From: Juan Quintela <quintela@redhat.com>
To: qemu-devel@nongnu.org
Cc: dgilbert@redhat.com, lvivier@redhat.com, peterx@redhat.com
Subject: [Qemu-devel] [PATCH 07/26] audio: remove UINT32
Date: Wed, 26 Apr 2017 00:37:20 +0200 [thread overview]
Message-ID: <20170425223739.6703-8-quintela@redhat.com> (raw)
In-Reply-To: <20170425223739.6703-1-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
hw/audio/fmopl.c | 14 +++++++-------
hw/audio/fmopl.h | 17 ++++++++---------
2 files changed, 15 insertions(+), 16 deletions(-)
diff --git a/hw/audio/fmopl.c b/hw/audio/fmopl.c
index 3d14b45..47754e8 100644
--- a/hw/audio/fmopl.c
+++ b/hw/audio/fmopl.c
@@ -122,7 +122,7 @@ static const int slot_array[32]=
/* key scale level */
/* table is 3dB/OCT , DV converts this in TL step at 6dB/OCT */
#define DV (EG_STEP/2)
-static const UINT32 KSL_TABLE[8*16]=
+static const uint32_t KSL_TABLE[8*16]=
{
/* OCT 0 */
0.000/DV, 0.000/DV, 0.000/DV, 0.000/DV,
@@ -195,7 +195,7 @@ static INT32 ENV_CURVE[2*EG_ENT+1];
/* multiple table */
#define ML 2
-static const UINT32 MUL_TABLE[16]= {
+static const uint32_t MUL_TABLE[16]= {
/* 1/2, 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,13,14,15 */
0.50*ML, 1.00*ML, 2.00*ML, 3.00*ML, 4.00*ML, 5.00*ML, 6.00*ML, 7.00*ML,
8.00*ML, 9.00*ML,10.00*ML,10.00*ML,12.00*ML,12.00*ML,15.00*ML,15.00*ML
@@ -319,7 +319,7 @@ static inline void OPL_KEYOFF(OPL_SLOT *SLOT)
/* ---------- calcrate Envelope Generator & Phase Generator ---------- */
/* return : envelope output */
-static inline UINT32 OPL_CALC_SLOT( OPL_SLOT *SLOT )
+static inline uint32_t OPL_CALC_SLOT( OPL_SLOT *SLOT )
{
/* calcrate envelope generator */
if( (SLOT->evc+=SLOT->evs) >= SLOT->eve )
@@ -451,7 +451,7 @@ static inline void set_sl_rr(FM_OPL *OPL,int slot,int v)
/* ---------- calcrate one of channel ---------- */
static inline void OPL_CALC_CH( OPL_CH *CH )
{
- UINT32 env_out;
+ uint32_t env_out;
OPL_SLOT *SLOT;
feedback2 = 0;
@@ -496,7 +496,7 @@ static inline void OPL_CALC_CH( OPL_CH *CH )
#define WHITE_NOISE_db 6.0
static inline void OPL_CALC_RH( OPL_CH *CH )
{
- UINT32 env_tam,env_sd,env_top,env_hh;
+ uint32_t env_tam,env_sd,env_top,env_hh;
int whitenoise = (rand()&1)*(WHITE_NOISE_db/EG_STEP);
INT32 tone8;
@@ -989,8 +989,8 @@ void YM3812UpdateOne(FM_OPL *OPL, INT16 *buffer, int length)
int i;
int data;
OPLSAMPLE *buf = buffer;
- UINT32 amsCnt = OPL->amsCnt;
- UINT32 vibCnt = OPL->vibCnt;
+ uint32_t amsCnt = OPL->amsCnt;
+ uint32_t vibCnt = OPL->vibCnt;
uint8_t rhythm = OPL->rhythm&0x20;
OPL_CH *CH,*R_CH;
diff --git a/hw/audio/fmopl.h b/hw/audio/fmopl.h
index 1891a22..b52f039 100644
--- a/hw/audio/fmopl.h
+++ b/hw/audio/fmopl.h
@@ -10,7 +10,6 @@
/* compiler dependence */
#ifndef OSD_CPU_H
#define OSD_CPU_H
-typedef unsigned int UINT32; /* unsigned 32bit */
typedef signed char INT8; /* signed 8bit */
typedef signed short INT16; /* signed 16bit */
typedef signed int INT32; /* signed 32bit */
@@ -48,9 +47,9 @@ typedef struct fm_opl_slot {
INT32 *RR; /* release rate :&DR_TABLE[RR<<2] */
uint8_t ksl; /* keyscale level :(shift down bits) */
uint8_t ksr; /* key scale rate :kcode>>KSR */
- UINT32 mul; /* multiple :ML_TABLE[ML] */
- UINT32 Cnt; /* frequency count : */
- UINT32 Incr; /* frequency step : */
+ uint32_t mul; /* multiple :ML_TABLE[ML] */
+ uint32_t Cnt; /* frequency count : */
+ uint32_t Incr; /* frequency step : */
/* envelope generator state */
uint8_t eg_typ; /* envelope type flag */
uint8_t evm; /* envelope phase */
@@ -76,10 +75,10 @@ typedef struct fm_opl_channel {
INT32 *connect2; /* slot2 output pointer */
INT32 op1_out[2]; /* slot1 output for selfeedback */
/* phase generator state */
- UINT32 block_fnum; /* block+fnum : */
+ uint32_t block_fnum; /* block+fnum : */
uint8_t kcode; /* key code : KeyScaleCode */
- UINT32 fc; /* Freq. Increment base */
- UINT32 ksl_base; /* KeyScaleLevel Base step */
