From: "Michael S. Tsirkin" <mst@redhat.com>
To: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: peterx@redhat.com, marcandre.lureau@gmail.com,
vkaplans@redhat.com, jasowang@redhat.com, wexu@redhat.com,
yuanhan.liu@linux.intel.com, qemu-devel@nongnu.org,
jfreiman@redhat.com
Subject: Re: [Qemu-devel] [PATCH v2 6/6] spec/vhost-user spec: Add IOMMU support
Date: Tue, 30 May 2017 21:08:53 +0300 [thread overview]
Message-ID: <20170530210457-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <20170526142858.19931-7-maxime.coquelin@redhat.com>
On Fri, May 26, 2017 at 04:28:58PM +0200, Maxime Coquelin wrote:
> This patch specifies and implements the master/slave communication
> to support device IOTLB in slave.
>
> The vhost_iotlb_msg structure introduced for kernel backends is
> re-used, making the design close between the two backends.
>
> An exception is the use of the secondary channel to enable the
> slave to send IOTLB miss requests to the master.
>
> Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
> ---
>
> v2:
> - spec: fixed possible permission field values
> - spec: rewrote "IOMMU support" section
> docs/specs/vhost-user.txt | 86 +++++++++++++++++++++++++++++++++++++++++++++++
> hw/virtio/vhost-user.c | 31 +++++++++++++++++
> 2 files changed, 117 insertions(+)
>
> diff --git a/docs/specs/vhost-user.txt b/docs/specs/vhost-user.txt
> index 5fa7016..0799ef1 100644
> --- a/docs/specs/vhost-user.txt
> +++ b/docs/specs/vhost-user.txt
> @@ -97,6 +97,25 @@ Depending on the request type, payload can be:
> log offset: offset from start of supplied file descriptor
> where logging starts (i.e. where guest address 0 would be logged)
>
> + * An IOTLB message
> + ---------------------------------------------------------
> + | iova | size | user address | permissions flags | type |
> + ---------------------------------------------------------
> +
> + IOVA: a 64-bit I/O virtual address programmed by the guest
> + Size: a 64-bit size
> + User address: a 64-bit user address
> + Permissions: a 8-bit value:
> + - 0: No access
> + - 1: Read access
> + - 2: Write access
> + - 3: Read/Write access
> + Type: a 8-bit IOTLB message type:
> + - 1: IOTLB miss
> + - 2: IOTLB update
> + - 3: IOTLB invalidate
> + - 4: IOTLB access fail
> +
> In QEMU the vhost-user message is implemented with the following struct:
>
> typedef struct VhostUserMsg {
> @@ -109,6 +128,7 @@ typedef struct VhostUserMsg {
> struct vhost_vring_addr addr;
> VhostUserMemory memory;
> VhostUserLog log;
> + struct vhost_iotlb_msg iotlb;
> };
> } QEMU_PACKED VhostUserMsg;
>
> @@ -253,6 +273,40 @@ Once the source has finished migration, rings will be stopped by
> the source. No further update must be done before rings are
> restarted.
>
> +IOMMU support
> +-------------
> +
> +When the VIRTIO_F_IOMMU_PLATFORM feature has been negotiated, the master
> +sends IOTLB entries update & invalidation by sending VHOST_USER_IOTLB_MSG
> +requests to the slave with a struct vhost_iotlb_msg as payload. For update
> +events, the iotlb payload has to be filled with the update message type (2),
> +the I/O virtual address, the size, the user virtual address, and the
> +permissions flags. Addresses and size must be within vhost memory regions set
> +via the VHOST_USER_SET_MEM_TABLE request. For invalidation events, the iotlb
> +payload has to be filled with the invalidation message type (3), the I/O virtual
> +address and the size. On success, the slave is expected to reply with a zero
> +payload, non-zero otherwise.
> +
> +The slave relies on the slave communcation channel (see "Slave communication"
> +section below) to send IOTLB miss and access failure events, by sending
> +VHOST_USER_SLAVE_IOTLB_MSG requests to the master with a struct vhost_iotlb_msg
> +as payload. For miss events, the iotlb payload has to be filled with the miss
> +message type (1), the I/O virtual address and the permissions flags. For access
> +failure event, the iotlb payload has to be filled with the access failure
> +message type (4), the I/O virtual address and the permissions flags.
