From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, famz@redhat.com, jsnow@redhat.com,
kwolf@redhat.com, Ronnie Sahlberg <ronniesahlberg@gmail.com>,
Paolo Bonzini <pbonzini@redhat.com>, Peter Lieven <pl@kamp.de>,
Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v2 05/20] iscsi: Switch cluster_sectors to byte-based
Date: Fri, 14 Jul 2017 07:14:42 -0500 [thread overview]
Message-ID: <20170714121457.10322-6-eblake@redhat.com> (raw)
In-Reply-To: <20170714121457.10322-1-eblake@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Convert all uses of
the cluster size in sectors, along with adding assertions that we
are not dividing by zero.
Signed-off-by: Eric Blake <eblake@redhat.com>
---
v2: no change
---
block/iscsi.c | 56 +++++++++++++++++++++++++++++++++++---------------------
1 file changed, 35 insertions(+), 21 deletions(-)
diff --git a/block/iscsi.c b/block/iscsi.c
index 904ef20..9c96b46 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -79,7 +79,7 @@ typedef struct IscsiLun {
unsigned long *allocmap;
unsigned long *allocmap_valid;
long allocmap_size;
- int cluster_sectors;
+ int cluster_size;
bool use_16_for_rw;
bool write_protected;
bool lbpme;
@@ -460,9 +460,10 @@ static int iscsi_allocmap_init(IscsiLun *iscsilun, int open_flags)
{
iscsi_allocmap_free(iscsilun);
+ assert(iscsilun->cluster_size);
iscsilun->allocmap_size =
- DIV_ROUND_UP(sector_lun2qemu(iscsilun->num_blocks, iscsilun),
- iscsilun->cluster_sectors);
+ DIV_ROUND_UP(iscsilun->num_blocks * iscsilun->block_size,
+ iscsilun->cluster_size);
iscsilun->allocmap = bitmap_try_new(iscsilun->allocmap_size);
if (!iscsilun->allocmap) {
@@ -470,7 +471,7 @@ static int iscsi_allocmap_init(IscsiLun *iscsilun, int open_flags)
}
if (open_flags & BDRV_O_NOCACHE) {
- /* in case that cache.direct = on all allocmap entries are
+ /* when cache.direct = on all allocmap entries are
* treated as invalid to force a relookup of the block
* status on every read request */
return 0;
@@ -491,17 +492,19 @@ iscsi_allocmap_update(IscsiLun *iscsilun, int64_t sector_num,
int nb_sectors, bool allocated, bool valid)
{
int64_t cl_num_expanded, nb_cls_expanded, cl_num_shrunk, nb_cls_shrunk;
+ int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
if (iscsilun->allocmap == NULL) {
return;
}
/* expand to entirely contain all affected clusters */
- cl_num_expanded = sector_num / iscsilun->cluster_sectors;
+ assert(cluster_sectors);
+ cl_num_expanded = sector_num / cluster_sectors;
nb_cls_expanded = DIV_ROUND_UP(sector_num + nb_sectors,
- iscsilun->cluster_sectors) - cl_num_expanded;
+ cluster_sectors) - cl_num_expanded;
/* shrink to touch only completely contained clusters */
- cl_num_shrunk = DIV_ROUND_UP(sector_num, iscsilun->cluster_sectors);
- nb_cls_shrunk = (sector_num + nb_sectors) / iscsilun->cluster_sectors
+ cl_num_shrunk = DIV_ROUND_UP(sector_num, cluster_sectors);
+ nb_cls_shrunk = (sector_num + nb_sectors) / cluster_sectors
- cl_num_shrunk;
if (allocated) {
bitmap_set(iscsilun->allocmap, cl_num_expanded, nb_cls_expanded);
@@ -565,9 +568,12 @@ iscsi_allocmap_is_allocated(IscsiLun *iscsilun, int64_t sector_num,
if (iscsilun->allocmap == NULL) {
return true;
}
- size = DIV_ROUND_UP(sector_num + nb_sectors, iscsilun->cluster_sectors);
+ assert(iscsilun->cluster_size);
+ size = DIV_ROUND_UP(sector_num + nb_sectors,
+ iscsilun->cluster_size >> BDRV_SECTOR_BITS);
return !(find_next_bit(iscsilun->allocmap, size,
- sector_num / iscsilun->cluster_sectors) == size);
+ sector_num * BDRV_SECTOR_SIZE /
+ iscsilun->cluster_size) == size);
}
static inline bool iscsi_allocmap_is_valid(IscsiLun *iscsilun,
@@ -577,9 +583,12 @@ static inline bool iscsi_allocmap_is_valid(IscsiLun *iscsilun,
if (iscsilun->allocmap_valid == NULL) {
return false;
}
- size = DIV_ROUND_UP(sector_num + nb_sectors, iscsilun->cluster_sectors);
+ assert(iscsilun->cluster_size);
+ size = DIV_ROUND_UP(sector_num + nb_sectors,
+ iscsilun->cluster_size >> BDRV_SECTOR_BITS);
return (find_next_zero_bit(iscsilun->allocmap_valid, size,
- sector_num / iscsilun->cluster_sectors) == size);
+ sector_num * BDRV_SECTOR_SIZE /
+ iscsilun->cluster_size) == size);
