From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: Peter Xu <peterx@redhat.com>
Cc: qemu-devel@nongnu.org, Paolo Bonzini <pbonzini@redhat.com>,
Markus Armbruster <armbru@redhat.com>
Subject: Re: [Qemu-devel] [PATCH v7 1/4] ramblock: add RAMBLOCK_FOREACH()
Date: Thu, 11 May 2017 14:01:30 +0100 [thread overview]
Message-ID: <20170511130129.GF2078@work-vm> (raw)
In-Reply-To: <1494505358-15287-2-git-send-email-peterx@redhat.com>
* Peter Xu (peterx@redhat.com) wrote:
> So that it can simplifies the iterators.
>
> Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
> ---
> exec.c | 22 +++++++++++-----------
> include/exec/ramlist.h | 5 +++++
> migration/ram.c | 13 +++++++------
> 3 files changed, 23 insertions(+), 17 deletions(-)
>
> diff --git a/exec.c b/exec.c
> index eac6085..50519ae 100644
> --- a/exec.c
> +++ b/exec.c
> @@ -978,7 +978,7 @@ static RAMBlock *qemu_get_ram_block(ram_addr_t addr)
> if (block && addr - block->offset < block->max_length) {
> return block;
> }
> - QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
> + RAMBLOCK_FOREACH(block) {
> if (addr - block->offset < block->max_length) {
> goto found;
> }
> @@ -1578,12 +1578,12 @@ static ram_addr_t find_ram_offset(ram_addr_t size)
> return 0;
> }
>
> - QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
> + RAMBLOCK_FOREACH(block) {
> ram_addr_t end, next = RAM_ADDR_MAX;
>
> end = block->offset + block->max_length;
>
> - QLIST_FOREACH_RCU(next_block, &ram_list.blocks, next) {
> + RAMBLOCK_FOREACH(next_block) {
> if (next_block->offset >= end) {
> next = MIN(next, next_block->offset);
> }
> @@ -1609,7 +1609,7 @@ unsigned long last_ram_page(void)
> ram_addr_t last = 0;
>
> rcu_read_lock();
> - QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
> + RAMBLOCK_FOREACH(block) {
> last = MAX(last, block->offset + block->max_length);
> }
> rcu_read_unlock();
> @@ -1659,7 +1659,7 @@ void qemu_ram_set_idstr(RAMBlock *new_block, const char *name, DeviceState *dev)
> pstrcat(new_block->idstr, sizeof(new_block->idstr), name);
>
> rcu_read_lock();
> - QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
> + RAMBLOCK_FOREACH(block) {
> if (block != new_block &&
> !strcmp(block->idstr, new_block->idstr)) {
> fprintf(stderr, "RAMBlock \"%s\" already registered, abort!\n",
> @@ -1693,7 +1693,7 @@ size_t qemu_ram_pagesize_largest(void)
> RAMBlock *block;
> size_t largest = 0;
>
> - QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
> + RAMBLOCK_FOREACH(block) {
> largest = MAX(largest, qemu_ram_pagesize(block));
> }
>
> @@ -1839,7 +1839,7 @@ static void ram_block_add(RAMBlock *new_block, Error **errp)
> * QLIST (which has an RCU-friendly variant) does not have insertion at
> * tail, so save the last element in last_block.
