From: "Michael S. Tsirkin" <mst@redhat.com>
To: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: peterx@redhat.com, marcandre.lureau@gmail.com,
vkaplans@redhat.com, jasowang@redhat.com, wexu@redhat.com,
yuanhan.liu@linux.intel.com, qemu-devel@nongnu.org,
jfreiman@redhat.com
Subject: Re: [Qemu-devel] [PATCH 6/6] spec/vhost-user spec: Add IOMMU support
Date: Wed, 17 May 2017 19:48:01 +0300 [thread overview]
Message-ID: <20170517194401-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <20170511123246.31308-7-maxime.coquelin@redhat.com>
On Thu, May 11, 2017 at 02:32:46PM +0200, Maxime Coquelin wrote:
> This patch specifies and implements the master/slave communication
> to support device IOTLB in slave.
>
> The vhost_iotlb_msg structure introduced for kernel backends is
> re-used, making the design close between the two backends.
>
> An exception is the use of the secondary channel to enable the
> slave to send IOTLB miss requests to the master.
>
> Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
> ---
> docs/specs/vhost-user.txt | 75 +++++++++++++++++++++++++++++++++++++++++++++++
> hw/virtio/vhost-user.c | 31 ++++++++++++++++++++
> 2 files changed, 106 insertions(+)
>
> diff --git a/docs/specs/vhost-user.txt b/docs/specs/vhost-user.txt
> index 5fa7016..4a1f0c3 100644
> --- a/docs/specs/vhost-user.txt
> +++ b/docs/specs/vhost-user.txt
> @@ -97,6 +97,23 @@ Depending on the request type, payload can be:
> log offset: offset from start of supplied file descriptor
> where logging starts (i.e. where guest address 0 would be logged)
>
> + * An IOTLB message
> + ---------------------------------------------------------
> + | iova | size | user address | permissions flags | type |
> + ---------------------------------------------------------
> +
> + IOVA: a 64-bit guest I/O virtual address
> + Size: a 64-bit size
> + User address: a 64-bit user address
> + Permissions flags: a 8-bit bit field:
> + - Bit 0: Read access
> + - Bit 1: Write access
> + Type: a 8-bit IOTLB message type:
> + - 1: IOTLB miss
> + - 2: IOTLB update
> + - 3: IOTLB invalidate
> + - 4: IOTLB access fail
> +
> In QEMU the vhost-user message is implemented with the following struct:
>
> typedef struct VhostUserMsg {
> @@ -109,6 +126,7 @@ typedef struct VhostUserMsg {
> struct vhost_vring_addr addr;
> VhostUserMemory memory;
> VhostUserLog log;
> + struct vhost_iotlb_msg iotlb;
> };
> } QEMU_PACKED VhostUserMsg;
>
> @@ -253,6 +271,31 @@ Once the source has finished migration, rings will be stopped by
> the source. No further update must be done before rings are
> restarted.
>
> +IOMMU support
> +-------------
> +
> +When the VIRTIO_F_IOMMU_PLATFORM feature has been negotiated, the master has
> +to send IOTLB entries update & invalidation by sending VHOST_USER_IOTLB_MSG
> +requests to the slave with a struct vhost_iotlb_msg payload. For update events,
> +the iotlb payload has to be filled with the update message type (2), the I/O
> +virtual address, the size, the user virtual address, and the permissions
> +flags. For invalidation events, the iotlb payload has to be filled with the
> +invalidation message type (3), the I/O virtual address and the size. On
> +success, the slave is expected to reply with a zero payload, non-zero
> +otherwise.
> +
> +When the VHOST_USER_PROTOCOL_F_SLAVE_REQ is supported by the slave, and the
> +master initiated the slave to master communication channel using the
> +VHOST_USER_SET_SLAVE_REQ_FD request, the slave can send IOTLB miss and access
> +failure events by sending VHOST_USER_SLAVE_IOTLB_MSG requests to the master
> +with a struct vhost_iotlb_msg payload. For miss events, the iotlb payload has
> +to be filled with the miss message type (1), the I/O virtual address and the
> +permissions flags. For access failure event, the iotlb payload has to be
> +filled with the access failure message type (4), the I/O virtual address and
> +the permissions flags.
I don't think slave should cache invalid entries. If it does not,
how can it detect access failure as opposed to a miss?
