From: Greg Kurz <groug@kaod.org>
To: Pradeep Jagadeesh <pradeepkiruvale@gmail.com>
Cc: eric blake <eblake@redhat.com>,
Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>,
alberto garcia <berto@igalia.com>,
jani kokkonen <jani.kokkonen@huawei.com>,
qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v3 1/4] Throttle: Create IOThrottle structure
Date: Wed, 3 May 2017 08:22:32 +0200 [thread overview]
Message-ID: <20170503082232.1cd2ac92@bahia> (raw)
In-Reply-To: <1493735386-39622-2-git-send-email-pradeep.jagadeesh@huawei.com>
[-- Attachment #1: Type: text/plain, Size: 8538 bytes --]
s/Throttle/throttle
On Tue, 2 May 2017 10:29:43 -0400
Pradeep Jagadeesh <pradeepkiruvale@gmail.com> wrote:
> This patchset introduces a new io throttle structure. This will be
s/patchset/patch
> used in both block and fsdev devices.
>
> Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
> ---
Reviewed-by: Greg Kurz <groug@kaod.org>
> qapi/block-core.json | 76 ++--------------------------------------------
> qapi/iothrottle.json | 86 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 89 insertions(+), 73 deletions(-)
> create mode 100644 qapi/iothrottle.json
>
> diff --git a/qapi/block-core.json b/qapi/block-core.json
> index 87fb747..93d346b 100644
> --- a/qapi/block-core.json
> +++ b/qapi/block-core.json
> @@ -6,6 +6,7 @@
>
> # QAPI common definitions
> { 'include': 'common.json' }
> +{ 'include': 'iothrottle.json' }
>
> ##
> # @SnapshotInfo:
> @@ -1760,84 +1761,13 @@
> #
> # @device: Block device name (deprecated, use @id instead)
> #
> -# @id: The name or QOM path of the guest device (since: 2.8)
> -#
> -# @bps: total throughput limit in bytes per second
> -#
> -# @bps_rd: read throughput limit in bytes per second
> -#
> -# @bps_wr: write throughput limit in bytes per second
> -#
> -# @iops: total I/O operations per second
> -#
> -# @iops_rd: read I/O operations per second
> -#
> -# @iops_wr: write I/O operations per second
> -#
> -# @bps_max: total throughput limit during bursts,
> -# in bytes (Since 1.7)
> -#
> -# @bps_rd_max: read throughput limit during bursts,
> -# in bytes (Since 1.7)
> -#
> -# @bps_wr_max: write throughput limit during bursts,
> -# in bytes (Since 1.7)
> -#
> -# @iops_max: total I/O operations per second during bursts,
> -# in bytes (Since 1.7)
> -#
> -# @iops_rd_max: read I/O operations per second during bursts,
> -# in bytes (Since 1.7)
> -#
> -# @iops_wr_max: write I/O operations per second during bursts,
> -# in bytes (Since 1.7)
> -#
> -# @bps_max_length: maximum length of the @bps_max burst
> -# period, in seconds. It must only
> -# be set if @bps_max is set as well.
> -# Defaults to 1. (Since 2.6)
> -#
> -# @bps_rd_max_length: maximum length of the @bps_rd_max
> -# burst period, in seconds. It must only
> -# be set if @bps_rd_max is set as well.
> -# Defaults to 1. (Since 2.6)
> -#
> -# @bps_wr_max_length: maximum length of the @bps_wr_max
> -# burst period, in seconds. It must only
> -# be set if @bps_wr_max is set as well.
> -# Defaults to 1. (Since 2.6)
> -#
> -# @iops_max_length: maximum length of the @iops burst
> -# period, in seconds. It must only
> -# be set if @iops_max is set as well.
> -# Defaults to 1. (Since 2.6)
> -#
> -# @iops_rd_max_length: maximum length of the @iops_rd_max
> -# burst period, in seconds. It must only
> -# be set if @iops_rd_max is set as well.
> -# Defaults to 1. (Since 2.6)
> -#
> -# @iops_wr_max_length: maximum length of the @iops_wr_max
> -# burst period, in seconds. It must only
> -# be set if @iops_wr_max is set as well.
