From: "Emilio G. Cota" <cota@braap.org>
To: qemu-devel@nongnu.org
Cc: Richard Henderson <rth@twiddle.net>
Subject: [Qemu-devel] [PATCH] fixup: missed some TLS variables
Date: Fri, 30 Jun 2017 21:47:54 -0400 [thread overview]
Message-ID: <20170701014754.GA32043@flamenco> (raw)
In-Reply-To: <1498768109-4092-7-git-send-email-cota@braap.org>
On Thu, Jun 29, 2017 at 16:28:28 -0400, Emilio G. Cota wrote:
> XXX: After allowing tb_gen_code to run in parallel (see next patch),
> crashes due to races in TCG code are found very quickly with -smp > 1
> (e.g. "tcg/tcg.c:233: tcg_out_label: Assertion `!l->has_value' failed.")
> Note that with -smp 1 it works fine; with smp > 1 I can make it
> fail later with "taskset -c 0", so clearly there is a race going on.
Fixed! I missed a few __thread's -- see below.
I found the missing ones by moving tb_lock around and using
'valgrind --tool=drd' (it's not ThreadSanitizer, but it doesn't
choke on our coroutines and it's reasonably fast).
Preliminary tests show even with patch 6 we don't gain almost anything
when booting 64 cores (on a 64-core host), which is what I expected
(we still have to acquire tb_lock on each translation, even if only
for a few instructions, which is a scalability killer). But I'd
worry about optimisations later; for now I'll focus on cleaning up
the patchset, so my next steps are:
- Apply Richard's feedback so far
- Consolidate TLS variables into TCGContext, so that we'll have
as little TLS variables as possible.
Cheers,
E.
--- 8< ----
Signed-off-by: Emilio G. Cota <cota@braap.org>
---
include/exec/gen-icount.h | 2 +-
tcg/optimize.c | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/exec/gen-icount.h b/include/exec/gen-icount.h
index 62d462e..2e2bc7b 100644
--- a/include/exec/gen-icount.h
+++ b/include/exec/gen-icount.h
@@ -6,7 +6,7 @@
/* Helpers for instruction counting code generation. */
static int icount_start_insn_idx;
-static TCGLabel *exitreq_label;
+static TCG_THREAD TCGLabel *exitreq_label;
static inline void gen_tb_start(TranslationBlock *tb)
{
diff --git a/tcg/optimize.c b/tcg/optimize.c
index adfc56c..71af19b 100644
--- a/tcg/optimize.c
+++ b/tcg/optimize.c
@@ -40,8 +40,8 @@ struct tcg_temp_info {
tcg_target_ulong mask;
};
-static struct tcg_temp_info temps[TCG_MAX_TEMPS];
-static TCGTempSet temps_used;
+static TCG_THREAD struct tcg_temp_info temps[TCG_MAX_TEMPS];
+static TCG_THREAD TCGTempSet temps_used;
static inline bool temp_is_const(TCGArg arg)
{
--
2.7.4
next prev parent reply other threads:[~2017-07-01 1:48 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-29 20:28 [Qemu-devel] [RFC 0/7] tcg: parallel code generation (Work in Progress) Emilio G. Cota
2017-06-29 20:28 ` [Qemu-devel] [RFC 1/7] exec-all: fix typos in TranslationBlock's documentation Emilio G. Cota
2017-06-30 6:17 ` Richard Henderson
2017-06-29 20:28 ` [Qemu-devel] [RFC 2/7] translate-all: add out_size field to TranslationBlock Emilio G. Cota
2017-06-30 6:31 ` Richard Henderson
2017-06-29 20:28 ` [Qemu-devel] [RFC 3/7] translate-all: use a binary search tree to track TBs in TBContext Emilio G. Cota
2017-06-30 7:41 ` Richard Henderson
2017-06-30 7:49 ` Richard Henderson
2017-06-30 14:55 ` Emilio G. Cota
2017-06-29 20:28 ` [Qemu-devel] [RFC 4/7] translate-all: report correct avg host TB size Emilio G. Cota
2017-06-30 7:50 ` Richard Henderson
2017-06-29 20:28 ` [Qemu-devel] [RFC 5/7] tcg: take tb_ctx out of TCGContext Emilio G. Cota
2017-06-30 7:58 ` Richard Henderson
2017-06-29 20:28 ` [Qemu-devel] [RFC 6/7] [XXX] tcg: make TCGContext thread-local for softmmu Emilio G. Cota
2017-06-30 8:18 ` Richard Henderson
2017-07-01 1:54 ` Emilio G. Cota
2017-07-01 1:47 ` Emilio G. Cota [this message]
2017-06-29 20:28 ` [Qemu-devel] [RFC 7/7] [XXX] translate-all: generate TCG code without holding tb_lock Emilio G. Cota
2017-06-30 8:25 ` [Qemu-devel] [RFC 0/7] tcg: parallel code generation (Work in Progress) Richard Henderson
2017-07-01 2:00 ` Emilio G. Cota
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170701014754.GA32043@flamenco \
--to=cota@braap.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).