From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: Juan Quintela <quintela@redhat.com>
Cc: qemu-devel@nongnu.org, lvivier@redhat.com, peterx@redhat.com,
kwolf@redhat.com, stefanha@redhat.com
Subject: Re: [Qemu-devel] [PATCH v2 1/5] migration: Rename save_live_setup() to save_setup()
Date: Fri, 16 Jun 2017 18:30:00 +0100 [thread overview]
Message-ID: <20170616173000.GB19805@work-vm> (raw)
In-Reply-To: <20170613095338.11560-2-quintela@redhat.com>
* Juan Quintela (quintela@redhat.com) wrote:
> We are going to use it now for more than save live regions.
> Once there rename qemu_savevm_state_begin() to qemu_savevm_state_setup().
>
> Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
> ---
> hw/ppc/spapr.c | 2 +-
> include/migration/register.h | 2 +-
> migration/block.c | 2 +-
> migration/colo.c | 2 +-
> migration/migration.c | 2 +-
> migration/ram.c | 2 +-
> migration/savevm.c | 12 ++++++------
> migration/savevm.h | 2 +-
> migration/trace-events | 2 +-
> 9 files changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
> index dcd44a1..7db5396 100644
> --- a/hw/ppc/spapr.c
> +++ b/hw/ppc/spapr.c
> @@ -1868,7 +1868,7 @@ static void htab_cleanup(void *opaque)
> }
>
> static SaveVMHandlers savevm_htab_handlers = {
> - .save_live_setup = htab_save_setup,
> + .save_setup = htab_save_setup,
> .save_live_iterate = htab_save_iterate,
> .save_live_complete_precopy = htab_save_complete,
> .cleanup = htab_cleanup,
> diff --git a/include/migration/register.h b/include/migration/register.h
> index 717c617..333e3df 100644
> --- a/include/migration/register.h
> +++ b/include/migration/register.h
> @@ -36,7 +36,7 @@ typedef struct SaveVMHandlers {
> int (*save_live_iterate)(QEMUFile *f, void *opaque);
>
> /* This runs outside the iothread lock! */
> - int (*save_live_setup)(QEMUFile *f, void *opaque);
> + int (*save_setup)(QEMUFile *f, void *opaque);
> void (*save_live_pending)(QEMUFile *f, void *opaque,
> uint64_t threshold_size,
> uint64_t *non_postcopiable_pending,
> diff --git a/migration/block.c b/migration/block.c
> index 3aae5a3..c160d41 100644
> --- a/migration/block.c
> +++ b/migration/block.c
> @@ -1007,7 +1007,7 @@ static bool block_is_active(void *opaque)
> }
>
> static SaveVMHandlers savevm_block_handlers = {
> - .save_live_setup = block_save_setup,
> + .save_setup = block_save_setup,
> .save_live_iterate = block_save_iterate,
> .save_live_complete_precopy = block_save_complete,
> .save_live_pending = block_save_pending,
> diff --git a/migration/colo.c b/migration/colo.c
> index c436d63..8bc1690 100644
> --- a/migration/colo.c
> +++ b/migration/colo.c
> @@ -350,7 +350,7 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
> /* Disable block migration */
> migrate_set_block_enabled(false, &local_err);
> qemu_savevm_state_header(fb);
> - qemu_savevm_state_begin(fb);
> + qemu_savevm_state_setup(fb);
> qemu_mutex_lock_iothread();
> qemu_savevm_state_complete_precopy(fb, false);
> qemu_mutex_unlock_iothread();
> diff --git a/migration/migration.c b/migration/migration.c
> index 52dac9d..0799424 100644
> --- a/migration/migration.c
> +++ b/migration/migration.c
> @@ -1825,7 +1825,7 @@ static void *migration_thread(void *opaque)
> qemu_savevm_send_postcopy_advise(s->to_dst_file);
> }
>
> - qemu_savevm_state_begin(s->to_dst_file);
> + qemu_savevm_state_setup(s->to_dst_file);
>
> s->setup_time = qemu_clock_get_ms(QEMU_CLOCK_HOST) - setup_start;
> migrate_set_state(&s->state, MIGRATION_STATUS_SETUP,
> diff --git a/migration/ram.c b/migration/ram.c
> index 7f687f5..3454bf7 100644
> --- a/migration/ram.c
> +++ b/migration/ram.c
> @@ -2605,7 +2605,7 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
> }
>
> static SaveVMHandlers savevm_ram_handlers = {
> - .save_live_setup = ram_save_setup,
> + .save_setup = ram_save_setup,
> .save_live_iterate = ram_save_iterate,