}
static int coroutine_fn
@@ -814,16 +823,21 @@ static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
BlockDriverState *file;
/* check the block status from the beginning of the cluster
* containing the start sector */
- int64_t ret = iscsi_co_get_block_status(bs,
- sector_num - sector_num % iscsilun->cluster_sectors,
- BDRV_REQUEST_MAX_SECTORS, &pnum, &file);
+ int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
+ int head;
+ int64_t ret;
+
+ assert(cluster_sectors);
+ head = sector_num % cluster_sectors;
+ ret = iscsi_co_get_block_status(bs, sector_num - head,
+ BDRV_REQUEST_MAX_SECTORS, &pnum,
+ &file);
if (ret < 0) {
return ret;
}
/* if the whole request falls into an unallocated area we can avoid
- * to read and directly return zeroes instead */
- if (ret & BDRV_BLOCK_ZERO &&
- pnum >= nb_sectors + sector_num % iscsilun->cluster_sectors) {
+ * reading and directly return zeroes instead */
+ if (ret & BDRV_BLOCK_ZERO && pnum >= nb_sectors + head) {
qemu_iovec_memset(iov, 0, 0x00, iov->size);
return 0;
}
@@ -1963,8 +1977,8 @@ static int iscsi_open(BlockDriverState *bs, QDict *options, int flags,
* reasonable size */
if (iscsilun->bl.opt_unmap_gran * iscsilun->block_size >= 4 * 1024 &&
iscsilun->bl.opt_unmap_gran * iscsilun->block_size <= 16 * 1024 * 1024) {
- iscsilun->cluster_sectors = (iscsilun->bl.opt_unmap_gran *
- iscsilun->block_size) >> BDRV_SECTOR_BITS;
+ iscsilun->cluster_size = iscsilun->bl.opt_unmap_gran *
+ iscsilun->block_size;
if (iscsilun->lbprz) {
ret = iscsi_allocmap_init(iscsilun, bs->open_flags);
}
@@ -2170,7 +2184,7 @@ static int iscsi_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
IscsiLun *iscsilun = bs->opaque;
bdi->unallocated_blocks_are_zero = iscsilun->lbprz;
bdi->can_write_zeroes_with_unmap = iscsilun->lbprz && iscsilun->lbp.lbpws;
- bdi->cluster_size = iscsilun->cluster_sectors * BDRV_SECTOR_SIZE;
+ bdi->cluster_size = iscsilun->cluster_size;
return 0;
}
--
2.9.4
next prev parent reply other threads:[~2017-07-14 12:15 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-14 12:14 [Qemu-devel] [PATCH v2 00/20] add byte-based block_status driver callbacks Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 01/20] block: Add .bdrv_co_block_status() callback Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 02/20] block: Switch passthrough drivers to .bdrv_co_block_status() Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 03/20] file-posix: Switch " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 04/20] gluster: " Eric Blake
2017-07-14 12:14 ` Eric Blake [this message]
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 06/20] iscsi: Switch iscsi_allocmap_update() to byte-based Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 07/20] iscsi: Switch to .bdrv_co_block_status() Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 08/20] null: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 09/20] parallels: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 10/20] qcow: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 11/20] qcow2: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 12/20] qed: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 13/20] raw: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 14/20] sheepdog: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 15/20] vdi: Avoid bitrot of debugging code Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 16/20] vdi: Switch to .bdrv_co_block_status() Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 17/20] vmdk: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 18/20] vpc: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 19/20] vvfat: " Eric Blake
2017-07-14 12:14 ` [Qemu-devel] [PATCH v2 20/20] block: Drop unused .bdrv_co_get_block_status() Eric Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170714121457.10322-6-eblake@redhat.com \
--to=eblake@redhat.com \
--cc=famz@redhat.com \
--cc=jsnow@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=pbonzini@redhat.com \
--cc=pl@kamp.de \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=ronniesahlberg@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).