From: Laurent Vivier <laurent@vivier.eu>
To: qemu-devel@nongnu.org
Cc: Aurelien Jarno <aurelien@aurel32.net>,
Richard Henderson <rth@twiddle.net>,
Laurent Vivier <laurent@vivier.eu>
Subject: [Qemu-devel] [PATCH 2/7] target/m68k: add fmovecr
Date: Sun, 25 Jun 2017 21:21:20 +0200 [thread overview]
Message-ID: <20170625192125.9992-3-laurent@vivier.eu> (raw)
In-Reply-To: <20170625192125.9992-1-laurent@vivier.eu>
fmovecr moves a floating point constant from the
FPU ROM to a floating point register.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
target/m68k/fpu_helper.c | 30 ++++++++++++++++++++++++++++++
target/m68k/helper.h | 1 +
target/m68k/translate.c | 13 ++++++++++++-
3 files changed, 43 insertions(+), 1 deletion(-)
diff --git a/target/m68k/fpu_helper.c b/target/m68k/fpu_helper.c
index a9e17f5..912c0b7 100644
--- a/target/m68k/fpu_helper.c
+++ b/target/m68k/fpu_helper.c
@@ -23,6 +23,31 @@
#include "exec/helper-proto.h"
#include "exec/exec-all.h"
+static const floatx80 fpu_rom[128] = {
+ [0x00] = floatx80_pi, /* Pi */
+ [0x0b] = make_floatx80(0x3ffd, 0x9a209a84fbcff798ULL), /* Log10(2) */
+ [0x0c] = make_floatx80(0x4000, 0xadf85458a2bb4a9aULL), /* e */
+ [0x0d] = make_floatx80(0x3fff, 0xb8aa3b295c17f0bcULL), /* Log2(e) */
+ [0x0e] = make_floatx80(0x3ffd, 0xde5bd8a937287195ULL), /* Log10(e) */
+ [0x0f] = floatx80_zero, /* Zero */
+ [0x30] = floatx80_ln2, /* ln(2) */
+ [0x31] = make_floatx80(0x4000, 0x935d8dddaaa8ac17ULL), /* ln(10) */
+ [0x32] = floatx80_one, /* 10^0 */
+ [0x33] = make_floatx80(0x4002, 0xa000000000000000ULL), /* 10^1 */
+ [0x34] = make_floatx80(0x4005, 0xc800000000000000ULL), /* 10^2 */
+ [0x35] = make_floatx80(0x400c, 0x9c40000000000000ULL), /* 10^4 */
+ [0x36] = make_floatx80(0x4019, 0xbebc200000000000ULL), /* 10^8 */
+ [0x37] = make_floatx80(0x4034, 0x8e1bc9bf04000000ULL), /* 10^16 */
+ [0x38] = make_floatx80(0x4069, 0x9dc5ada82b70b59eULL), /* 10^32 */
+ [0x39] = make_floatx80(0x40d3, 0xc2781f49ffcfa6d5ULL), /* 10^64 */
+ [0x3a] = make_floatx80(0x41a8, 0x93ba47c980e98ce0ULL), /* 10^128 */
+ [0x3b] = make_floatx80(0x4351, 0xaa7eebfb9df9de8eULL), /* 10^256 */
+ [0x3c] = make_floatx80(0x46a3, 0xe319a0aea60e91c7ULL), /* 10^512 */
+ [0x3d] = make_floatx80(0x4d48, 0xc976758681750c17ULL), /* 10^1024 */
+ [0x3e] = make_floatx80(0x5a92, 0x9e8b3b5dc53d5de5ULL), /* 10^2048 */
+ [0x3f] = make_floatx80(0x7525, 0xc46052028a20979bULL), /* 10^4096 */
+};
+
int32_t HELPER(reds32)(CPUM68KState *env, FPReg *val)
{
return floatx80_to_int32(val->d, &env->fp_status);
@@ -204,3 +229,8 @@ void HELPER(ftst)(CPUM68KState *env, FPReg *val)
}
env->fpsr = (env->fpsr & ~FPSR_CC_MASK) | cc;
}
+
+void HELPER(fconst)(CPUM68KState *env, FPReg *val, uint32_t offset)
+{
+ val->d = fpu_rom[offset];
+}
diff --git a/target/m68k/helper.h b/target/m68k/helper.h
