight);
}
- qemu_co_mutex_lock(&req->bs->reqs_lock);
+ /* Note that there can be a concurrent visit while we remove the list,
+ * so we need to...
+ */
+ qemu_spin_lock(&bs->reqs_list_write_lock);
QLIST_REMOVE(req, list);
+ qemu_spin_unlock(&bs->reqs_list_write_lock);
+
+ /* ... wait for it to end before we leave. qemu_co_mutex_lock_unlock
+ * avoids cacheline bouncing in the common case of no concurrent
+ * reader.
+ */
+ qemu_co_mutex_lock_unlock(&bs->reqs_lock);
+
+ /* Now no coroutine can add itself to the wait queue, so it is
+ * safe to call qemu_co_queue_restart_all outside the reqs_lock.
+ */
qemu_co_queue_restart_all(&req->wait_queue);
- qemu_co_mutex_unlock(&req->bs->reqs_lock);
}
/**
@@ -406,9 +421,9 @@ static void tracked_request_begin(BdrvTrackedRequest *req,
qemu_co_queue_init(&req->wait_queue);
- qemu_co_mutex_lock(&bs->reqs_lock);
+ qemu_spin_lock(&bs->reqs_list_write_lock);
QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
- qemu_co_mutex_unlock(&bs->reqs_lock);
+ qemu_spin_unlock(&bs->reqs_list_write_lock);
}
static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 42b49f5..b298de8 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -78,9 +78,10 @@ typedef struct BdrvTrackedRequest {
QLIST_ENTRY(BdrvTrackedRequest) list;
Coroutine *co; /* owner, used for deadlock detection */
- CoQueue wait_queue; /* coroutines blocked on this request */
-
struct BdrvTrackedRequest *waiting_for;
+
+ /* Protected by BlockDriverState's reqs_lock. */
+ CoQueue wait_queue; /* coroutines blocked on this request */
} BdrvTrackedRequest;
struct BlockDriver {
@@ -626,11 +627,15 @@ struct BlockDriverState {
int quiesce_counter;
unsigned int write_gen; /* Current data generation */
- /* Protected by reqs_lock. */
+ /* Writes are protected by reqs_list_write_lock. Reads take
+ * reqs_lock so that removals can easily synchronize with walks.
+ */
QLIST_HEAD(, BdrvTrackedRequest) tracked_requests;
CoQueue flush_queue; /* Serializing flush queue */
bool active_flush_req; /* Flush request in flight? */
unsigned int flushed_gen; /* Flushed write generation */
+
+ QemuSpin reqs_list_write_lock;
CoMutex reqs_lock;
};
--
2.9.3
next prev parent reply other threads:[~2017-04-20 12:02 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-20 12:00 [Qemu-devel] [PATCH for 2.10 00/17] Block layer thread safety, part 1 Paolo Bonzini
2017-04-20 12:00 ` [Qemu-devel] [PATCH 01/17] block: access copy_on_read with atomic ops Paolo Bonzini
2017-05-04 11:15 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2017-05-04 11:51 ` Paolo Bonzini
2017-04-20 12:00 ` [Qemu-devel] [PATCH 02/17] block: access quiesce_counter " Paolo Bonzini
2017-05-04 12:33 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2017-04-20 12:00 ` [Qemu-devel] [PATCH 03/17] block: access io_limits_disabled " Paolo Bonzini
2017-05-04 12:38 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2017-04-20 12:00 ` [Qemu-devel] [PATCH 04/17] block: access serialising_in_flight " Paolo Bonzini
2017-05-04 12:39 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2017-04-20 12:00 ` [Qemu-devel] [PATCH 05/17] block: access wakeup " Paolo Bonzini
