qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, famz@redhat.com, jsnow@redhat.com,
	kwolf@redhat.com, Stefan Hajnoczi <stefanha@redhat.com>,
	Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v2 12/20] qed: Switch to .bdrv_co_block_status()
Date: Fri, 14 Jul 2017 07:14:49 -0500	[thread overview]
Message-ID: <20170714121457.10322-13-eblake@redhat.com> (raw)
In-Reply-To: <20170714121457.10322-1-eblake@redhat.com>

We are gradually moving away from sector-based interfaces, towards
byte-based.  Update the qed driver accordingly.  There is no intent
to optimize based on the mapping flag for this format.

Signed-off-by: Eric Blake <eblake@redhat.com>

---
v2: rebase to mapping flag, fix mask in qed_is_allocated_cb
---
 block/qed.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/block/qed.c b/block/qed.c
index 86cad21..a80195c 100644
--- a/block/qed.c
+++ b/block/qed.c
@@ -677,7 +677,7 @@ typedef struct {
     Coroutine *co;
     uint64_t pos;
     int64_t status;
-    int *pnum;
+    int64_t *pnum;
     BlockDriverState **file;
 } QEDIsAllocatedCB;

@@ -685,10 +685,10 @@ static void qed_is_allocated_cb(void *opaque, int ret, uint64_t offset, size_t l
 {
     QEDIsAllocatedCB *cb = opaque;
     BDRVQEDState *s = cb->bs->opaque;
-    *cb->pnum = len / BDRV_SECTOR_SIZE;
+    *cb->pnum = len;
     switch (ret) {
     case QED_CLUSTER_FOUND:
-        offset |= qed_offset_into_cluster(s, cb->pos);
+        offset |= qed_offset_into_cluster(s, cb->pos) & BDRV_BLOCK_OFFSET_MASK;
         cb->status = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | offset;
         *cb->file = cb->bs->file->bs;
         break;
@@ -710,16 +710,18 @@ static void qed_is_allocated_cb(void *opaque, int ret, uint64_t offset, size_t l
     }
 }

-static int64_t coroutine_fn bdrv_qed_co_get_block_status(BlockDriverState *bs,
-                                                 int64_t sector_num,
-                                                 int nb_sectors, int *pnum,
-                                                 BlockDriverState **file)
+static int64_t coroutine_fn bdrv_qed_co_block_status(BlockDriverState *bs,
+                                                     bool mapping,
+                                                     int64_t pos,
+                                                     int64_t bytes,
+                                                     int64_t *pnum,
+                                                     BlockDriverState **file)
 {
     BDRVQEDState *s = bs->opaque;
-    size_t len = (size_t)nb_sectors * BDRV_SECTOR_SIZE;
+    size_t len;
     QEDIsAllocatedCB cb = {
         .bs = bs,
-        .pos = (uint64_t)sector_num * BDRV_SECTOR_SIZE,
+        .pos = pos,
         .status = BDRV_BLOCK_OFFSET_MASK,
         .pnum = pnum,
         .file = file,
@@ -1541,7 +1543,7 @@ static BlockDriver bdrv_qed = {
     .bdrv_child_perm          = bdrv_format_default_perms,
     .bdrv_create              = bdrv_qed_create,
     .bdrv_has_zero_init       = bdrv_has_zero_init_1,
-    .bdrv_co_get_block_status = bdrv_qed_co_get_block_status,
+    .bdrv_co_block_status     = bdrv_qed_co_block_status,
     .bdrv_co_readv            = bdrv_qed_co_readv,
     .bdrv_co_writev           = bdrv_qed_co_writev,
     .bdrv_co_pwrite_zeroes    = bdrv_qed_co_pwrite_zeroes,
-- 
2.9.4

  parent reply	other threads:[~2017-07-14 12:15 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-14 12:14 [Qemu-devel] [PATCH v2 00/20] add byte-based block_status driver callbacks Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 01/20] block: Add .bdrv_co_block_status() callback Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 02/20] block: Switch passthrough drivers to .bdrv_co_block_status() Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 03/20] file-posix: Switch " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 04/20] gluster: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 05/20] iscsi: Switch cluster_sectors to byte-based Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 06/20] iscsi: Switch iscsi_allocmap_update() " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 07/20] iscsi: Switch to .bdrv_co_block_status() Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 08/20] null: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 09/20] parallels: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 10/20] qcow: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 11/20] qcow2: " Eric Blake
2017-07-14 12:14 ` Eric Blake [this message]
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 13/20] raw: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 14/20] sheepdog: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 15/20] vdi: Avoid bitrot of debugging code Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 16/20] vdi: Switch to .bdrv_co_block_status() Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 17/20] vmdk: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 18/20] vpc: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 19/20] vvfat: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 20/20] block: Drop unused .bdrv_co_get_block_status() Eric Blake

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170714121457.10322-13-eblake@redhat.com \
    --to=eblake@redhat.com \
    --cc=famz@redhat.com \
    --cc=jsnow@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).