From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Cc: qemu-block@nongnu.org, qemu-devel@nongnu.org,
pbonzini@redhat.com, armbru@redhat.com, eblake@redhat.com,
famz@redhat.com, stefanha@redhat.com, quintela@redhat.com,
mreitz@redhat.com, kwolf@redhat.com, peter.maydell@linaro.org,
den@openvz.org, jsnow@redhat.com, lirans@il.ibm.com
Subject: Re: [Qemu-devel] [PATCH v7 03/16] migration: split common postcopy out of ram postcopy
Date: Tue, 11 Jul 2017 14:06:51 +0100 [thread overview]
Message-ID: <20170711130650.GD2223@work-vm> (raw)
In-Reply-To: <20170710163029.129912-4-vsementsov@virtuozzo.com>
* Vladimir Sementsov-Ogievskiy (vsementsov@virtuozzo.com) wrote:
> Split common postcopy staff from ram postcopy staff.
>
> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
I'm OK with this; I'm not sure I'd have bothered making the ping's
dependent on it being RAM.
(These first few are pretty much a separable series).
Note a few things below I'd prefer if you reroll:
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
> ---
> migration/migration.c | 39 ++++++++++++++++++++++++++-------------
> migration/migration.h | 2 ++
> migration/savevm.c | 48 +++++++++++++++++++++++++++++++++++++++---------
> 3 files changed, 67 insertions(+), 22 deletions(-)
>
> diff --git a/migration/migration.c b/migration/migration.c
> index 51ccd1a4c5..d3a2fd405a 100644
> --- a/migration/migration.c
> +++ b/migration/migration.c
> @@ -1221,6 +1221,11 @@ bool migrate_postcopy_ram(void)
> return s->enabled_capabilities[MIGRATION_CAPABILITY_POSTCOPY_RAM];
> }
>
> +bool migrate_postcopy(void)
> +{
> + return migrate_postcopy_ram();
> +}
> +
> bool migrate_auto_converge(void)
> {
> MigrationState *s;
> @@ -1577,9 +1582,11 @@ static int postcopy_start(MigrationState *ms, bool *old_vm_running)
> * need to tell the destination to throw any pages it's already received
> * that are dirty
> */
> - if (ram_postcopy_send_discard_bitmap(ms)) {
> - error_report("postcopy send discard bitmap failed");
> - goto fail;
> + if (migrate_postcopy_ram()) {
> + if (ram_postcopy_send_discard_bitmap(ms)) {
I'd rather:
if (migrate_postcopy_ram() &&
ram_postcopy_send_discard_bitmap(ms)) {
avoiding one extra layer of {}'s
Dave
> + error_report("postcopy send discard bitmap failed");
> + goto fail;
> + }
> }
>
> /*
> @@ -1588,8 +1595,10 @@ static int postcopy_start(MigrationState *ms, bool *old_vm_running)
> * wrap their state up here
> */
> qemu_file_set_rate_limit(ms->to_dst_file, INT64_MAX);
> - /* Ping just for debugging, helps line traces up */
> - qemu_savevm_send_ping(ms->to_dst_file, 2);
> + if (migrate_postcopy_ram()) {
> + /* Ping just for debugging, helps line traces up */
> + qemu_savevm_send_ping(ms->to_dst_file, 2);
> + }
>
> /*
> * While loading the device state we may trigger page transfer
> @@ -1614,7 +1623,9 @@ static int postcopy_start(MigrationState *ms, bool *old_vm_running)
> qemu_savevm_send_postcopy_listen(fb);
>
> qemu_savevm_state_complete_precopy(fb, false, false);
> - qemu_savevm_send_ping(fb, 3);
> + if (migrate_postcopy_ram()) {
> + qemu_savevm_send_ping(fb, 3);
> + }
>
> qemu_savevm_send_postcopy_run(fb);
>
> @@ -1649,11 +1660,13 @@ static int postcopy_start(MigrationState *ms, bool *old_vm_running)
>
> qemu_mutex_unlock_iothread();
>
> - /*
> - * Although this ping is just for debug, it could potentially be
> - * used for getting a better measurement of downtime at the source.
> - */
> - qemu_savevm_send_ping(ms->to_dst_file, 4);
> + if (migrate_postcopy_ram()) {
> + /*
> + * Although this ping is just for debug, it could potentially be
> + * used for getting a better measurement of downtime at the source.