2017-05-04 6:39 ` Fam Zheng
2017-05-04 7:12 ` Paolo Bonzini
2017-05-04 12:47 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2017-04-20 12:00 ` [Qemu-devel] [PATCH 06/17] block: access io_plugged " Paolo Bonzini
2017-05-04 12:48 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2017-04-20 12:00 ` [Qemu-devel] [PATCH 07/17] throttle-groups: do not use qemu_co_enter_next Paolo Bonzini
2017-05-04 13:27 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2017-04-20 12:00 ` [Qemu-devel] [PATCH 08/17] throttle-groups: protect throttled requests with a CoMutex Paolo Bonzini
2017-05-04 6:57 ` Fam Zheng
2017-05-04 13:56 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2017-04-20 12:00 ` [Qemu-devel] [PATCH 09/17] util: add stats64 module Paolo Bonzini
2017-05-04 7:19 ` Fam Zheng
2017-05-04 7:24 ` Paolo Bonzini
2017-05-04 7:36 ` Fam Zheng
2017-05-04 7:38 ` Paolo Bonzini
2017-05-04 8:55 ` [Qemu-devel] [Qemu-block] " Roman Kagan
2017-05-04 9:46 ` Paolo Bonzini
2017-04-20 12:00 ` [Qemu-devel] [PATCH 10/17] block: use Stat64 for wr_highest_offset Paolo Bonzini
2017-05-04 14:02 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2017-04-20 12:00 ` [Qemu-devel] [PATCH 11/17] block: access write_gen with atomics Paolo Bonzini
2017-05-04 14:04 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2017-04-20 12:00 ` [Qemu-devel] [PATCH 12/17] block: protect tracked_requests and flush_queue with reqs_lock Paolo Bonzini
2017-05-04 7:30 ` Fam Zheng
2017-05-04 8:35 ` Paolo Bonzini
2017-04-20 12:00 ` [Qemu-devel] [PATCH 13/17] coroutine-lock: introduce qemu_co_mutex_lock_unlock Paolo Bonzini
2017-05-04 7:39 ` Fam Zheng
2017-05-04 9:47 ` Paolo Bonzini
2017-05-04 9:52 ` Paolo Bonzini
2017-05-04 14:12 ` Stefan Hajnoczi
2017-05-04 16:17 ` Paolo Bonzini
2017-04-20 12:00 ` Paolo Bonzini [this message]
2017-05-04 14:59 ` [Qemu-devel] [Qemu-block] [PATCH 14/17] block: optimize access to reqs_lock Stefan Hajnoczi
2017-05-04 16:06 ` Paolo Bonzini
2017-05-05 10:25 ` Stefan Hajnoczi
2017-05-05 10:45 ` Paolo Bonzini
2017-05-08 16:21 ` Stefan Hajnoczi
2017-05-08 16:30 ` Paolo Bonzini
2017-04-20 12:00 ` [Qemu-devel] [PATCH 15/17] block: introduce dirty_bitmap_mutex Paolo Bonzini
2017-05-04 7:55 ` Fam Zheng
2017-05-04 9:57 ` Paolo Bonzini
2017-04-20 12:00 ` [Qemu-devel] [PATCH 16/17] block: protect modification of dirty bitmaps with a mutex Paolo Bonzini
2017-04-20 14:42 ` Eric Blake
2017-05-04 8:05 ` Fam Zheng
2017-05-04 10:05 ` Paolo Bonzini
2017-05-05 10:36 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2017-05-05 10:47 ` Paolo Bonzini
2017-05-08 16:17 ` Stefan Hajnoczi
2017-04-20 12:00 ` [Qemu-devel] [PATCH 17/17] block: make accounting thread-safe Paolo Bonzini
2017-05-05 12:56 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2017-04-20 12:40 ` [Qemu-devel] [PATCH for 2.10 00/17] Block layer thread safety, part 1 no-reply
2017-04-20 12:42 ` no-reply
2017-05-02 15:42 ` Paolo Bonzini
2017-05-04 8:09 ` Fam Zheng
2017-05-05 13:01 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170420120058.28404-15-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).