> +For synchronization purpose, the slave may rely on the reply-ack feature,
> +so the master may send a reply when operation is completed if the reply-ack
> +feature is negotiated and slaves requests a reply. For miss events, completed
> +operation means either master sent an update message containing the IOTLB entry
> +containing requested address and permission, or master sent nothing if the IOTLB
> +miss message is invalid (invalid IOVA or permission).
> +
> +The master isn't generally expected to take the initiative to send IOTLB update
> +messages, as the slave sends IOTLB miss messages for the guest virtual memory
> +areas it needs to access. The exception is the rings information addresses
> +shared with the VHOST_USER_SET_VRING_ADDR request, for which the master must
> +send corresponding IOTLB updates before the rings are enabled.
> +
Is the implication that invalidates do not affect ring translations
true? I find this problematic.
If not then can we replace above with "may send"?
> Slave communication
> -------------------
>
> @@ -514,6 +568,38 @@ Master message types
> If VHOST_USER_PROTOCOL_F_REPLY_ACK is negotiated, slave must respond
> with zero for success, non-zero otherwise.
>
> + * VHOST_USER_IOTLB_MSG
> +
> + Id: 22
> + Equivalent ioctl: N/A (equivalent to VHOST_IOTLB_MSG message type)
> + Master payload: struct vhost_iotlb_msg
> + Slave payload: u64
> +
> + Send IOTLB messages with struct vhost_iotlb_msg as payload.
> + Master sends such requests to update and invalidate entries in the device
> + IOTLB. The slave has to acknowledge the request with sending zero as u64
> + payload for success, non-zero otherwise.
> + This request should be send only when VIRTIO_F_IOMMU_PLATFORM feature
> + has been successfully negotiated.
> +
> +Slave message types
> +-------------------
> +
> + * VHOST_USER_SLAVE_IOTLB_MSG
> +
> + Id: 1
> + Equivalent ioctl: N/A (equivalent to VHOST_IOTLB_MSG message type)
> + Slave payload: struct vhost_iotlb_msg
> + Master payload: N/A
> +
> + Send IOTLB messages with struct vhost_iotlb_msg as payload.
> + Slave sends such requests to notify of an IOTLB miss, or an IOTLB
> + access failure. If VHOST_USER_PROTOCOL_F_REPLY_ACK is negotiated,
> + and slave set the VHOST_USER_NEED_REPLY flag, master must respond with
> + zero when operation is successfully completed, or non-zero otherwise.
> + This request should be send only when VIRTIO_F_IOMMU_PLATFORM feature
> + has been successfully negotiated.
> +
> VHOST_USER_PROTOCOL_F_REPLY_ACK:
> -------------------------------
> The original vhost-user specification only demands replies for certain
> diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c
> index ea988fe..170fa68 100644
> --- a/hw/virtio/vhost-user.c
> +++ b/hw/virtio/vhost-user.c
> @@ -62,11 +62,13 @@ typedef enum VhostUserRequest {
> VHOST_USER_SEND_RARP = 19,
> VHOST_USER_NET_SET_MTU = 20,
> VHOST_USER_SET_SLAVE_REQ_FD = 21,
> + VHOST_USER_IOTLB_MSG = 22,
> VHOST_USER_MAX
> } VhostUserRequest;
>
> typedef enum VhostUserSlaveRequest {
> VHOST_USER_SLAVE_NONE = 0,
> + VHOST_USER_SLAVE_IOTLB_MSG = 1,
> VHOST_USER_SLAVE_MAX
> } VhostUserSlaveRequest;
>
> @@ -104,6 +106,7 @@ typedef struct VhostUserMsg {
> struct vhost_vring_addr addr;
> VhostUserMemory memory;
> VhostUserLog log;
> + struct vhost_iotlb_msg iotlb;
> } payload;
> } QEMU_PACKED VhostUserMsg;
>
> @@ -615,6 +618,9 @@ static void slave_read(void *opaque)
> }
>
> switch (msg.request) {