> .save_live_complete_postcopy = ram_save_complete,
> .save_live_complete_precopy = ram_save_complete,
> diff --git a/migration/savevm.c b/migration/savevm.c
> index f32a82d..7f2a5bd 100644
> --- a/migration/savevm.c
> +++ b/migration/savevm.c
> @@ -606,7 +606,7 @@ int register_savevm_live(DeviceState *dev,
> se->opaque = opaque;
> se->vmsd = NULL;
> /* if this is a live_savem then set is_ram */
> - if (ops->save_live_setup != NULL) {
> + if (ops->save_setup != NULL) {
> se->is_ram = 1;
> }
>
> @@ -977,14 +977,14 @@ void qemu_savevm_state_header(QEMUFile *f)
>
> }
>
> -void qemu_savevm_state_begin(QEMUFile *f)
> +void qemu_savevm_state_setup(QEMUFile *f)
> {
> SaveStateEntry *se;
> int ret;
>
> - trace_savevm_state_begin();
> + trace_savevm_state_setup();
> QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
> - if (!se->ops || !se->ops->save_live_setup) {
> + if (!se->ops || !se->ops->save_setup) {
> continue;
> }
> if (se->ops && se->ops->is_active) {
> @@ -994,7 +994,7 @@ void qemu_savevm_state_begin(QEMUFile *f)
> }
> save_section_header(f, se, QEMU_VM_SECTION_START);
>
> - ret = se->ops->save_live_setup(f, se->opaque);
> + ret = se->ops->save_setup(f, se->opaque);
> save_section_footer(f, se);
> if (ret < 0) {
> qemu_file_set_error(f, ret);
> @@ -1252,7 +1252,7 @@ static int qemu_savevm_state(QEMUFile *f, Error **errp)
>
> qemu_mutex_unlock_iothread();
> qemu_savevm_state_header(f);
> - qemu_savevm_state_begin(f);
> + qemu_savevm_state_setup(f);
> qemu_mutex_lock_iothread();
>
> while (qemu_file_get_error(f) == 0) {
> diff --git a/migration/savevm.h b/migration/savevm.h
> index 45b59c1..54ce8f6 100644
> --- a/migration/savevm.h
> +++ b/migration/savevm.h
> @@ -30,7 +30,7 @@
> #define QEMU_VM_SECTION_FOOTER 0x7e
>
> bool qemu_savevm_state_blocked(Error **errp);
> -void qemu_savevm_state_begin(QEMUFile *f);
> +void qemu_savevm_state_setup(QEMUFile *f);
> void qemu_savevm_state_header(QEMUFile *f);
> int qemu_savevm_state_iterate(QEMUFile *f, bool postcopy);
> void qemu_savevm_state_cleanup(void);
> diff --git a/migration/trace-events b/migration/trace-events
> index 38345be..9669e94 100644
> --- a/migration/trace-events
> +++ b/migration/trace-events
> @@ -32,7 +32,7 @@ savevm_send_open_return_path(void) ""
> savevm_send_ping(uint32_t val) "%x"
> savevm_send_postcopy_listen(void) ""
> savevm_send_postcopy_run(void) ""
> -savevm_state_begin(void) ""
> +savevm_state_setup(void) ""
> savevm_state_header(void) ""
> savevm_state_iterate(void) ""
> savevm_state_cleanup(void) ""
> --
> 2.9.4
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
next prev parent reply other threads:[~2017-06-16 17:30 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-13 9:53 [Qemu-devel] [PATCH v2 0/5] Create setup/cleanup methods for migration incoming side Juan Quintela
2017-06-13 9:53 ` [Qemu-devel] [PATCH v2 1/5] migration: Rename save_live_setup() to save_setup() Juan Quintela
2017-06-16 17:30 ` Dr. David Alan Gilbert [this message]
2017-06-13 9:53 ` [Qemu-devel] [PATCH v2 2/5] migration: Rename cleanup() to save_cleanup() Juan Quintela
2017-06-16 17:33 ` Dr. David Alan Gilbert
2017-06-13 9:53 ` [Qemu-devel] [PATCH v2 3/5] migration: Create load_setup()/cleanup() methods Juan Quintela
2017-06-16 17:54 ` Dr. David Alan Gilbert
2017-06-13 9:53 ` [Qemu-devel] [PATCH v2 4/5] migration: Convert ram to use new load_setup()/load_cleanup() Juan Quintela
2017-06-16 18:00 ` Dr. David Alan Gilbert
2017-06-21 11:33 ` Juan Quintela
2017-06-13 9:53 ` [Qemu-devel] [PATCH v2 5/5] migration: Make compression_threads use save/load_setup/cleanup() Juan Quintela
2017-06-16 18:04 ` Dr. David Alan Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170616173000.GB19805@work-vm \
--to=dgilbert@redhat.com \
--cc=kwolf@redhat.com \
--cc=lvivier@redhat.com \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).