> */
> - QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
> + RAMBLOCK_FOREACH(block) {
> last_block = block;
> if (block->max_length < new_block->max_length) {
> break;
> @@ -2021,7 +2021,7 @@ void qemu_ram_remap(ram_addr_t addr, ram_addr_t length)
> int flags;
> void *area, *vaddr;
>
> - QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
> + RAMBLOCK_FOREACH(block) {
> offset = addr - block->offset;
> if (offset < block->max_length) {
> vaddr = ramblock_ptr(block, offset);
> @@ -2167,7 +2167,7 @@ RAMBlock *qemu_ram_block_from_host(void *ptr, bool round_offset,
> goto found;
> }
>
> - QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
> + RAMBLOCK_FOREACH(block) {
> /* This case append when the block is not mapped. */
> if (block->host == NULL) {
> continue;
> @@ -2200,7 +2200,7 @@ RAMBlock *qemu_ram_block_by_name(const char *name)
> {
> RAMBlock *block;
>
> - QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
> + RAMBLOCK_FOREACH(block) {
> if (!strcmp(name, block->idstr)) {
> return block;
> }
> @@ -3424,7 +3424,7 @@ int qemu_ram_foreach_block(RAMBlockIterFunc func, void *opaque)
> int ret = 0;
>
> rcu_read_lock();
> - QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
> + RAMBLOCK_FOREACH(block) {
> ret = func(block->idstr, block->host, block->offset,
> block->used_length, opaque);
> if (ret) {
> diff --git a/include/exec/ramlist.h b/include/exec/ramlist.h
> index c59880d..f1c6b45 100644
> --- a/include/exec/ramlist.h
> +++ b/include/exec/ramlist.h
> @@ -4,6 +4,7 @@
> #include "qemu/queue.h"
> #include "qemu/thread.h"
> #include "qemu/rcu.h"
> +#include "qemu/rcu_queue.h"
>
> typedef struct RAMBlockNotifier RAMBlockNotifier;
>
> @@ -54,6 +55,10 @@ typedef struct RAMList {
> } RAMList;
> extern RAMList ram_list;
>
> +/* Should be holding either ram_list.mutex, or the RCU lock. */
> +#define RAMBLOCK_FOREACH(block) \
> + QLIST_FOREACH_RCU(block, &ram_list.blocks, next)
> +
> void qemu_mutex_lock_ramlist(void);
> void qemu_mutex_unlock_ramlist(void);
>
> diff --git a/migration/ram.c b/migration/ram.c
> index 293d27c..d88afea 100644
> --- a/migration/ram.c
> +++ b/migration/ram.c
> @@ -648,7 +648,7 @@ uint64_t ram_pagesize_summary(void)
> RAMBlock *block;
> uint64_t summary = 0;
>
> - QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
> + RAMBLOCK_FOREACH(block) {
> summary |= block->page_size;
> }
>
> @@ -676,7 +676,7 @@ static void migration_bitmap_sync(RAMState *rs)
>
> qemu_mutex_lock(&rs->bitmap_mutex);
> rcu_read_lock();
> - QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
> + RAMBLOCK_FOREACH(block) {
> migration_bitmap_sync_range(rs, block, 0, block->used_length);
> }
> rcu_read_unlock();
> @@ -1408,8 +1408,9 @@ uint64_t ram_bytes_total(void)
> uint64_t total = 0;
>
> rcu_read_lock();
> - QLIST_FOREACH_RCU(block, &ram_list.blocks, next)
> + RAMBLOCK_FOREACH(block) {
> total += block->used_length;
> + }
> rcu_read_unlock();
> return total;
> }
> @@ -1500,7 +1501,7 @@ void ram_postcopy_migrated_memory_release(MigrationState *ms)
> {
> struct RAMBlock *block;
>
> - QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
> + RAMBLOCK_FOREACH(block) {
> unsigned long *bitmap = block->bmap;
> unsigned long range = block->used_length >> TARGET_PAGE_BITS;
> unsigned long run_start = find_next_zero_bit(bitmap, range, 0);
> @@ -1578,7 +1579,7 @@ static int postcopy_each_ram_send_discard(MigrationState *ms)
> struct RAMBlock *block;
> int ret;
>
> - QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
> + RAMBLOCK_FOREACH(block) {
> PostcopyDiscardState *pds =
> postcopy_discard_send_init(ms, block->idstr);
>
> @@ -1961,7 +1962,7 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
>
> qemu_put_be64(f, ram_bytes_total() | RAM_SAVE_FLAG_MEM_SIZE);
>
> - QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
> + RAMBLOCK_FOREACH(block) {
> qemu_put_byte(f, strlen(block->idstr));
> qemu_put_buffer(f, (uint8_t *)block->idstr, strlen(block->idstr));
> qemu_put_be64(f, block->used_length);
> --
> 2.7.4
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
next prev parent reply other threads:[~2017-05-11 13:01 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-11 12:22 [Qemu-devel] [PATCH v7 0/4] ramblock: add hmp command "info ramblock" Peter Xu
2017-05-11 12:22 ` [Qemu-devel] [PATCH v7 1/4] ramblock: add RAMBLOCK_FOREACH() Peter Xu
2017-05-11 13:01 ` Dr. David Alan Gilbert [this message]
2017-05-11 12:22 ` [Qemu-devel] [PATCH v7 2/4] utils: provide size_to_str() Peter Xu
2017-05-11 13:05 ` Dr. David Alan Gilbert
2017-05-12 4:12 ` Peter Xu
2017-05-11 12:22 ` [Qemu-devel] [PATCH v7 3/4] ramblock: add new hmp command "info ramblock" Peter Xu
2017-05-11 12:22 ` [Qemu-devel] [PATCH v7 4/4] utils: remove assert in size_to_str() Peter Xu
2017-05-11 15:03 ` Eric Blake
2017-05-11 18:22 ` Markus Armbruster
2017-05-11 18:26 ` Eric Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170511130129.GF2078@work-vm \
--to=dgilbert@redhat.com \
--cc=armbru@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).