qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <rth@twiddle.net>
To: qemu-devel@nongnu.org
Cc: aurelien@aurel32.net
Subject: [Qemu-devel] [PATCH 10/16] tcg: Avoid loops against variable bounds
Date: Tue, 20 Jun 2017 19:48:25 -0700	[thread overview]
Message-ID: <20170621024831.26019-11-rth@twiddle.net> (raw)
In-Reply-To: <20170621024831.26019-1-rth@twiddle.net>

Copy s->nb_globals or s->nb_temps to a local variable for the purposes
of iteration.  This should allow the compiler to use low-overhead
looping constructs on some hosts.

Signed-off-by: Richard Henderson <rth@twiddle.net>
---
 tcg/tcg.c | 27 ++++++++++-----------------
 1 file changed, 10 insertions(+), 17 deletions(-)

diff --git a/tcg/tcg.c b/tcg/tcg.c
index e78140b..c228f1e 100644
--- a/tcg/tcg.c
+++ b/tcg/tcg.c
@@ -943,23 +943,16 @@ void tcg_gen_callN(TCGContext *s, void *func, TCGArg ret,
 
 static void tcg_reg_alloc_start(TCGContext *s)
 {
-    int i;
+    int i, n;
     TCGTemp *ts;
-    for(i = 0; i < s->nb_globals; i++) {
+
+    for (i = 0, n = s->nb_globals; i < n; i++) {
         ts = &s->temps[i];
-        if (ts->fixed_reg) {
-            ts->val_type = TEMP_VAL_REG;
-        } else {
-            ts->val_type = TEMP_VAL_MEM;
-        }
+        ts->val_type = (ts->fixed_reg ? TEMP_VAL_REG : TEMP_VAL_MEM);
     }
-    for(i = s->nb_globals; i < s->nb_temps; i++) {
+    for (n = s->nb_temps; i < n; i++) {
         ts = &s->temps[i];
-        if (ts->temp_local) {
-            ts->val_type = TEMP_VAL_MEM;
-        } else {
-            ts->val_type = TEMP_VAL_DEAD;
-        }
+        ts->val_type = (ts->temp_local ? TEMP_VAL_MEM : TEMP_VAL_DEAD);
         ts->mem_allocated = 0;
         ts->fixed_reg = 0;
     }
@@ -2050,9 +2043,9 @@ static void temp_save(TCGContext *s, TCGTemp *ts, TCGRegSet allocated_regs)
    temporary registers needs to be allocated to store a constant. */
 static void save_globals(TCGContext *s, TCGRegSet allocated_regs)
 {
-    int i;
+    int i, n;
 
-    for (i = 0; i < s->nb_globals; i++) {
+    for (i = 0, n = s->nb_globals; i < n; i++) {
         temp_save(s, &s->temps[i], allocated_regs);
     }
 }
@@ -2062,9 +2055,9 @@ static void save_globals(TCGContext *s, TCGRegSet allocated_regs)
    temporary registers needs to be allocated to store a constant. */
 static void sync_globals(TCGContext *s, TCGRegSet allocated_regs)
 {
-    int i;
+    int i, n;
 
-    for (i = 0; i < s->nb_globals; i++) {
+    for (i = 0, n = s->nb_globals; i < n; i++) {
         TCGTemp *ts = &s->temps[i];
         tcg_debug_assert(ts->val_type != TEMP_VAL_REG
                          || ts->fixed_reg
-- 
2.9.4

  parent reply	other threads:[~2017-06-21  2:48 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-21  2:48 [Qemu-devel] [PATCH 00/16] Cleanups within TCG middle-end Richard Henderson
2017-06-21  2:48 ` [Qemu-devel] [PATCH 01/16] tcg: Merge opcode arguments into TCGOp Richard Henderson
2017-06-26 14:44   ` Alex Bennée
2017-06-26 14:55     ` Richard Henderson
2017-06-21  2:48 ` [Qemu-devel] [PATCH 02/16] tcg: Propagate args to op->args in optimizer Richard Henderson
2017-06-26 14:53   ` Alex Bennée
2017-06-21  2:48 ` [Qemu-devel] [PATCH 03/16] tcg: Propagate args to op->args in tcg.c Richard Henderson
2017-06-26 15:02   ` Alex Bennée
2017-06-26 15:07     ` Richard Henderson
2017-06-21  2:48 ` [Qemu-devel] [PATCH 04/16] tcg: Propagate TCGOp down to allocators Richard Henderson
2017-06-26 15:08   ` Alex Bennée
2017-06-21  2:48 ` [Qemu-devel] [PATCH 05/16] tcg: Introduce arg_temp Richard Henderson
2017-06-26 16:37   ` Alex Bennée
2017-06-21  2:48 ` [Qemu-devel] [PATCH 06/16] tcg: Add temp_global bit to TCGTemp Richard Henderson
2017-06-27  8:39   ` Alex Bennée
2017-06-27 16:17     ` Richard Henderson
2017-06-28  8:52       ` Alex Bennée
2017-06-21  2:48 ` [Qemu-devel] [PATCH 07/16] tcg: Return NULL temp for TCG_CALL_DUMMY_ARG Richard Henderson
2017-06-27  8:47   ` Alex Bennée
2017-06-27 16:36     ` Richard Henderson
2017-06-21  2:48 ` [Qemu-devel] [PATCH 08/16] tcg: Introduce temp_arg Richard Henderson
2017-06-21  2:48 ` [Qemu-devel] [PATCH 09/16] tcg: Use per-temp state data in liveness Richard Henderson
2017-06-27  8:57   ` Alex Bennée
2017-06-27 16:39     ` Richard Henderson
2017-06-21  2:48 ` Richard Henderson [this message]
2017-06-27  9:01   ` [Qemu-devel] [PATCH 10/16] tcg: Avoid loops against variable bounds Alex Bennée
2017-06-21  2:48 ` [Qemu-devel] [PATCH 11/16] tcg: Change temp_allocate_frame arg to TCGTemp Richard Henderson
2017-06-21  2:48 ` [Qemu-devel] [PATCH 12/16] tcg: Remove unused TCG_CALL_DUMMY_TCGV Richard Henderson
2017-06-27  9:42   ` Alex Bennée
2017-06-21  2:48 ` [Qemu-devel] [PATCH 13/16] tcg: Export temp_idx Richard Henderson
2017-06-27  9:46   ` Alex Bennée
2017-06-27 16:43     ` Richard Henderson
2017-06-21  2:48 ` [Qemu-devel] [PATCH 14/16] tcg: Use per-temp state data in optimize Richard Henderson
2017-06-27  9:59   ` Alex Bennée
2017-06-21  2:48 ` [Qemu-devel] [PATCH 15/16] tcg: Define separate structures for TCGv_* Richard Henderson
2017-06-21  2:48 ` [Qemu-devel] [PATCH 16/16] tcg: Store pointers to temporaries directly in TCGArg Richard Henderson
2017-06-21  3:43 ` [Qemu-devel] [PATCH 00/16] Cleanups within TCG middle-end no-reply
2017-06-26 16:49 ` Alex Bennée
2017-06-26 17:47   ` Richard Henderson
2017-06-26 19:19     ` Alex Bennée

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170621024831.26019-11-rth@twiddle.net \
    --to=rth@twiddle.net \
    --cc=aurelien@aurel32.net \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).