+ uint32_t fc; /* Freq. Increment base */
+ uint32_t ksl_base; /* KeyScaleLevel Base step */
uint8_t keyon; /* key on/off flag */
} OPL_CH;
@@ -93,7 +92,7 @@ typedef struct fm_opl_f {
uint8_t address; /* address register */
uint8_t status; /* status flag */
uint8_t statusmask; /* status mask */
- UINT32 mode; /* Reg.08 : CSM , notesel,etc. */
+ uint32_t mode; /* Reg.08 : CSM , notesel,etc. */
/* Timer */
int T[2]; /* timer counter */
uint8_t st[2]; /* timer enable */
@@ -111,7 +110,7 @@ typedef struct fm_opl_f {
/* time tables */
INT32 AR_TABLE[75]; /* atttack rate tables */
INT32 DR_TABLE[75]; /* decay rate tables */
- UINT32 FN_TABLE[1024]; /* fnumber -> increment counter */
+ uint32_t FN_TABLE[1024]; /* fnumber -> increment counter */
/* LFO */
INT32 *ams_table;
INT32 *vib_table;
--
2.9.3
next prev parent reply other threads:[~2017-04-25 22:38 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-25 22:37 [Qemu-devel] [PATCH 00/26] Audio Cleanup Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 01/26] adlib: Remove support for YMF262 Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 02/26] audio: remove Y8950 configuration Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 03/26] audio: Remove YM3526 support Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 04/26] audio: YM3812 was always defined Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 05/26] audio: Remove UINT8 Juan Quintela
2017-04-26 1:41 ` Philippe Mathieu-Daudé
2017-04-26 7:22 ` Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 06/26] audio: remove UINT16 Juan Quintela
2017-04-25 22:37 ` Juan Quintela [this message]
2017-04-25 22:37 ` [Qemu-devel] [PATCH 08/26] audio: Remove INT8 Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 09/26] audio: remove INT16 Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 10/26] audio: Remove INT32 Juan Quintela
2017-04-26 1:43 ` Philippe Mathieu-Daudé
2017-04-26 7:23 ` Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 11/26] audio: Unfold OPLSAMPLE Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 12/26] audio: Remove Unused OPL_TYPE_* Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 13/26] audio: Remove type field Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 14/26] audio: Remove unused fields Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 15/26] audio: GUSbyte is uint8_t Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 16/26] audio: remove GUSchar Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 17/26] audio: GUSword is uint16_t Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 18/26] " Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 19/26] audio: GUSsample is int16_t Juan Quintela
2017-04-26 1:47 ` Philippe Mathieu-Daudé
2017-04-25 22:37 ` [Qemu-devel] [PATCH 20/26] audio: OPLSetIRQHandler is not used anywhere Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 21/26] audio: OPLSetUpdateHandler " Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 22/26] audio: IRQHandler is not used anymore Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 23/26] audio: UpdateHandler " Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 24/26] audio: Remove unused typedefs Juan Quintela
2017-04-25 22:37 ` [Qemu-devel] [PATCH 25/26] audio: un-export OPLResetChip Juan Quintela
2017-04-26 1:48 ` Philippe Mathieu-Daudé
2017-04-25 22:37 ` [Qemu-devel] [PATCH 26/26] audio: Use ARRAY_SIZE from qemu/osdep.h Juan Quintela
2017-04-26 1:48 ` Philippe Mathieu-Daudé
2017-04-25 23:31 ` [Qemu-devel] [PATCH 00/26] Audio Cleanup no-reply
2017-04-26 7:20 ` Juan Quintela
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170425223739.6703-8-quintela@redhat.com \
--to=quintela@redhat.com \
--cc=dgilbert@redhat.com \
--cc=lvivier@redhat.com \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).