> -# Defaults to 1. (Since 2.6)
> -#
> -# @iops_size: an I/O size in bytes (Since 1.7)
> -#
> # @group: throttle group name (Since 2.4)
> #
> # Since: 1.1
> ##
> { 'struct': 'BlockIOThrottle',
> - 'data': { '*device': 'str', '*id': 'str', 'bps': 'int', 'bps_rd': 'int',
> - 'bps_wr': 'int', 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int',
> - '*bps_max': 'int', '*bps_rd_max': 'int',
> - '*bps_wr_max': 'int', '*iops_max': 'int',
> - '*iops_rd_max': 'int', '*iops_wr_max': 'int',
> - '*bps_max_length': 'int', '*bps_rd_max_length': 'int',
> - '*bps_wr_max_length': 'int', '*iops_max_length': 'int',
> - '*iops_rd_max_length': 'int', '*iops_wr_max_length': 'int',
> - '*iops_size': 'int', '*group': 'str' } }
> + 'base': 'IOThrottle',
> + 'data': { '*device': 'str', '*group': 'str' } }
>
> ##
> # @block-stream:
> diff --git a/qapi/iothrottle.json b/qapi/iothrottle.json
> new file mode 100644
> index 0000000..124ab40
> --- /dev/null
> +++ b/qapi/iothrottle.json
> @@ -0,0 +1,86 @@
> +# -*- Mode: Python -*-
> +
> +##
> +# == QAPI IOThrottle definitions
> +##
> +# @IOThrottle:
> +#
> +# A set of parameters describing iothrottle
s/iothrottle/IO throttling/
> +#
> +# @id: The name or QOM path of the guest device (since: 2.8)
> +#
> +# @bps: total throughput limit in bytes per second
> +#
> +# @bps_rd: read throughput limit in bytes per second
> +#
> +# @bps_wr: write throughput limit in bytes per second
> +#
> +# @iops: total I/O operations per second
> +#
> +# @iops_rd: read I/O operations per second
> +#
> +# @iops_wr: write I/O operations per second
> +#
> +# @bps_max: total throughput limit during bursts,
> +# in bytes (Since 1.7)
> +#
> +# @bps_rd_max: read throughput limit during bursts,
> +# in bytes (Since 1.7)
> +#
> +# @bps_wr_max: write throughput limit during bursts,
> +# in bytes (Since 1.7)
> +#
> +# @iops_max: total I/O operations per second during bursts,
> +# in bytes (Since 1.7)
> +#
> +# @iops_rd_max: read I/O operations per second during bursts,
> +# in bytes (Since 1.7)
> +#
> +# @iops_wr_max: write I/O operations per second during bursts,
> +# in bytes (Since 1.7)
> +#
> +# @bps_max_length: maximum length of the @bps_max burst
> +# period, in seconds. It must only
> +# be set if @bps_max is set as well.
> +# Defaults to 1. (Since 2.6)
> +#
> +# @bps_rd_max_length: maximum length of the @bps_rd_max
> +# burst period, in seconds. It must only
> +# be set if @bps_rd_max is set as well.
> +# Defaults to 1. (Since 2.6)
> +#
> +# @bps_wr_max_length: maximum length of the @bps_wr_max
> +# burst period, in seconds. It must only
> +# be set if @bps_wr_max is set as well.
> +# Defaults to 1. (Since 2.6)
> +#
> +# @iops_max_length: maximum length of the @iops burst
> +# period, in seconds. It must only
> +# be set if @iops_max is set as well.
> +# Defaults to 1. (Since 2.6)
> +#
> +# @iops_rd_max_length: maximum length of the @iops_rd_max
> +# burst period, in seconds. It must only
> +# be set if @iops_rd_max is set as well.
> +# Defaults to 1. (Since 2.6)
> +#
> +# @iops_wr_max_length: maximum length of the @iops_wr_max
> +# burst period, in seconds. It must only
> +# be set if @iops_wr_max is set as well.
> +# Defaults to 1. (Since 2.6)
> +#
> +# @iops_size: an I/O size in bytes (Since 1.7)
> +#
> +#
> +# Since: 2.10
> +##
> +{ 'struct': 'IOThrottle',
> + 'data': { '*id': 'str', 'bps': 'int', 'bps_rd': 'int',
> + 'bps_wr': 'int', 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int',
> + '*bps_max': 'int', '*bps_rd_max': 'int',
> + '*bps_wr_max': 'int', '*iops_max': 'int',
> + '*iops_rd_max': 'int', '*iops_wr_max': 'int',
> + '*bps_max_length': 'int', '*bps_rd_max_length': 'int',
> + '*bps_wr_max_length': 'int', '*iops_max_length': 'int',
> + '*iops_rd_max_length': 'int', '*iops_wr_max_length': 'int',
> + '*iops_size': 'int' } }
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
next prev parent reply other threads:[~2017-05-03 6:22 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-02 14:29 [Qemu-devel] [PATCH v3 0/4] fsdev: qmp interface for io throttling Pradeep Jagadeesh
2017-05-02 14:29 ` [Qemu-devel] [PATCH v3 1/4] Throttle: Create IOThrottle structure Pradeep Jagadeesh
2017-05-02 21:56 ` Eric Blake
2017-05-03 6:22 ` Greg Kurz [this message]
2017-05-03 14:19 ` Pradeep Jagadeesh
2017-05-03 17:10 ` Greg Kurz
2017-05-02 14:29 ` [Qemu-devel] [PATCH v3 2/4] fsdev: QMP interface for throttling Pradeep Jagadeesh
2017-05-02 22:13 ` Eric Blake
2017-05-03 15:40 ` Pradeep Jagadeesh
2017-05-03 16:32 ` Eric Blake
2017-05-04 15:12 ` Pradeep Jagadeesh
2017-05-04 15:19 ` Eric Blake
2017-05-05 11:09 ` Pradeep Jagadeesh
2017-05-02 14:29 ` [Qemu-devel] [PATCH v3 3/4] qmp: refactor duplicate code Pradeep Jagadeesh
2017-05-02 22:15 ` Eric Blake
2017-05-03 17:21 ` Greg Kurz
2017-05-04 9:44 ` Pradeep Jagadeesh
2017-05-02 14:29 ` [Qemu-devel] [PATCH v3 4/4] throttle: factor out " Pradeep Jagadeesh
2017-05-02 15:03 ` [Qemu-devel] [PATCH v3 0/4] fsdev: qmp interface for io throttling no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170503082232.1cd2ac92@bahia \
--to=groug@kaod.org \
--cc=berto@igalia.com \
--cc=eblake@redhat.com \
--cc=jani.kokkonen@huawei.com \
--cc=pradeep.jagadeesh@huawei.com \
--cc=pradeepkiruvale@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).