index 98cbf18..d6e80e4 100644
--- a/target/m68k/helper.h
+++ b/target/m68k/helper.h
@@ -35,6 +35,7 @@ DEF_HELPER_4(fdiv, void, env, fp, fp, fp)
DEF_HELPER_FLAGS_3(fcmp, TCG_CALL_NO_RWG, void, env, fp, fp)
DEF_HELPER_FLAGS_2(set_fpcr, TCG_CALL_NO_RWG, void, env, i32)
DEF_HELPER_FLAGS_2(ftst, TCG_CALL_NO_RWG, void, env, fp)
+DEF_HELPER_3(fconst, void, env, fp, i32)
DEF_HELPER_3(mac_move, void, env, i32, i32)
DEF_HELPER_3(macmulf, i64, env, i32, i32)
diff --git a/target/m68k/translate.c b/target/m68k/translate.c
index 099cb69..a54da87 100644
--- a/target/m68k/translate.c
+++ b/target/m68k/translate.c
@@ -4510,6 +4510,7 @@ static void gen_op_fmove_fcr(CPUM68KState *env, DisasContext *s,
DISAS_INSN(fpu)
{
uint16_t ext;
+ uint8_t rom_offset;
int opmode;
TCGv tmp32;
int opsize;
@@ -4518,10 +4519,20 @@ DISAS_INSN(fpu)
ext = read_im16(env, s);
opmode = ext & 0x7f;
switch ((ext >> 13) & 7) {
- case 0: case 2:
+ case 0:
break;
case 1:
goto undef;
+ case 2:
+ if (insn == 0xf200 && (ext & 0xfc00) == 0x5c00) {
+ /* fmovecr */
+ rom_offset = ext & 0x7f;
+ cpu_dest = gen_fp_ptr(REG(ext, 7));
+ gen_helper_fconst(cpu_env, cpu_dest, tcg_const_i32(rom_offset));
+ tcg_temp_free_ptr(cpu_dest);
+ return;
+ }
+ break;
case 3: /* fmove out */
cpu_src = gen_fp_ptr(REG(ext, 7));
opsize = ext_opsize(ext, 10);
--
2.9.4
next prev parent reply other threads:[~2017-06-25 19:22 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-25 19:21 [Qemu-devel] [PATCH 0/7] target/m68k: implement 680x0 FPU (part 2) Laurent Vivier
2017-06-25 19:21 ` [Qemu-devel] [PATCH 1/7] target/m68k: add fscc Laurent Vivier
2017-06-25 20:42 ` Richard Henderson
2017-06-25 19:21 ` Laurent Vivier [this message]
2017-06-26 18:15 ` [Qemu-devel] [PATCH 2/7] target/m68k: add fmovecr Richard Henderson
2017-06-25 19:21 ` [Qemu-devel] [PATCH 3/7] target/m68k: add fsglmul and fsgldiv Laurent Vivier
2017-06-25 19:44 ` Philippe Mathieu-Daudé
2017-06-26 8:05 ` Laurent Vivier
2017-06-26 13:34 ` Richard Henderson
2017-06-25 19:21 ` [Qemu-devel] [PATCH 4/7] target/m68k: add explicit single and double precision operations Laurent Vivier
2017-06-26 18:26 ` Richard Henderson
2017-06-25 19:21 ` [Qemu-devel] [PATCH 5/7] softfloat: define floatx80_round() Laurent Vivier
2017-06-26 18:29 ` Richard Henderson
2017-06-26 19:07 ` Richard Henderson
2017-06-25 19:21 ` [Qemu-devel] [PATCH 6/7] target/m68k: add explicit single and double precision operations (part 2) Laurent Vivier
2017-06-26 18:30 ` Richard Henderson
2017-06-25 19:21 ` [Qemu-devel] [PATCH 7/7] target/m68k: add fmovem Laurent Vivier
2017-06-26 18:40 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170625192125.9992-3-laurent@vivier.eu \
--to=laurent@vivier.eu \
--cc=aurelien@aurel32.net \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).