> For synchronization purpose, the slave may rely on the
> +reply-ack feature, so the master may send a reply when operation is completed
What does completed mean in this context?
> +if the reply-ack feature is negotiated and slaves requests a reply.
> +
This is not very clear to me.
So slave sends an access to master. Master finds a pte that
overlaps. What does it send to guest? Initial PTE?
All PTEs to cover the request? Part of the PTE that overlaps
the request?
> Slave communication
> -------------------
>
> @@ -514,6 +557,38 @@ Master message types
> If VHOST_USER_PROTOCOL_F_REPLY_ACK is negotiated, slave must respond
> with zero for success, non-zero otherwise.
>
> + * VHOST_USER_IOTLB_MSG
> +
> + Id: 22
> + Equivalent ioctl: N/A (equivalent to VHOST_IOTLB_MSG message type)
> + Master payload: struct vhost_iotlb_msg
> + Slave payload: u64
> +
> + Send IOTLB messages with struct vhost_iotlb_msg as payload.
> + Master sends such requests to update and invalidate entries in the device
> + IOTLB. The slave has to acknowledge the request with sending zero as u64
> + payload for success, non-zero otherwise.
> + This request should be send only when VIRTIO_F_IOMMU_PLATFORM feature
> + has been successfully negotiated.
> +
> +Slave message types
> +-------------------
> +
> + * VHOST_USER_SLAVE_IOTLB_MSG
> +
> + Id: 1
> + Equivalent ioctl: N/A (equivalent to VHOST_IOTLB_MSG message type)
> + Slave payload: struct vhost_iotlb_msg
> + Master payload: N/A
> +
> + Send IOTLB messages with struct vhost_iotlb_msg as payload.
> + Slave sends such requests to notify of an IOTLB miss, or an IOTLB
> + access failure. If VHOST_USER_PROTOCOL_F_REPLY_ACK is negotiated,
> + and slave set the VHOST_USER_NEED_REPLY flag, master must respond with
> + zero when operation is successfully completed, or non-zero otherwise.
> + This request should be send only when VIRTIO_F_IOMMU_PLATFORM feature
> + has been successfully negotiated.
> +
> VHOST_USER_PROTOCOL_F_REPLY_ACK:
> -------------------------------
> The original vhost-user specification only demands replies for certain
> diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c
> index fbc09fa..2c93181 100644
> --- a/hw/virtio/vhost-user.c
> +++ b/hw/virtio/vhost-user.c
> @@ -63,11 +63,13 @@ typedef enum VhostUserRequest {
> VHOST_USER_SEND_RARP = 19,
> VHOST_USER_NET_SET_MTU = 20,
> VHOST_USER_SET_SLAVE_REQ_FD = 21,
> + VHOST_USER_IOTLB_MSG = 22,
> VHOST_USER_MAX
> } VhostUserRequest;
>
> typedef enum VhostUserSlaveRequest {
> VHOST_USER_SLAVE_NONE = 0,
> + VHOST_USER_SLAVE_IOTLB_MSG = 1,
> VHOST_USER_SLAVE_MAX
> } VhostUserSlaveRequest;
>
> @@ -105,6 +107,7 @@ typedef struct VhostUserMsg {
> struct vhost_vring_addr addr;
> VhostUserMemory memory;
> VhostUserLog log;
> + struct vhost_iotlb_msg iotlb;
> } payload;
> } QEMU_PACKED VhostUserMsg;
>
> @@ -611,6 +614,9 @@ static void slave_read(void *opaque)
> }
>
> switch (msg.request) {
> + case VHOST_USER_SLAVE_IOTLB_MSG:
> + ret = vhost_backend_handle_iotlb_msg(dev, &msg.payload.iotlb);
> + break;
> default:
> error_report("Received unexpected msg type.");
> ret = -EINVAL;
> @@ -858,6 +864,29 @@ static int vhost_user_net_set_mtu(struct vhost_dev *dev, uint16_t mtu)
> return 0;
> }
>