> + */
> + qemu_savevm_send_ping(ms->to_dst_file, 4);
> + }
>
> if (migrate_release_ram()) {
> ram_postcopy_migrated_memory_release(ms);
> @@ -1831,7 +1844,7 @@ static void *migration_thread(void *opaque)
> qemu_savevm_send_ping(s->to_dst_file, 1);
> }
>
> - if (migrate_postcopy_ram()) {
> + if (migrate_postcopy()) {
> /*
> * Tell the destination that we *might* want to do postcopy later;
> * if the other end can't do postcopy it should fail now, nice and
> @@ -1864,7 +1877,7 @@ static void *migration_thread(void *opaque)
> if (pending_size && pending_size >= threshold_size) {
> /* Still a significant amount to transfer */
>
> - if (migrate_postcopy_ram() &&
> + if (migrate_postcopy() &&
> s->state != MIGRATION_STATUS_POSTCOPY_ACTIVE &&
> pend_nonpost <= threshold_size &&
> atomic_read(&s->start_postcopy)) {
> diff --git a/migration/migration.h b/migration/migration.h
> index 148c9facbc..1d974bacce 100644
> --- a/migration/migration.h
> +++ b/migration/migration.h
> @@ -165,6 +165,8 @@ bool migration_is_blocked(Error **errp);
> bool migration_in_postcopy(void);
> MigrationState *migrate_get_current(void);
>
> +bool migrate_postcopy(void);
> +
> bool migrate_release_ram(void);
> bool migrate_postcopy_ram(void);
> bool migrate_zero_blocks(void);
> diff --git a/migration/savevm.c b/migration/savevm.c
> index 37da83509f..cf79e1d3ac 100644
> --- a/migration/savevm.c
> +++ b/migration/savevm.c
> @@ -89,7 +89,7 @@ static struct mig_cmd_args {
> [MIG_CMD_INVALID] = { .len = -1, .name = "INVALID" },
> [MIG_CMD_OPEN_RETURN_PATH] = { .len = 0, .name = "OPEN_RETURN_PATH" },
> [MIG_CMD_PING] = { .len = sizeof(uint32_t), .name = "PING" },
> - [MIG_CMD_POSTCOPY_ADVISE] = { .len = 16, .name = "POSTCOPY_ADVISE" },
> + [MIG_CMD_POSTCOPY_ADVISE] = { .len = -1, .name = "POSTCOPY_ADVISE" },
> [MIG_CMD_POSTCOPY_LISTEN] = { .len = 0, .name = "POSTCOPY_LISTEN" },
> [MIG_CMD_POSTCOPY_RUN] = { .len = 0, .name = "POSTCOPY_RUN" },
> [MIG_CMD_POSTCOPY_RAM_DISCARD] = {
> @@ -98,6 +98,23 @@ static struct mig_cmd_args {
> [MIG_CMD_MAX] = { .len = -1, .name = "MAX" },
> };
>
> +/* Note for MIG_CMD_POSTCOPY_ADVISE:
> + * The format of arguments is depending on postcopy mode:
> + * - postcopy RAM only
> + * uint64_t host page size
> + * uint64_t taget page size
> + *
> + * - postcopy RAM and postcopy dirty bitmaps
> + * format is the same as for postcopy RAM only
> + *
> + * - postcopy dirty bitmaps only
> + * Nothing. Command length field is 0.
> + *
> + * Be careful: adding a new postcopy entity with some other parameters should
> + * not break format self-description ability. Good way is to introduce some
> + * generic extendable format with an exception for two old entities.
> + */
> +
> static int announce_self_create(uint8_t *buf,
> uint8_t *mac_addr)
> {
> @@ -861,12 +878,17 @@ int qemu_savevm_send_packaged(QEMUFile *f, const uint8_t *buf, size_t len)
> /* Send prior to any postcopy transfer */
> void qemu_savevm_send_postcopy_advise(QEMUFile *f)
> {
> - uint64_t tmp[2];
> - tmp[0] = cpu_to_be64(ram_pagesize_summary());
> - tmp[1] = cpu_to_be64(qemu_target_page_size());
> + if (migrate_postcopy_ram()) {
> + uint64_t tmp[2];
> + tmp[0] = cpu_to_be64(ram_pagesize_summary());
> + tmp[1] = cpu_to_be64(qemu_target_page_size());
>
> - trace_qemu_savevm_send_postcopy_advise();
> - qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_ADVISE, 16, (uint8_t *)tmp);
> + trace_qemu_savevm_send_postcopy_advise();
> + qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_ADVISE,
> + 16, (uint8_t *)tmp);
> + } else {
> + qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_ADVISE, 0, NULL);
> + }
> }
>
> /* Sent prior to starting the destination running in postcopy, discard pages
> @@ -1352,6 +1374,10 @@ static int loadvm_postcopy_handle_advise(MigrationIncomingState *mis)
> return -1;
> }
>
> + if (!migrate_postcopy_ram()) {
> + return 0;
> + }
> +
> if (!postcopy_ram_supported_by_host()) {
> postcopy_state_set(POSTCOPY_INCOMING_NONE);
> return -1;
> @@ -1562,7 +1588,9 @@ static int loadvm_postcopy_handle_listen(MigrationIncomingState *mis)
> * A rare case, we entered listen without having to do any discards,
> * so do the setup that's normally done at the time of the 1st discard.