> + case VHOST_USER_SLAVE_IOTLB_MSG:
> + ret = vhost_backend_handle_iotlb_msg(dev, &msg.payload.iotlb);
> + break;
> default:
> error_report("Received unexpected msg type.");
> ret = -EINVAL;
> @@ -862,6 +868,29 @@ static int vhost_user_net_set_mtu(struct vhost_dev *dev, uint16_t mtu)
> return 0;
> }
>
> +static int vhost_user_send_device_iotlb_msg(struct vhost_dev *dev,
> + struct vhost_iotlb_msg *imsg)
> +{
> + VhostUserMsg msg = {
> + .request = VHOST_USER_IOTLB_MSG,
> + .size = sizeof(msg.payload.iotlb),
> + .flags = VHOST_USER_VERSION | VHOST_USER_NEED_REPLY_MASK,
> + .payload.iotlb = *imsg,
> + };
> +
> + if (vhost_user_write(dev, &msg, NULL, 0) < 0) {
> + return -EFAULT;
> + }
> +
> + return process_message_reply(dev, msg);
> +}
> +
> +
> +static void vhost_user_set_iotlb_callback(struct vhost_dev *dev, int enabled)
> +{
> + /* No-op as the receive channel is not dedicated to IOTLB messages. */
> +}
> +
> const VhostOps user_ops = {
> .backend_type = VHOST_BACKEND_TYPE_USER,
> .vhost_backend_init = vhost_user_init,
> @@ -886,4 +915,6 @@ const VhostOps user_ops = {
> .vhost_migration_done = vhost_user_migration_done,
> .vhost_backend_can_merge = vhost_user_can_merge,
> .vhost_net_set_mtu = vhost_user_net_set_mtu,
> + .vhost_set_iotlb_callback = vhost_user_set_iotlb_callback,
> + .vhost_send_device_iotlb_msg = vhost_user_send_device_iotlb_msg,
> };
> --
> 2.9.4
next prev parent reply other threads:[~2017-05-30 18:09 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-26 14:28 [Qemu-devel] [PATCH v2 0/6] vhost-user: Specify and implement device IOTLB support Maxime Coquelin
2017-05-26 14:28 ` [Qemu-devel] [PATCH v2 1/6] vhost: propagate errors in vhost_device_iotlb_miss() Maxime Coquelin
2017-05-26 14:28 ` [Qemu-devel] [PATCH v2 2/6] vhost: rework IOTLB messaging Maxime Coquelin
2017-05-26 14:28 ` [Qemu-devel] [PATCH v2 3/6] vhost: extend ring information update for IOTLB to all rings Maxime Coquelin
2017-05-30 18:12 ` Michael S. Tsirkin
2017-05-30 21:06 ` Maxime Coquelin
2017-05-30 21:11 ` Maxime Coquelin
2017-05-31 15:20 ` Maxime Coquelin
2017-06-01 13:55 ` Michael S. Tsirkin
2017-06-01 13:54 ` Michael S. Tsirkin
2017-05-31 8:48 ` Jason Wang
2017-05-26 14:28 ` [Qemu-devel] [PATCH v2 4/6] vhost-user: add vhost_user to hold the chr Maxime Coquelin
2017-05-26 14:28 ` [Qemu-devel] [PATCH v2 5/6] vhost-user: add slave-req-fd support Maxime Coquelin
2017-05-30 18:17 ` Michael S. Tsirkin
2017-05-30 21:26 ` Maxime Coquelin
2017-05-26 14:28 ` [Qemu-devel] [PATCH v2 6/6] spec/vhost-user spec: Add IOMMU support Maxime Coquelin
2017-05-30 18:08 ` Michael S. Tsirkin [this message]
2017-05-30 16:15 ` [Qemu-devel] [PATCH v2 0/6] vhost-user: Specify and implement device IOTLB support Maxime Coquelin
2017-05-30 18:20 ` Michael S. Tsirkin
2017-05-31 8:33 ` Jason Wang
2017-05-31 15:32 ` Maxime Coquelin
2017-06-01 7:04 ` Jason Wang
2017-06-01 8:39 ` Maxime Coquelin
2017-06-01 13:59 ` Michael S. Tsirkin
2017-06-02 5:53 ` Jason Wang
2017-06-02 15:24 ` Michael S. Tsirkin
2017-06-05 8:51 ` Jason Wang
2017-06-05 15:08 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170530210457-mutt-send-email-mst@kernel.org \
--to=mst@redhat.com \
--cc=jasowang@redhat.com \
--cc=jfreiman@redhat.com \
--cc=marcandre.lureau@gmail.com \
--cc=maxime.coquelin@redhat.com \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=vkaplans@redhat.com \
--cc=wexu@redhat.com \
--cc=yuanhan.liu@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).