> +static int vhost_user_send_device_iotlb_msg(struct vhost_dev *dev,
> + struct vhost_iotlb_msg *imsg)
> +{
> + VhostUserMsg msg = {
> + .request = VHOST_USER_IOTLB_MSG,
> + .size = sizeof(msg.payload.iotlb),
> + .flags = VHOST_USER_VERSION | VHOST_USER_NEED_REPLY_MASK,
> + .payload.iotlb = *imsg,
> + };
> +
> + if (vhost_user_write(dev, &msg, NULL, 0) < 0) {
> + return -EFAULT;
> + }
> +
> + return process_message_reply(dev, msg.request);
> +}
> +
> +
> +static void vhost_user_set_iotlb_callback(struct vhost_dev *dev, int enabled)
> +{
> + /* No-op as the receive channel is not dedicated to IOTLB messages. */
> +}
> +
> const VhostOps user_ops = {
> .backend_type = VHOST_BACKEND_TYPE_USER,
> .vhost_backend_init = vhost_user_init,
> @@ -882,4 +911,6 @@ const VhostOps user_ops = {
> .vhost_migration_done = vhost_user_migration_done,
> .vhost_backend_can_merge = vhost_user_can_merge,
> .vhost_net_set_mtu = vhost_user_net_set_mtu,
> + .vhost_set_iotlb_callback = vhost_user_set_iotlb_callback,
> + .vhost_send_device_iotlb_msg = vhost_user_send_device_iotlb_msg,
> };
> --
> 2.9.3
next prev parent reply other threads:[~2017-05-17 16:48 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-11 12:32 [Qemu-devel] [PATCH 0/6] vhost-user: Specify and implement device IOTLB support Maxime Coquelin
2017-05-11 12:32 ` [Qemu-devel] [PATCH 1/6] vhost: propagate errors in vhost_device_iotlb_miss() Maxime Coquelin
2017-05-11 12:32 ` [Qemu-devel] [PATCH 2/6] vhost: rework IOTLB messaging Maxime Coquelin
2017-05-11 12:32 ` [Qemu-devel] [PATCH 3/6] vhost: Update rings information for IOTLB earlier Maxime Coquelin
2017-05-11 17:33 ` Michael S. Tsirkin
2017-05-12 11:21 ` Maxime Coquelin
2017-05-17 16:41 ` Michael S. Tsirkin
2017-05-18 7:35 ` Maxime Coquelin
2017-05-18 14:45 ` Maxime Coquelin
2017-05-18 15:24 ` Michael S. Tsirkin
2017-05-19 9:48 ` Maxime Coquelin
2017-05-19 20:37 ` Michael S. Tsirkin
2017-05-11 12:32 ` [Qemu-devel] [PATCH 4/6] vhost-user: add vhost_user to hold the chr Maxime Coquelin
2017-05-11 12:32 ` [Qemu-devel] [PATCH 5/6] vhost-user: add slave-req-fd support Maxime Coquelin
2017-05-11 12:32 ` [Qemu-devel] [PATCH 6/6] spec/vhost-user spec: Add IOMMU support Maxime Coquelin
2017-05-11 18:25 ` Michael S. Tsirkin
2017-05-12 14:21 ` Maxime Coquelin
2017-05-13 0:02 ` Michael S. Tsirkin
2017-05-15 5:45 ` Jason Wang
2017-05-16 15:16 ` Michael S. Tsirkin
2017-05-17 2:53 ` Jason Wang
2017-05-17 14:10 ` Maxime Coquelin
2017-05-19 6:48 ` Jason Wang
2017-05-19 8:35 ` Maxime Coquelin
2017-05-17 15:27 ` Maxime Coquelin
2017-05-16 8:19 ` Maxime Coquelin
2017-05-16 13:23 ` Michael S. Tsirkin
2017-05-17 16:48 ` Michael S. Tsirkin [this message]
2017-05-18 8:43 ` Maxime Coquelin
2017-05-19 7:46 ` Jason Wang
2017-05-19 16:42 ` Michael S. Tsirkin
2017-05-11 13:25 ` [Qemu-devel] [PATCH 0/6] vhost-user: Specify and implement device IOTLB support no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170517194401-mutt-send-email-mst@kernel.org \
--to=mst@redhat.com \
--cc=jasowang@redhat.com \
--cc=jfreiman@redhat.com \
--cc=marcandre.lureau@gmail.com \
--cc=maxime.coquelin@redhat.com \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=vkaplans@redhat.com \
--cc=wexu@redhat.com \
--cc=yuanhan.liu@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).