> */
> - postcopy_ram_prepare_discard(mis);
> + if (migrate_postcopy_ram()) {
> + postcopy_ram_prepare_discard(mis);
> + }
> }
>
> /*
> @@ -1570,8 +1598,10 @@ static int loadvm_postcopy_handle_listen(MigrationIncomingState *mis)
> * However, at this point the CPU shouldn't be running, and the IO
> * shouldn't be doing anything yet so don't actually expect requests
> */
> - if (postcopy_ram_enable_notify(mis)) {
> - return -1;
> + if (migrate_postcopy_ram()) {
> + if (postcopy_ram_enable_notify(mis)) {
> + return -1;
> + }
> }
>
> if (mis->have_listen_thread) {
> --
> 2.11.1
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
next prev parent reply other threads:[~2017-07-11 13:07 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-10 16:30 [Qemu-devel] [PATCH v7 00/16] Dirty bitmaps postcopy migration Vladimir Sementsov-Ogievskiy
2017-07-10 16:30 ` [Qemu-devel] [PATCH v7 01/16] migration: add has_postcopy savevm handler Vladimir Sementsov-Ogievskiy
2017-07-10 16:30 ` [Qemu-devel] [PATCH v7 02/16] migration: fix ram_save_pending Vladimir Sementsov-Ogievskiy
2017-07-10 16:30 ` [Qemu-devel] [PATCH v7 03/16] migration: split common postcopy out of ram postcopy Vladimir Sementsov-Ogievskiy
2017-07-11 13:06 ` Dr. David Alan Gilbert [this message]
2017-07-11 13:38 ` Vladimir Sementsov-Ogievskiy
2017-08-21 23:34 ` John Snow
2017-09-18 14:07 ` [Qemu-devel] ping " Vladimir Sementsov-Ogievskiy
2017-09-19 19:06 ` Dr. David Alan Gilbert
2017-09-20 11:45 ` Juan Quintela
2017-09-25 13:23 ` Kevin Wolf
2017-09-25 14:31 ` Vladimir Sementsov-Ogievskiy
2017-09-25 14:58 ` Kevin Wolf
2017-09-25 15:07 ` Vladimir Sementsov-Ogievskiy
2017-09-25 15:27 ` Dr. David Alan Gilbert
2017-09-26 10:12 ` Kevin Wolf
2017-09-26 10:21 ` Dr. David Alan Gilbert
2017-09-26 12:32 ` Kevin Wolf
2017-07-10 16:30 ` [Qemu-devel] [PATCH v7 04/16] migration: introduce postcopy-only pending Vladimir Sementsov-Ogievskiy
2017-07-10 16:30 ` [Qemu-devel] [PATCH v7 05/16] block/dirty-bitmap: add bdrv_dirty_bitmap_enable_successor() Vladimir Sementsov-Ogievskiy
2017-07-10 16:30 ` [Qemu-devel] [PATCH v7 06/16] qapi: add dirty-bitmaps migration capability Vladimir Sementsov-Ogievskiy
2017-07-10 21:03 ` Eric Blake
2017-07-10 16:30 ` [Qemu-devel] [PATCH v7 07/16] block/dirty-bitmap: add bdrv_dirty_bitmap_release_successor Vladimir Sementsov-Ogievskiy
2017-08-14 9:37 ` Vladimir Sementsov-Ogievskiy
2017-07-10 16:30 ` [Qemu-devel] [PATCH v7 08/16] migration: include migrate_dirty_bitmaps in migrate_postcopy Vladimir Sementsov-Ogievskiy
2017-07-10 16:30 ` [Qemu-devel] [PATCH v7 09/16] migration/qemu-file: add qemu_put_counted_string() Vladimir Sementsov-Ogievskiy
2017-07-10 16:30 ` [Qemu-devel] [PATCH v7 10/16] migration: add is_active_iterate handler Vladimir Sementsov-Ogievskiy
2017-07-10 16:30 ` [Qemu-devel] [PATCH v7 11/16] block/dirty-bitmap: add bdrv_dirty_bitmap_set_frozen Vladimir Sementsov-Ogievskiy
2017-07-10 16:30 ` [Qemu-devel] [PATCH v7 12/16] migration: add postcopy migration of dirty bitmaps Vladimir Sementsov-Ogievskiy
2017-09-18 14:07 ` Vladimir Sementsov-Ogievskiy
2017-07-10 16:30 ` [Qemu-devel] [PATCH v7 13/16] iotests: add add_incoming_migration to VM class Vladimir Sementsov-Ogievskiy
2017-07-10 16:30 ` [Qemu-devel] [PATCH v7 14/16] iotests: add default node-name Vladimir Sementsov-Ogievskiy
2017-07-10 16:30 ` [Qemu-devel] [PATCH v7 15/16] iotests: add dirty bitmap migration test Vladimir Sementsov-Ogievskiy
2017-07-10 16:30 ` [Qemu-devel] [PATCH v7 16/16] iotests: add dirty bitmap postcopy test Vladimir Sementsov-Ogievskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170711130650.GD2223@work-vm \
--to=dgilbert@redhat.com \
--cc=armbru@redhat.com \
--cc=den@openvz.org \
--cc=eblake@redhat.com \
--cc=famz@redhat.com \
--cc=jsnow@redhat.com \
--cc=kwolf@redhat.com \
--cc=lirans@il.ibm.com \
--cc=mreitz@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
--cc=stefanha@redhat.com \
--cc=vsementsov@virtuozzo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).