From: Hannes Reinecke <hare@suse.de>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alexander Graf <agraf@suse.com>,
qemu-devel@nongnu.org, Hannes Reinecke <hare@suse.de>,
Hannes Reinecke <hare@suse.com>
Subject: [Qemu-devel] [PATCH 3/4] scsi: per-request timeouts
Date: Fri, 12 May 2017 12:20:56 +0200 [thread overview]
Message-ID: <20170512102057.5855-4-hare@suse.de> (raw)
In-Reply-To: <20170512102057.5855-1-hare@suse.de>
Add a 'timeout' value per request to allow to specify individual
per-request timeouts.
Signed-off-by: Hannes Reinecke <hare@suse.com>
---
hw/scsi/scsi-bus.c | 1 +
hw/scsi/scsi-disk.c | 15 +++++++++++----
hw/scsi/scsi-generic.c | 12 ++++++++----
include/hw/scsi/scsi.h | 1 +
4 files changed, 21 insertions(+), 8 deletions(-)
diff --git a/hw/scsi/scsi-bus.c b/hw/scsi/scsi-bus.c
index f5574469c8..206000d873 100644
--- a/hw/scsi/scsi-bus.c
+++ b/hw/scsi/scsi-bus.c
@@ -690,6 +690,7 @@ SCSIRequest *scsi_req_new(SCSIDevice *d, uint32_t tag, uint32_t lun,
req->cmd = cmd;
req->resid = req->cmd.xfer;
+ req->timeout = d->timeout;
switch (buf[0]) {
case INQUIRY:
diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c
index 4ac4c872fe..6a6f091a9c 100644
--- a/hw/scsi/scsi-disk.c
+++ b/hw/scsi/scsi-disk.c
@@ -2503,7 +2503,9 @@ static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun,
printf("\n");
}
#endif
-
+ if (req) {
+ req->timeout = d->timeout;
+ }
return req;
}
@@ -2679,7 +2681,7 @@ static BlockAIOCB *scsi_block_do_sgio(SCSIBlockReq *req,
/* The rest is as in scsi-generic.c. */
io_header->mx_sb_len = sizeof(r->req.sense);
io_header->sbp = r->req.sense;
- io_header->timeout = s->qdev.timeout;
+ io_header->timeout = r->req.timeout;
io_header->usr_ptr = r;
io_header->flags |= SG_FLAG_DIRECT_IO;
@@ -2812,14 +2814,19 @@ static SCSIRequest *scsi_block_new_request(SCSIDevice *d, uint32_t tag,
void *hba_private)
{
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
+ struct SCSIRequest *req;
if (scsi_block_is_passthrough(s, buf)) {
- return scsi_req_alloc(&scsi_generic_req_ops, &s->qdev, tag, lun,
+ req = scsi_req_alloc(&scsi_generic_req_ops, &s->qdev, tag, lun,
hba_private);
} else {
- return scsi_req_alloc(&scsi_block_dma_reqops, &s->qdev, tag, lun,
+ req = scsi_req_alloc(&scsi_block_dma_reqops, &s->qdev, tag, lun,
hba_private);
}
+ if (req) {
+ req->timeout = d->timeout;
+ }
+ return req;
}
static int scsi_block_parse_cdb(SCSIDevice *d, SCSICommand *cmd,
diff --git a/hw/scsi/scsi-generic.c b/hw/scsi/scsi-generic.c
index 998b6a4558..31c3a75bad 100644
--- a/hw/scsi/scsi-generic.c
+++ b/hw/scsi/scsi-generic.c
@@ -157,8 +157,6 @@ static int execute_command(BlockBackend *blk,
SCSIGenericReq *r, int direction,
BlockCompletionFunc *complete)
{
- SCSIDevice *s = r->req.dev;
-
r->io_header.interface_id = 'S';
r->io_header.dxfer_direction = direction;
r->io_header.dxferp = r->buf;
@@ -167,7 +165,7 @@ static int execute_command(BlockBackend *blk,
r->io_header.cmd_len = r->req.cmd.len;
r->io_header.mx_sb_len = sizeof(r->req.sense);
r->io_header.sbp = r->req.sense;
- r->io_header.timeout = s->timeout;
+ r->io_header.timeout = r->req.timeout;
r->io_header.usr_ptr = r;
r->io_header.flags |= SG_FLAG_DIRECT_IO;
@@ -596,7 +594,13 @@ const SCSIReqOps scsi_generic_req_ops = {
static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun,
uint8_t *buf, void *hba_private)
{
- return scsi_req_alloc(&scsi_generic_req_ops, d, tag, lun, hba_private);
+ struct SCSIRequest *req;
+
+ req = scsi_req_alloc(&scsi_generic_req_ops, d, tag, lun, hba_private);
+ if (req) {
+ req->timeout = d->timeout;
+ }
+ return req;
}
static Property scsi_generic_properties[] = {
diff --git a/include/hw/scsi/scsi.h b/include/hw/scsi/scsi.h
index a976e85cfa..6c51ddc3ef 100644
--- a/include/hw/scsi/scsi.h
+++ b/include/hw/scsi/scsi.h
@@ -51,6 +51,7 @@ struct SCSIRequest {
uint32_t tag;
uint32_t lun;
uint32_t status;
+ uint32_t timeout;
void *hba_private;
size_t resid;
SCSICommand cmd;
--
2.12.0
next prev parent reply other threads:[~2017-05-12 10:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-12 10:20 [Qemu-devel] [RFC PATCH 0/4] Virtio command timeouts (qemu part) Hannes Reinecke
2017-05-12 10:20 ` [Qemu-devel] [PATCH 1/4] scsi: make default command timeout user-settable Hannes Reinecke
2017-05-12 10:20 ` [Qemu-devel] [PATCH 2/4] scsi: use host default timeouts for SCSI commands Hannes Reinecke
2017-05-12 10:20 ` Hannes Reinecke [this message]
2017-05-12 10:20 ` [Qemu-devel] [PATCH 4/4] virtio: implement VIRTIO_SCSI_F_TIMEOUT feature Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170512102057.5855-4-hare@suse.de \
--to=hare@suse.de \
--cc=agraf@suse.com \
--cc=hare@suse.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).